Changes in the moment arms of the rotator cuff and deltoid muscles with abduction and rotation.

1994 ◽  
Vol 76 (5) ◽  
pp. 667-676 ◽  
Author(s):  
J C Otis ◽  
C C Jiang ◽  
T L Wickiewicz ◽  
M G Peterson ◽  
R F Warren ◽  
...  
Keyword(s):  
2021 ◽  
Vol 9 (10_suppl5) ◽  
pp. 2325967121S0033
Author(s):  
Martine Dolan ◽  
Michael Patetta ◽  
Sonia Pradhan ◽  
Danil Rybalko ◽  
Aimee Bobko ◽  
...  

Objectives: The Rotator Cuff (RC) is formed from the subscapularis, supraspinatus, infraspinatus, and teres minor muscles and their tendinous extensions. The 4 RC tendons insert on the humeral head such that they contribute to the dynamic stability of the glenohumeral joint along with their rotational actions on the shoulder. The moment arm can be used to demonstrate the work effort potential that a specific muscle is contributing to a musculoskeletal joint rotation. The objective of this study was to break out RC muscles into multiple fibers, providing more clarity as to how individual fibers contribute to a muscle’s overall moment arm during abduction. The aims of this study are: 1.) to illustrate within each RC muscle how multiple muscle fiber lines of action work together to produce abduction in an intact shoulder 2.) to estimate the moment arm changes that take place when the intact rotator cuff goes through surgical repair with either SCR or RSA after complete supraspinatus tear. We hypothesized that the rotator cuff muscles work differently and in combination at the fiber level to bring about a resultant movement that can be assessed through the proposed method of moment arm calculation for intact RC, complete supraspinatus tear, SCR and RSA. Methods: Five fresh cadaveric shoulder specimens were used in an apparatus where each muscle was maintained in tension with the line of action towards its origin on the scapula (Figure 1). An Optotrack camera kept track of digitized points along both the origin and insertion of the rotator cuff muscles as the shoulder was abducted. Using these digitized points, multiple lines of action were created across the breadth of each muscle. Each muscle force action line was then used to calculate moment arm values during 0-90º abduction (Figure 2). Results: Moment arms calculated for multiple fiber lines spanning the tendon attachment site displayed the variance of fiber contribution and function within each muscle during abduction. Our results indicate that rather than providing a return to anatomical shoulder muscle function, RSA and SCR models produce moment arms that vary between muscles, with some contributing more to abduction and some contributing less. Highlighted below are the infraspinatus results for moment arms of individual fiber lines of action (Figure 3) and calculated mean moment arms (Figure 4) over abduction.ANOVA testing demonstrated a significant difference (p<0.001) when analyzing moment arms of intact, complete supraspinatus tear, SCR, and RSA models in teres minor and infraspinatus. There was no significant difference in moment arm values between the models in the subscapularis (p=0.148). Highlighted in Table 1 are the ANOVA testing results for infraspinatus. Conclusions: Our biomechanical analysis demonstrated sufficient sensitivity to detect differences in moment arms of the four rotator cuff muscles across a variety of models, suggesting changes to even one muscle of the shoulder will have significant implications on the function of other shoulder muscles. Furthermore, our analysis of fiber divisions within the same muscle illustrates the complex nature of the shoulder muscles themselves, and future studies should aim to better explore and model their function. The calculated percent differences from intact beautifully illustrated this complexity, as corrective RSA and SCR procedures provided better resemblance of intact anatomy within some rotator cuff muscles while creating a larger percent difference in other muscle groups. By breaking out RC muscles into multiple fibers, more clarity can be gained as to how individual fibers contribute to a muscle’s overall moment arm during abduction. This may further aid surgical decision-making, specifically for RSA where there is continued debate about whether to reconstruct portions of the RC. Given that the supraspinatus tendon is the most frequently torn tendon in the rotator cuff, especially for athletes who apply repetitive stress to the tendon, the results of this study may help inform post-operative rehabilitation by illustrating how abduction and stability are achieved after SCR and RSA.


2003 ◽  
Vol 83 (6) ◽  
pp. 1249-1259 ◽  
Author(s):  
S.C. Mitchell ◽  
M.E. DeMont

This research reports on the kinematics of lobster and snow crab walking, documents changes in the moment arms of the mero-carpopodite joint during rotation, and examines scaling effects of morphological and mechanical variables in these crustacean species. Forward walking lobsters and lateral walking crabs were recorded and images analysed to describe the kinematics of these animals, and subsequently morphometric and moment arm measurements made. During forward walking the lobster maintains fixed mero-carpopodite joint angles during both the power and recovery strokes, though each of the walking legs maintains different joint angles. Legs 3 and 5 are maintained at angles which appear to equalize the flexor and extensor moment arms, and leg 4 joint angle appears to maximize the extensor moment arm. The snow crab has a joint excursion angle of between approximately 50° to 150° and, during flat bed walking, the leading and trailing legs move through similar excursion angles. The length of the meropodite for both species are longer for the anterior two leg pairs relative to the posterior two pairs and the rate of growth of the meropodite is largely isometric for the lobster while consistently increases with positive allometry in the crab. The flexor and extensor moment arms generated as the joint undergoes flexion/extension show two distinct patterns with the extensor moment arm being maximized at relatively low joint angles (55°–115°) and the flexor moment arm reaching a plateau at joint extension with angles between 95° and 155°. The flexor apodeme possesses the largest moment arms in all legs for both species, suggesting the flexors are able to generate greater torques. It appears that, mechanically, these laterally moving animals may be ‘pulling’ with the leading legs to a greater extent than ‘pushing’ with the trailing legs.


2010 ◽  
Vol 217 (1) ◽  
pp. 26-37 ◽  
Author(s):  
T. C. Crook ◽  
S. E. Cruickshank ◽  
C. M. McGowan ◽  
N. Stubbs ◽  
A. M. Wilson ◽  
...  

Author(s):  
Iman Hazrati Ashtiani ◽  
Davood Younesian ◽  
Mehrnoosh Abedi ◽  
Ebrahim Esmailzadeh

Dynamic analysis of a partially-filled tanker train traveling on a curved track is studied in this paper. A partially-filled tanker is dynamically modeled when it is traveling along a real curved track. For three classes of tracks, rail irregularities are randomly generated by using Monte-Carlo simulation. An equivalent dynamic system is used to model sloshing motion of the fluid. Two derailment indexes i.e. derailment quotient and unloading ratio are obtained numerically as safety indicators. A parametric study is carried out to investigate how different parameters like the operational speed, fluid modeling, rail irregularities, and fluid density may affect the derailment potential. It is found that descending of the center of gravity and consequently reduction of the moment arms is more dominant than the oscillating forces due to sloshing motion.


2014 ◽  
Author(s):  
John R Hutchinson ◽  
Jeffery W Rankin ◽  
Jonas Rubenson ◽  
Kate H Rosenbluth ◽  
Robert A Siston ◽  
...  

We developed a three-dimensional, biomechanical computer model of the 36 major pelvic limb muscle groups in an ostrich (Struthio camelus) to investigate muscle function in this, the largest of extant birds and model organism for many studies of locomotor mechanics, body size, anatomy and evolution. Combined with experimental data, we use this model to test two main hypotheses. We first query whether ostriches use limb orientations (joint angles) that optimize the moment-generating capacities of their muscles during walking or running. Next, we test whether ostriches use limb orientations at mid-stance that keep their extensor muscles near maximal, and flexor muscles near minimal, moment arms. Our two hypotheses relate to the control priorities that a large bipedal animal might evolve under biomechanical constraints to achieve more effective static weight support. We find that ostriches do not use limb orientations to optimize the moment-generating capacities or moment arms of their muscles. We infer that dynamic properties of muscles or tendons might be better candidates for locomotor optimization. Regardless, general principles explaining why species choose particular joint orientations during locomotion are lacking, raising the question of whether such general principles exist or if clades evolve different patterns (e.g. weighting of muscle force-length or force-velocity properties in selecting postures). This leaves theoretical studies of muscle moment arms estimated for extinct animals at an impasse until studies of extant taxa answer these questions. Finally, we compare our model’s results against those of two prior studies of ostrich limb muscle moment arms, finding general agreement for many muscles. Some flexor and extensor muscles exhibit self-stabilization patterns (posture-dependent switches between flexor/extensor action) that ostriches may use to coordinate their locomotion. However, some conspicuous areas of disagreement in our results illustrate some cautionary principles. Importantly, tendon-travel empirical measurements of muscle moment arms must be carefully designed to preserve 3D muscle geometry lest their accuracy suffer relative to that of anatomically realistic models. The dearth of accurate experimental measurements of 3D moment arms of muscles in birds leaves uncertainty regarding the relative accuracy of different modelling or experimental datasets such as in ostriches. Our model, however, provides a comprehensive set of 3D estimates of muscle actions in ostriches for the first time, emphasizing that avian limb mechanics are highly three-dimensional and complex, and how no muscles act purely in the sagittal plane. A comparative synthesis of experiments and models such as ours could provide powerful synthesis into how anatomy, mechanics and control interact during locomotion and how these interactions evolve. Such a framework could remove obstacles impeding the analysis of muscle function in extinct taxa.


2000 ◽  
Vol 372 ◽  
pp. 262-271 ◽  
Author(s):  
Shohei Omokawa ◽  
Jaiyoung Ryu ◽  
Jin-Bo Tang ◽  
JunSoo Han ◽  
Vincent L. Kish

Author(s):  
Bogdan I. BEDELEAN ◽  
Iosif NECULĂEȘ ◽  
Cosmin G. SPÎRCHEZ ◽  
Sergiu RĂCĂȘAN

In this work, the influence of the number of dowels and the option to place the dowels in the cross section of part on the bending moment capacity of heat-treated wood dowel joints was analysed. The joints, which were made of heat-treated ash, were tested by means of a universal testing machine.The ultimate failure load and the moment arms were used to figure out the bending moment capacity of the joints loaded in compression or in tension. The number of dowels affected the tensile strength of the L-shaped heat-treated wood joints. The modality to place the dowels in the cross section of rail, namely, in collinearity or in a triangular shape, did not significantly affect the strength of the heat-treated wood dowel joints.


2016 ◽  
Vol 26 (6) ◽  
pp. 537-542 ◽  
Author(s):  
Alexandre Terrier ◽  
Valérie Parvex ◽  
Hannes A. Rüdiger

Introduction In total hip arthroplasty, cup medialisation with compensatory increase of femoral offset has been proposed to increase the moment arms of abductor muscles. However, this technique is associated with a loss of acetabular bone stock. Previous data indicates that the potential benefit is not constant among patients and is likely related to patient anatomy. Method Therefore, to be able to select patients who would benefit most from this technique, we measured several anatomical parameters of the pelvis and femur in 15 patients; and evaluated correlations between them and the changes of moment arms associated with cup medialisation. The anatomical measurements were performed on 3-D reconstructions of preoperative CT scans. The moment arms of the gluteus medius and gluteus minimus were calculated for an abduction and flexion movement using patient-specific finite element models. Results 6 anatomical parameters were correlated with muscle moment arm variations after cup medialisation. This effect was not systematic for either muscles or movements. Among all parameters, femoral anteversion was the most important parameter in explaining the effect of cup medialisation. Discussion Patients with small femoral anteversion or low-riding greater trochanter benefit more from cup medialisation in terms of moment arm increase in abduction motion.


2010 ◽  
Vol 26 (2) ◽  
pp. 224-228 ◽  
Author(s):  
Kurt Manal ◽  
Justin D. Cowder ◽  
Thomas S. Buchanan

In this article, we outline a method for computing Achilles tendon moment arm. The moment arm is computed from data collected using two reliable measurement instruments: ultrasound and video-based motion capture. Ultrasound is used to measure the perpendicular distance from the surface of the skin to the midline of the tendon. Motion capture is used to determine the perpendicular distance from the bottom of the probe to the ankle joint center. The difference between these two measures is the Achilles tendon moment arm. Unlike other methods, which require an angular change in joint position to approximate the moment arm, the hybrid method can be used to compute the moment arm directly at a specific joint angle. As a result, the hybrid method involves fewer error-prone measurements and the moment arm can be computed at the limits of the joint range of motion. The method is easy to implement and uses modalities that are less costly and more accessible than MRI. Preliminary testing using a lamb shank as a surrogate for a human ankle revealed good accuracy (3.3% error). We believe the hybrid method outlined here can be used to measure subject-specific moment arms in vivo and thus will potentially benefit research projects investigating ankle mechanics.


Sign in / Sign up

Export Citation Format

Share Document