This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 196362, “Philosophy of EOR,” by Tayfun Babadagli, SPE, University of Alberta, prepared for the 2019 SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, Bali, Indonesia, 29-31 October. The paper has not been peer reviewed.
Despite the substantial investment dedicated to research-to-pilot scale investigations, the ultimate profit from enhanced oil recovery (EOR) applications has been below expectations since the 1980s (less than 10% of total production). The author writes that revisiting and challenging the knowledge and dogmatic assumptions gathered during 5 decades of EOR is necessary. In the complete paper, a philosophy for the future of EOR projects is developed through a series of questions that applies to the industry’s transition from completion of conventional EOR toward unconventional EOR.
Why Are We Afraid of EOR?
The underperformance of EOR may be explained by the following reasons:
Limitations in capturing the physics of the process for proper technical and economical assessment
Risks involved in field pilots
Securing the supply of the materials injected
Difficulties involved in EOR design
Risk resulting from economic uncertainties
Why Are There Fewer EOR Projects Than Desired?
True Drivers of EOR Applications, Technology, and Economics. Once the technical viability of an EOR project is proven, cost-effective applications can be achieved by the high-quality optimization efforts of engineers who can decide the appropriate optimization methods or at least the conditions under which a project can turn profitable.
Insufficient Attention Given to Cost-Efficient EOR Methods. Use of air as the cheapest EOR agent has been investigated substantially for field-scale projects, but its applications are still limited. Recently, air injection was demonstrated to be safe under the low-temperature oxidation process and at atmospheric pressure/temperature conditions such as those of shallow heavy-oil reservoirs. Microbial injection also offers promising possibilities as a cost-effective approach.
Fear of Most-Expensive Miscible Processes. The most-expensive EOR agents are miscible gases, or solvents, which are expected to yield the highest recovery under suitable conditions. Recyclability of the injected material from the miscible injection is an attractive part of the EOR process; however, unrecovered injectant can also be a critically limiting factor. Exploiting gas as a byproduct from other operations, however, allowed sustainable EOR development in Alaska (Prudhoe Bay), the North Sea, and Canada (Zama).
CO$$_{2}$$ Convection in Hydrocarbon Under Flowing Conditions