Conformance Solution Improved Oil Recovery in a Naturally Fractured Carbonate Well

Author(s):  
Leticia Hernandez-Solana ◽  
Jonnathan Tellez-Abaunza ◽  
Benjamin Garcia-Montoya
2006 ◽  
Author(s):  
Dick Jacob Ligthelm ◽  
Paul Jacob van den Hoek ◽  
Pascal Hos ◽  
Marinus J. Faber ◽  
Roeland Roeterdink

Author(s):  
Mohamed Saeed Shamlooh1 ◽  
Ahmed Hamza ◽  
Ibnelwaleed Hussein ◽  
Mustafa Nasser ◽  
Saeed Salehi

High water production in oil and gas wells reduces significantly the recovery factor. Mechanical as well as chemical methods are applied to shut off water productive zones. Crosslinked polymers showed high efficiency to seal off water zones in high permeability sandstone and fractured carbonate reservoirs. Moreover, emulsified polymeric formulations have been introduced for deep profile modification by changing the wettability of the rock and hence allowing selective plugging of water. This poster provides an overview of the polymeric formulations used for such application.


2009 ◽  
Author(s):  
Rene Tabary ◽  
Antoine Fornari ◽  
Brigitte Bazin ◽  
Bernard Jean Bourbiaux ◽  
Christine S.H. Dalmazzone

2008 ◽  
Author(s):  
Murat Demir ◽  
Nazan Necibe Senol Topguder ◽  
M. Yilmaz ◽  
Y. Ince ◽  
U. Karabakal ◽  
...  

SPE Journal ◽  
2021 ◽  
pp. 1-14
Author(s):  
Hang Su ◽  
Fujian Zhou ◽  
Qing Wang ◽  
Fuwei Yu ◽  
Rencheng Dong ◽  
...  

Summary Enhanced oil recovery (EOR) in fractured carbonate reservoirs is challenging because of the heterogeneous and oil-wet nature. In this work, a new application of using polymer nanospheres (PNSs) and diluted microemulsion (DME) is presented to plug fractures and enhance water imbibition to recover oil from the tight, naturally fractured carbonate reservoirs. DME with different electric charges is compared through contact-angle and core-imbibition tests to evaluate their performances on EOR. The cationic DME is chosen because it has the fastest wettability-alteration rate and thus the highest oil recovery rate. Migration and plugging efficiency tests are conducted to identify the screened particle sizes of PNSs for the target reservoir cores. PNSs with a particle size of 300 nm are demonstrated to have the best performance of in-depth propagation before swelling and plugging after swelling within the naturally fractured cores are used in this study. Then coreflooding experiments are conducted to evaluate the EOR performance when PNSs and DME are used together, and results indicate that the oil recovery rate is increased by 24.3 and 44.1% compared to using PNSs or DME alone. In the end, a microfluidic experiment is carried out to reveal how DME works with PNSs.


Sign in / Sign up

Export Citation Format

Share Document