scholarly journals Normal Faulting Movement During the 2020 Mw 6.4 Yutian Earthquake: A Shallow Rupture in NW Tibet Revealed by Geodetic Measurements

2020 ◽  
Author(s):  
Jiansheng Yu ◽  
Dongzhen Wang ◽  
Bin Zhao ◽  
Li Qi
Keyword(s):  
Strike Slip ◽  
Model Parameters ◽  
Fault Geometry ◽  
Normal Faulting ◽  
Geometry Model ◽  
Radar Images ◽  
The North ◽  
Altyn Tagh ◽  
Finite Fault ◽  
Stress Changes

Abstract The ENE striking Longmu Co fault and the North Altyn Tagh left-lateral slip fault have led to the complex regional structure in the northwestern Tibetan Plateau, resulting in a series of normal faulting and strike slip faulting earthquakes. Using both the ascending and descending Sentinel-1A/B radar images, we depict the coseismic deformation caused by the 2020 Yutian Mw 6.4 earthquake with a peak subsidence of ~20 cm. We determine the seismogenic fault geometry by applying the Bayesian approach with a Markov Chain Monte Carlo sampling method, which enables us to find the posterior probability density functions of the source model parameters. The estimation results reveal that the earthquake have dominantly by normal slip with moderate strike slip component. Based on the optimal fault geometry model, we extend the fault plane and invert for the finite fault model dislocation, which indicate that the slip is mainly concentrated at a shallow focal depth of 3–10 km with a maximum slip of ~1.0 m. Our preferred geodetic coseismic model exhibits no surface rupture, which may likely due to the shallow slip deficit in the uppermost crust. We calculate the combined loading effect of the Coulomb failure stress changes induced by the coseismic dislocations and postseismic viscoelastic relaxation of the 2008 Mw 7.1 and 2014 Mw 6.9 Yutian events. Our study demonstrates that the two preceding major Yutian shocks were insufficient to trigger the 2020 Yutian earthquake, which we consider perhaps reflects the natural release of elastic strain accumulated mainly through localized tectonic movement. We attribute the 2020 Yutian event to the release of extensional stress in a stepover zone controlled by the Longmu Co and the North Altyn Tagh sinistral strike slip fault systems. The seismic risk in the southwest end of the North Altyn Tagh fault has been elevated by the Yutian earthquake sequences, which require future attention.

scholarly journals THE 2014 MW 6.9 NORTH AEGEAN TROUGH (NAT) EARTHQUAKE: SEISMOLOGICAL AND GEODETIC EVIDENCE

2017 ◽  
Vol 50 (3) ◽  
pp. 1583
Author(s):  
V. Saltogianni ◽  
M. Gianniou ◽  
T. Taymaz ◽  
S. Yolsal-Çevikbilen ◽  
S. Stiros
Keyword(s):  
Broad Band ◽  
Strike Slip ◽  
Fault Geometry ◽  
Coseismic Slip ◽  
The North ◽  
Finite Fault Inversion ◽  
Seismological Data ◽  
Finite Fault ◽  
Slip History ◽  
North Aegean

A strong earthquake (Mw 6.9) on 24 May 2014 ruptured the North Aegean Trough (NAT) in Greece, west of the North Anatolian Fault Zone (NAFZ). In order to provide unbiased constrains of the rupture process and fault geometry of the earthquake, seismological and geodetic data were analyzed independently. First, based on teleseismic long-period P- and SH- waveforms a point-source solution yielded dominantly right-lateral strike-slip faulting mechanism. Furthermore, finite fault inversion of broad-band data revealed the slip history of the earthquake. Second, GPS slip vectors derived from 11 permanent GPS stations uniformly distributed around the meizoseismal area of the earthquake indicated significant horizontal coseismic slip. Inversion of GPS-derived displacements on the basis of Okada model and using the new TOPological INVersion (TOPINV) algorithm permitted to model a vertical strike slip fault, consistent with that derived from seismological data. Obtained results are consistent with the NAT structure and constrain well the fault geometry and the dynamics of the 2014 earthquake. The latter seems to fill a gap in seismicity along the NAT in the last 50 years, but seems not to have a direct relationship with the sequence of recent faulting farther east, along the NAFZ.

scholarly journals The nucleation of the Izmit and Düzce earthquakes: Some mechanical logic on where and how ruptures began

2021 ◽  
Author(s):  
Michel Bouchon ◽  
Hayrullah Karabulut ◽  
Mustafa Aktar ◽  
Serdar Özalaybey ◽  
Jean Schmittbuhl ◽  
...  
Keyword(s):  
Strike Slip ◽  
Seismic Events ◽  
Fault Geometry ◽  
Brittle Transition ◽  
The North ◽  
Impending Rupture ◽  
Natural Tendency ◽  
Ductile To Brittle Transition ◽  
Mechanical Logic ◽  
Rupture Speed

Summary In spite of growing evidence that many earthquakes are preceded by increased seismic activity, the nature of this activity is still poorly understood. Is it the result of a mostly random process related to the natural tendency of seismic events to cluster in time and space, in which case there is little hope to ever predict earthquakes? Or is it the sign that a physical process that will lead to the impending rupture has begun, in which case we should attempt to identify this process. With this aim we take a further look at the nucleation of two of the best recorded and documented strike-slip earthquakes to date, the 1999 Izmit and Düzce earthquakes which ruptured the North Anatolian Fault over ∼200 km. We show the existence of a remarkable mechanical logic linking together nucleation characteristics, stress loading, fault geometry and rupture speed. In both earthquakes the observations point to slow aseismic slip occurring near the ductile-to-brittle transition zone as the motor of their nucleation.

Is the North Altyn fault part of a strike-slip duplex along the Altyn Tagh fault system?

Geology ◽  
2000 ◽  
Vol 28 (3) ◽  
pp. 255 ◽  
Author(s):  
Eric Cowgill ◽  
An Yin ◽  
Wang Xiao Feng ◽  
Zhang Qing
Keyword(s):  
Strike Slip ◽  
Fault System ◽  
Altyn Tagh Fault ◽  
The North ◽  
Altyn Tagh

scholarly journals ANALYSING POST-SEISMIC DEFORMATION OF IZMIT EARTHQUAKE WITH INSAR, GNSS AND COULOMB STRESS MODELLING

2016 ◽  
Vol XLI-B1 ◽  
pp. 417-421 ◽  
Author(s):  
R. Alac Barut ◽  
J. Trinder ◽  
C. Rizos
Keyword(s):  
Measurement Techniques ◽  
Satellite System ◽  
Northern Region ◽  
Strike Slip ◽  
Coulomb Stress ◽  
North West ◽  
Coulomb Stress Changes ◽  
Izmit Earthquake ◽  
The North ◽  
Stress Changes

On August 17<sup>th</sup> 1999, a M<sub>w</sub> 7.4 earthquake struck the city of Izmit in the north-west of Turkey. This event was one of the most devastating earthquakes of the twentieth century. The epicentre of the Izmit earthquake was on the North Anatolian Fault (NAF) which is one of the most active right-lateral strike-slip faults on earth. However, this earthquake offers an opportunity to study how strain is accommodated in an inter-segment region of a large strike slip fault. In order to determine the Izmit earthquake post-seismic effects, the authors modelled Coulomb stress changes of the aftershocks, as well as using the deformation measurement techniques of Interferometric Synthetic Aperture Radar (InSAR) and Global Navigation Satellite System (GNSS). The authors have shown that InSAR and GNSS observations over a time period of three months after the earthquake combined with Coulomb Stress Change Modelling can explain the fault zone expansion, as well as the deformation of the northern region of the NAF. It was also found that there is a strong agreement between the InSAR and GNSS results for the post-seismic phases of investigation, with differences less than 2mm, and the standard deviation of the differences is less than 1mm.

scholarly journals Distributed earthquake focal mechanisms in the Aegean Sea

2018 ◽  
Vol 40 (3) ◽  
pp. 1125 ◽  
Author(s):  
A. Kiratzi ◽  
C. Benetatos ◽  
Z. Roumelioti
Keyword(s):  
Aegean Sea ◽  
Strike Slip ◽  
Focal Mechanisms ◽  
Normal Faulting ◽  
Small Magnitude ◽  
The North ◽  
Earthquake Focal Mechanisms ◽  
Reverse Faulting ◽  
Different Types ◽  
Transform Fault Zone

Nearly 2,000 earthquake focal mechanisms in the Aegean Sea and the surroundings for the period 1912- 2006, for 1.5 <M<7.5, and depths from 0 to 170 km, indicate a uniform distribution and smooth variation in orientation over wide regions, even for the very small magnitude earthquakes. ~ 60% of the focal mechanisms show normal faulting, that mainly strikes ~E-W. However, a zone ofN-S normal faulting runs the backbone of Albanides-Hellenides. Low-angle thrust and reverse faulting is confined in western Greece (Adria-Eurasia convergence) and along the Hellenic trench (Africa-Eurasia). In the central Aegean Sea the effect of the propagating tip of the North Anatolian Fault into the Aegean Sea is pronounced and strike-slip motions are widely distributed. Shearing does not cross central Greece. Strike-slip motions reappear in the Cephalonia-Lefkada Transform Fault zone and in western Péloponnèse, which shows very complex tectonics, with different types of faulting being oriented favourably and operating under the present stress-field. Moreover, in western Péloponnèse the sense of the observed shearing is not yet clear, whether it is dextral or sinistral, and this lack of data has significant implications for the orientation of the earthquake slip vectors compared to the GPS obtained velocity vectors.

scholarly journals ANALYSING POST-SEISMIC DEFORMATION OF IZMIT EARTHQUAKE WITH INSAR, GNSS AND COULOMB STRESS MODELLING

2016 ◽  
Vol XLI-B1 ◽  
pp. 417-421
Author(s):  
R. Alac Barut ◽  
J. Trinder ◽  
C. Rizos
Keyword(s):  
Measurement Techniques ◽  
Satellite System ◽  
Northern Region ◽  
Strike Slip ◽  
Coulomb Stress ◽  
North West ◽  
Coulomb Stress Changes ◽  
Izmit Earthquake ◽  
The North ◽  
Stress Changes

On August 17<sup>th</sup> 1999, a M<sub>w</sub> 7.4 earthquake struck the city of Izmit in the north-west of Turkey. This event was one of the most devastating earthquakes of the twentieth century. The epicentre of the Izmit earthquake was on the North Anatolian Fault (NAF) which is one of the most active right-lateral strike-slip faults on earth. However, this earthquake offers an opportunity to study how strain is accommodated in an inter-segment region of a large strike slip fault. In order to determine the Izmit earthquake post-seismic effects, the authors modelled Coulomb stress changes of the aftershocks, as well as using the deformation measurement techniques of Interferometric Synthetic Aperture Radar (InSAR) and Global Navigation Satellite System (GNSS). The authors have shown that InSAR and GNSS observations over a time period of three months after the earthquake combined with Coulomb Stress Change Modelling can explain the fault zone expansion, as well as the deformation of the northern region of the NAF. It was also found that there is a strong agreement between the InSAR and GNSS results for the post-seismic phases of investigation, with differences less than 2mm, and the standard deviation of the differences is less than 1mm.

Is the North Altyn fault part of a strike-slip duplex along the Altyn Tagh fault system?

Geology ◽  
2000 ◽  
Vol 28 (3) ◽  
pp. 255-258 ◽  
Author(s):  
Eric Cowgill ◽  
An Yin ◽  
Wang Xiao Feng ◽  
Zhang Qing
Keyword(s):  
Strike Slip ◽  
Fault System ◽  
Altyn Tagh Fault ◽  
The North ◽  
Altyn Tagh

The moderate size 2019 September Mw 5.8 Silivri earthquake unveils the complexity of the Main Marmara Fault shear zone

2020 ◽  
Vol 224 (1) ◽  
pp. 377-388 ◽  
Author(s):  
Hayrullah Karabulut ◽  
Sezim Ezgi Güvercin ◽  
Figen Eskiköy ◽  
Ali Özgun Konca ◽  
Semih Ergintav
Keyword(s):  
Shear Zone ◽  
Sedimentary Cover ◽  
Marmara Sea ◽  
Depth Range ◽  
Stress Increase ◽  
The North ◽  
Finite Fault ◽  
Stress Changes ◽  
The City ◽  
The Town

SUMMARY The unbroken section of the North Anatolian Fault beneath the Sea of Marmara is a major source of seismic hazard for the city of İstanbul. The northern and currently the most active branch, the Main Marmara Fault (MMF), is segmented within a shear zone and exhibits both partially creeping and locked behaviour along its 150 km length. In 2019 September, a seismic activity initiated near MMF, off-coast the town of Silivri, generating 14 earthquakes ≥ Mw 3.5 in a week. The Mw 5.8 Silivri earthquake, is the largest in the Marmara Sea since the 1963 Mw 6.3 Çınarcık earthquake. Our analyses reveal that the activity started in a narrow zone (∼100 m) and spread to ∼7 km following an Mw 4.7 foreshock within ∼2 d. The distribution of relocated aftershocks and the focal mechanisms computed from regional waveforms reveal that the Mw 5.8 earthquake did not occur on the MMF, but it ruptured ∼60° north-dipping oblique strike-slip fault with significant thrust component located on the north of the MMF. Finite-fault slip model of the main shock shows 8 km long rupture with directivity toward east, where the ruptured fault merges to the MMF. The narrow depth range of the slip distribution (10–13 km) and the aftershock zone imply that the causative fault is below the deep sedimentary cover of the Marmara Basin. The distribution of aftershocks of the Mw 5.8 event is consistent with Coulomb stress increase. The stress changes along MMF include zones of both stress decrease due to clamping and right-lateral slip, and stress increase due to loading.

Disintegration, Faulting and Seismogenesis of the North China Craton

1988 ◽  
Vol 59 (4) ◽  
pp. 247-250
Author(s):  
Ding Guoyu
Keyword(s):  
North China Craton ◽  
North China ◽  
Strike Slip ◽  
Normal Faulting ◽  
Strong Earthquakes ◽  
The Past ◽  
The North ◽  
Tectonic Framework ◽  
Yanshan Movement ◽  
High Seismicity

Abstract The North China Craton (NCC) began to disintegrate completely in the Yanshan Movement period (Jurassic-Cretaceous) forming a great number of NE, NEN, NW and WNW trending faults. Such fault systems have played an important role in the development of tectonics and seismicity in the Craton area. There has been a big change of stress field since the Pliocene, from predominantly normal faulting to predominantly strike-slip faulting. The NCC is an area with high seismicity. The recent seismicity is obviously controlled by the tectonic framework derived from Craton disintegration. Six strong earthquakes with M > 8.0 in this area have occurred in the past two thousand years. Many strong earthquakes in the NCC area are mainly caused by preexisting faults that move horizontally forming pull-apart basins.

scholarly journals Coseismic Ground Displacement after the Mw6.2 Earthquake in NW Croatia Determined from Sentinel-1 and GNSS CORS Data

Geosciences ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 170
Author(s):  
Olga Bjelotomić Oršulić ◽  
Danko Markovinović ◽  
Matej Varga ◽  
Tomislav Bašić
Keyword(s):  
Pannonian Basin ◽  
Strike Slip ◽  
Sar Interferometry ◽  
Fault System ◽  
Seismic Zone ◽  
Ground Displacement ◽  
Radar Images ◽  
The North ◽  
Satellite Radar ◽  
Gnss Data

At the very end of the year 2020, on 29 December, a hazardous earthquake of Mw = 6.2 hit the area of Petrinja and its surroundings, in the NW of Croatia. The earthquake was felt across the area of 400 km, leaving an inconceivable damage in the vicinity of the epicenter, devastated towns and ruined lives. In order to map the spreading of earthquake waves and to determine the coseismic ground displacement after the mainshock, we have analyzed open satellite radar images of Sentinel-1 and the GNSS data from the nearest CORS station related to the epicenter, along with the seismic faults. In this paper, we addressed and mapped the displacement linear surface ruptures detected by the SAR interferometry. The results show the vertical ground displacement to the extent of −12 cm in the southern area and up to 22 cm in the north-western part of a wide area struck by the earthquake impact, related to the epicenter. Subsidence and uplift in a range of ±5 cm over a wider affected area indicate a spatial extent and hazardous impact made by the earthquake. The ground displacement of 30 cm to the West and 40 cm to the East has been identified considering the intersection of Pokupsko and Petrinja strike-slip fault system in the seismic zone of Pannonian basin. Accordingly, we obtained matching results of 5 cm south-easting shift and −3 cm subsidence on Sisak GNSS CROPOS station, addressing the tectonic blocks movement along the activated complex fault system. The results compared with the geology data confirm the existence of two main faults; the Pokupsko and the Petrinja strike-slip faults and interpret the occurrence of secondary post-seismic events over the observed area.

Sign in / Sign up

Export Citation Format

Share Document