scholarly journals Residue Regulating Homotopy Method for Strongly Nonlinear Oscillator

Author(s):  
Penghui Song ◽  
Wenming Zhang ◽  
Lei Shao

Abstract It is highly desired yet challenging to obtain analytical approximate solutions to strongly nonlinear oscillators accurately and efficiently. Here we propose a new approach, which combines the homtopy concept with a “residue-regulating” technique to construct a continuous homotopy from an initial guess solution to a high-accuracy analytical approximation of the nonlinear problems, namely the residue regulating homotopy method (RRHM). In our method, the analytical expression of each order homotopy-series solution is associated with a set of base functions which are pre-selected or generated during the previous order of approximations, while the corresponding coefficients are solved from deformation equations specified by the nonlinear equation itself and auxiliary residue functions. The convergence region, rate and final accuracy of the homotopy are controlled by a residue-regulating vector and an expansion threshold. General procedures of implementing RRHM are demonstrated using the Duffing and Van der Pol-Duffing oscillators, where approximate solutions containing abundant frequency components are successfully obtained, yielding significantly better convergence rate and performance stability compared to the other conventional homotopy-based methods.

2013 ◽  
Vol 430 ◽  
pp. 27-31 ◽  
Author(s):  
Nicolae Herisanu ◽  
Vasile Marinca

This paper is concerned with analytical treatment of nonlinear oscillation of a self-excited system. An analytic approximate technique, namely OHAM is employed for this purpose. Our procedure provides us with a convenient way to optimally control the convergence of solutions, such that the accuracy is always guaranteed. An excellent agreement of the approximate solutions with the numerical ones has been demonstrated. Three examples are given and the results reveal that the procedure is very effective and accurate, demonstrating the general validity and the great potential of the OHAM for solving strongly nonlinear problems.


2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Vasile Marinca ◽  
Nicolae Herişanu

We apply an analytical method called the Optimal Parametric Iteration Method (OPIM) to multispecies Lotka-Volterra equations. By using initial values, accurate explicit analytic solutions have been derived. The method does not depend upon small parameters and provides us with a convenient way to optimally control the convergence of the approximate solutions. An excellent agreement has been demonstrated between the obtained solutions and the numerical ones. This new approach, which can be easily applied to other strongly nonlinear problems, is very effective and yields very accurate results.


Author(s):  
Amin Gholami ◽  
Davood D. Ganji ◽  
Hadi Rezazadeh ◽  
Waleed Adel ◽  
Ahmet Bekir

Abstract The paper deals with the application of a strong method called the modified Mickens iteration technique which is used for solving a strongly nonlinear system. The system describes the motion of a simple mathematical pendulum with a particle attached to it through a stretched wire. This model has great applications especially in the area of nonlinear vibrations and oscillation systems. The proposed method depends on determining the frequency and amplitude of the system through the modified Mickens iterative approach which is a modification of the regular Mickens approach. The preliminaries of the proposed technique are present and the application to the model is discussed. The method depends on the Mickens iteration approach which transforms the considered equation into a linear form and then is solving this equation result in the approximate solution. Some examples are given to validate and illustrate the effectiveness and convenience of the method. These results are compared with other relative techniques from the literature in terms of finding the frequency of the two examined models. The method produces more accurate results when compared to these methods and is considered a strong candidate for solving other nonlinear problems with applications in science and engineering.


2017 ◽  
Vol 72 (1) ◽  
pp. 59-69 ◽  
Author(s):  
M.M. Fatih Karahan ◽  
Mehmet Pakdemirli

AbstractStrongly nonlinear cubic-quintic Duffing oscillatoris considered. Approximate solutions are derived using the multiple scales Lindstedt Poincare method (MSLP), a relatively new method developed for strongly nonlinear oscillators. The free undamped oscillator is considered first. Approximate analytical solutions of the MSLP are contrasted with the classical multiple scales (MS) method and numerical simulations. It is found that contrary to the classical MS method, the MSLP can provide acceptable solutions for the case of strong nonlinearities. Next, the forced and damped case is treated. Frequency response curves of both the MS and MSLP methods are obtained and contrasted with the numerical solutions. The MSLP method and numerical simulations are in good agreement while there are discrepancies between the MS and numerical solutions.


Author(s):  
Keijo Ruotsalainen

AbstractRecently in several papers the boundary element method has been applied to non-linear problems. In this paper we extend the analysis to strongly nonlinear boundary value problems. We shall prove the convergence and the stability of the Galerkin method in Lp spaces. Optimal order error estimates in Lp space then follow. We use the theory of A-proper mappings and monotone operators to prove convergence of the method. We note that the analysis includes the u4 -nonlinearity, which is encountered in heat radiation problems.


Author(s):  
Hossein Jafari ◽  
Hale Tajadodi ◽  
Dumitru Baleanu

AbstractIn this paper, we introduce a modified variational iteration method (MVIM) for solving Riccati differential equations. Also the fractional Riccati differential equation is solved by variational iteration method with considering Adomians polynomials for nonlinear terms. The main advantage of the MVIM is that it can enlarge the convergence region of iterative approximate solutions. Hence, the solutions obtained using the MVIM give good approximations for a larger interval. The numerical results show that the method is simple and effective.


2019 ◽  
Vol 3 (2) ◽  
pp. 26 ◽  
Author(s):  
Dumitru Baleanu ◽  
Hassan Kamil Jassim

In this paper, we apply the local fractional Laplace variational iteration method (LFLVIM) and the local fractional Laplace decomposition method (LFLDM) to obtain approximate solutions for solving the damped wave equation and dissipative wave equation within local fractional derivative operators (LFDOs). The efficiency of the considered methods are illustrated by some examples. The results obtained by LFLVIM and LFLDM are compared with the results obtained by LFVIM. The results reveal that the suggested algorithms are very effective and simple, and can be applied for linear and nonlinear problems in sciences and engineering.


2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Y. H. Qian ◽  
J. L. Pan ◽  
S. P. Chen ◽  
M. H. Yao

The exact solutions of the nonlinear vibration systems are extremely complicated to be received, so it is crucial to analyze their approximate solutions. This paper employs the spreading residue harmonic balance method (SRHBM) to derive analytical approximate solutions for the fifth-order nonlinear problem, which corresponds to the strongly nonlinear vibration of an elastically restrained beam with a lumped mass. When the SRHBM is used, the residual terms are added to improve the accuracy of approximate solutions. Illustrative examples are provided along with verifying the accuracy of the present method and are compared with the HAM solutions, the EBM solutions, and exact solutions in tables. At the same time, the phase diagrams and time history curves are drawn by the mathematical software. Through analysis and discussion, the results obtained here demonstrate that the SRHBM is an effective and robust technique for nonlinear dynamical systems. In addition, the SRHBM can be widely applied to a variety of nonlinear dynamic systems.


Open Physics ◽  
2011 ◽  
Vol 9 (3) ◽  
Author(s):  
Vasile Marinca ◽  
Nicolae Herişanu

AbstractThe aim of this paper is to introduce a new approximate method, namely the Optimal Parametric Iteration Method (OPIM) to provide an analytical approximate solution to Thomas-Fermi equation. This new iteration approach provides us with a convenient way to optimally control the convergence of the approximate solution. A good agreement between the obtained solution and some well-known results has been demonstrated. The proposed technique can be easily applied to handle other strongly nonlinear problems.


Sign in / Sign up

Export Citation Format

Share Document