scholarly journals Effect of Electrolyte Composition on Structural and Photoelectrochemical Properties of Titanium Dioxide Nanotube Arrays Synthesized by Anodization Technique

2020 ◽  
Vol 17 (4) ◽  
pp. 1183
Author(s):  
Tabarak Jafar Awaid ◽  
Asmaa Kadim Ayal ◽  
Ahlam Mohammed Farhan ◽  
Muna Sarhan Sando ◽  
Lim Ying Chin
Keyword(s):  
Ethylene Glycol ◽  
Diffuse Reflectance ◽  
Electrolyte Composition ◽  
Nanotube Arrays ◽  
Halogen Lamp ◽  
Photoelectrochemical Properties ◽  
X Ray ◽  
Photoelectrochemical Response ◽  
Titanium Dioxide Nanotube Arrays ◽  
Uv Visible

The present work involves studying the effect of electrolyte composition [@1= 0.5 wt.%  NH4F / 5% H2O / 5% Glycerol (GLY)/ 90%  Ethylene Glycol (EG)] and [ @2= 0.5 wt. % NH4F / 5% H2O / 95%  Ethylene Glycol (EG)]  on the structural and photoelectrochemical properties of titania nanotubes arrays (TNTAs). TNTAs substrates were successfully carried out via anodization technique and were carried out in 40 V for one hour in different electrolytes (@1, and @2). The properties of physicochemical of TNTAs were distinguished via an X-ray Diffractometer (XRD), Field Emission Scanning Electron Microscope (FESEM), an Energy Dispersive X-ray (EDX), and UV–visible diffuse reflectance. The photoelectrochemical response of TNTAs was evaluated in 0.01M Na2S under the choppy light of a halogen lamp. TNTAs photoelectrode prepared at @1 electrolyte was not sufficient to increase the photocurrent response compared to TNTAs prepared at @2. The TNTAs photoelectrode prepared in the @2 electrolyte confirmed the highest photoconversion efficiency compared to the TNTAs photoelectrode prepared in the @1 electrolyte.

C-axis preferentially oriented and fully activated TiO2 nanotube arrays for lithium ion batteries and supercapacitors

2014 ◽  
Vol 2 (29) ◽  
pp. 11454-11464 ◽  
Author(s):  
Dengyu Pan ◽  
He Huang ◽  
Xueyuan Wang ◽  
Liang Wang ◽  
Haobo Liao ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Ethylene Glycol ◽  
Lithium Ion Batteries ◽  
Oxygen Vacancies ◽  
Lithium Ion ◽  
Tio2 Nanotube Arrays ◽  
Nanotube Arrays ◽  
High Concentration ◽  
Oxygen Conditions ◽  
Titanium Dioxide Nanotube Arrays

We report the fabrication of long titanium dioxide nanotube arrays with highly c-axis preferentially oriented crystallization and a high concentration of oxygen vacancies by second anodization in ethylene glycol and annealing under poor-oxygen conditions.

scholarly journals Visible-Light Photocatalytic Activity of N-Doped TiO2Nanotube Arrays on Acephate Degradation

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Xinlei Zhang ◽  
Juan Zhou ◽  
Yufen Gu ◽  
Ding Fan
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Nanotube Arrays ◽  
Optical Absorption Edge ◽  
X Ray ◽  
Visible Light Photocatalytic Activity ◽  
Uv Visible ◽  
Anodic Oxidation Method ◽  
Visible Light Photocatalytic ◽  
Nitrogen Doped Titanium Dioxide

Highly ordered nitrogen-doped titanium dioxide (N-doped TiO2) nanotube arrays were prepared by anodic oxidation method and then annealed in a N2atmosphere to obtain N-doped TiO2nanotube arrays. The samples were characterized with scanning electron microscope (SEM), X-ray powder diffraction (XRD), X-ray photoelectron spectrum (XPS), and UV-visible spectrophotometry (UV-vis) spectrum. Degradation of the insecticide acephate under the visible light was used as a model to examine the visible-light photocatalytic activity of N-doped TiO2nanotube arrays. The results show that N type doping has no notable effects on the morphology and structure of TiO2nanotube arrays. After N type doping, the N replaces a small amount of O in TiO2, forming an N–Ti–O structure. This shifts the optical absorption edge and enhances absorption of the visible light. N-doped TiO2nanotube arrays subjected to annealing at 500°C in N2atmosphere show the strongest photocatalytic activity and reach a degradation rate of 84% within 2 h.

scholarly journals Preparation and Characterizations of In0.1SnxZn0.85-2xS Powder Photocatalysts for Hydrogen Production under Visible Light Irradiation

2011 ◽  
Vol 364 ◽  
pp. 238-242 ◽  
Author(s):  
Kimi Melody ◽  
Yuliati Leny ◽  
Mustaffa Shamsuddin
Keyword(s):  
Hydrogen Production ◽  
Visible Light ◽  
Solid Solutions ◽  
Visible Light Irradiation ◽  
Diffuse Reflectance ◽  
Average Rate ◽  
Light Irradiation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible

A series of In0.1SnxZn0.85-2xS solid solutions was synthesized by hydrothermal method and employed as photocatalyst for photocatalytic hydrogen evolution under visible light irradiation. The structures, optical properties and morphologies of the solid solutions were studied by X-ray diffraction, diffuse reflectance UV–visible spectroscopy and field emission scanning electron microscopy. From the characterizations, it was confirmed that In0.1SnxZn0.85-2xS solid solution can be obtained and they have nanosized particles. The highest photocatalytic activity was observed on In0.1Sn0.03Zn0.79S photocatalyst, with average rate of hydrogen production 3.05 mmol/h, which was 1.2 times higher than the In0.1Zn0.85S photocatalyst.

Sensing Nanoparticulate ZnO with Benzimidazole Derivative by Fluorescence

2013 ◽  
Vol 543 ◽  
pp. 63-67
Author(s):  
Jayabharathi Jayaraman ◽  
Jayamoorthy Karunamoorthy
Keyword(s):  
Diffuse Reflectance ◽  
Electrochemical Impedance ◽  
Fluorescent Sensor ◽  
Sol Gel ◽  
Benzimidazole Derivative ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible ◽  
Doped Zno ◽  
Scanning Electron

A sensitive benzimidazole derivative fluorescent sensor for nanoparticulate ZnO has been designed and synthesized. The nanocrystalline ZnO, Ag doped ZnO and Cu doped ZnO have been synthesised by sol-gel method and characterized by powder X-ray diffraction, scanning electron microscopy (SEM) and UV-visible diffuse reflectance, photoluminescence and electrochemical impedance spectroscopies. The synthesized sensor emits fluorescence at 360 nm and this fluorescence is selectively enhanced by nanocrystalline ZnO. This technique is sensitive to detect and estimate ZnO at micro molar level. Impurities such as Ag and Cu do not hamper the sensitivity of this technique significantly. Keywords: Sensor, SEM, EDX, Impedance, Fluorescence

Photocatalysis Reactivity in the Visible Light of B-Doped TiO2 Nanotube Arrays

2013 ◽  
Vol 860-863 ◽  
pp. 907-910
Author(s):  
Xiao Xia Lin ◽  
Jia Liu ◽  
De Gang Fu
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectrum ◽  
Nanotube Arrays ◽  
X Ray Diffraction ◽  
Degradation Model ◽  
X Ray ◽  
Light Region

B-doped TiO2nanotube arrays (B-TNTs) were synthesized by anodization method combined with dip-calcination technique. The physicochemical properties and surface morphology were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and UV-Vis diffuse reflectance spectrum (DRS). Methyl blue (MB) solution was utilized as the degradation model to evaluate the photocatalytic activity of B-TNTs under visible light irradiation. The results show B-TNTs shifts the absorption edge of TiO2nanotube arrays to the visible light region and B-TNTs displays higher photocatalytic activity compared with undoped TNTs.

Preparation of Nanoparticulate YFeO3 by Ultrasonic Assisted Method and its Visible-Light Photocatalytic Properties

2014 ◽  
Vol 636 ◽  
pp. 7-10 ◽  
Author(s):  
Pei Song Tang ◽  
Chao Wan Tang ◽  
Jia Ni Ying ◽  
Dong Jing Ni ◽  
Qian Yang ◽  
...  
Keyword(s):  
Visible Light ◽  
Diffuse Reflectance ◽  
Optical Band Gap ◽  
Diffuse Reflectance Spectroscopy ◽  
High Photocatalytic Activity ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ultrasonic Assisted ◽  
Uv Visible

Using Fe (NO3)3⋅9H2O, Y(NO3)3⋅6H2O and citric acid as the main raw material, the YFeO3 nanoparticles were synthesized by ultrasonic assisted process and calcination. The YFeO3 nanoparticles were characterized by thermogravimetry and differential thermal analysis (TG-DTA), powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible diffuse reflectance spectroscopy (DRS). The results show that the perovskite structureYFeO3 (YFeO3-800) can be obtained through the calcination of ultrasonic processed YFeO3 precursors at 800 °C, and the resulting product has a particle size of 70 nm and an optical band gap of 2.0 eV. Consequently, the YFeO3-800 nanoparticles show high photocatalytic activity for decomposition of methyl orange under visible-light irradiation.

Synthesis of TiO2 Nanotube Arrays in NaOH Added Ethylene Glycol Electrolyte and the Effect of Annealing Temperature on the Nanotube Arrays to their Photocurrent Performance

2016 ◽  
Vol 701 ◽  
pp. 28-32 ◽  
Author(s):  
Mustaffa Ali Azhar Taib ◽  
G. Kawamura ◽  
Atsunori Matsuda ◽  
Mariatti Jaafar ◽  
Khairunisak Abdul Razak ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Ethylene Glycol ◽  
Annealing Temperature ◽  
Anodic Process ◽  
Nanotube Arrays ◽  
Nanotubular Structure ◽  
Titanium Dioxide Nanotube Arrays ◽  
Higher Temperature

The present study employs NaOH as an oxygen source in fluorinated ethylene glycol (EG) electrolyte for the formation of titanium dioxide nanotube arrays (TiO2 NTs) by anodic process. The nanotube formed were 125 nm in diameter with length of ~ 7 µm after 30 min of anodization. They were then annealed to study the effect of annealing temperature on the photocurrent generated by the TiO2 NTs. It is found that TiO2 NTs annealed at 400 °C has the highest photocurrent (0.716 mA cm-2 at 0.5 V vs Ag/AgCl). This is attributed to the crystallinity (mostly anatase) of the TiO2 NTs as well as the nanotubular structure which retains at this temperature but not at higher temperature.

scholarly journals Au/TiO2Reusable Photocatalysts for Dye Degradation

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Silija Padikkaparambil ◽  
Binitha Narayanan ◽  
Zahira Yaakob ◽  
Suraja Viswanathan ◽  
Siti Masrinda Tasirin
Keyword(s):  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Dye Degradation ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dye Pollutants ◽  
Transmission Electron ◽  
Uv Visible

Nanogold doped TiO2catalysts are synthesized, and their application in the photodegradation of dye pollutants is studied. The materials are characterized using different analytical techniques such as X-ray diffraction, transmission electron microscopy, UV-visible diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. The results revealed the strong interaction between the metallic gold nanoparticles and the anatase TiO2support. Au doped systems showed very good photoactivity in the degradation of dye pollutants under UV irradiation as well as in sunlight. A simple mechanism is proposed for explaining the excellent photoactivity of the systems. The reusability studies of the photocatalysts exhibited more than 98% degradation of the dye even after 10 repeated cycles.

scholarly journals Non-Invasive Study on the Sinope Gospels

Heritage ◽  
2020 ◽  
Vol 3 (4) ◽  
pp. 1269-1278
Author(s):  
Maurizio Aceto ◽  
Elisa Calà ◽  
Angelo Agostino ◽  
Gaia Fenoglio ◽  
Maria Labate ◽  
...  
Keyword(s):  
Diffuse Reflectance ◽  
Pure Gold ◽  
Late Antique ◽  
Reflectance Spectrophotometry ◽  
Purple Colour ◽  
X Ray ◽  
Non Invasive ◽  
Ultramarine Blue ◽  
Uv Visible

The 6th century Codex Sinopensis or Sinope Gospels (Paris, Bibliothèque nationale de France) is one of the most precious purple codices that survive from the Late Antique period. Together with the Vienna Genesis (Wien, Österreichische Nationalbibliothek) and the Rossano Gospels (Rossano Calabro, Museo Diocesano), it has an unusually rich decorative apparatus with scenes representing biblical episodes. It can be, therefore, considered one of the most important preserved artistic productions of the early medieval era. The manuscript has been subjected to a non-invasive diagnostic campaign to evaluate the quality of the colourants used in its decoration, to understand how the parchment was coloured, and to carry out a comparison with the Vienna Genesis and the Rossano Gospels. The techniques used were UV-visible diffuse reflectance spectrophotometry with optical fibres (FORS), X-ray fluorescence spectrometry (XRF), spectrofluorimetry, and optical microscopy. Analyses highlighted the presence of ultramarine blue, which, besides the use of pure gold for the ink and paint, certifies the high value of the manuscript. In addition, this must be seen as one of the earliest examples of its use in paintings. The purple colour of the parchment was identified as orchil, a dye extracted from lichens, similar to the results of analytical investigations carried out on other purple codices, and not the expected Tyrian purple dye.

Sign in / Sign up

Export Citation Format

Share Document