scholarly journals Vibration of FG Shell Rested on Winkler Foundation

Author(s):  
Abdellatif Selmi

Abstract Love’s first a pproximation theory is employed with the combination of Winkler term for the vibration of functionally graded cylindrical shell. MATLAB software is utilized for the vibration of functionally graded cylindrical shell with elastic foundation of Winkler and t he results are verified with the open literature. For isotropic materials, the physical properties are same everywhere where the laminated and functionally graded materials, they vary from point to point. Here the shell material has been taken as functiona lly graded material. The influence of the elastic foundation, wave number, length - and height - to - radius ratios is investigated with different boundary conditions. The frequencies of length - to - radius and height - to - radius ratio are counter part of each other . The frequency first increases and gain maximum value in the midway of the shell length and then lowers down for the variations of wave number. It is found that due to inducting the elastic foundation of Winkler, the frequencies increases.

2013 ◽  
Vol 690-693 ◽  
pp. 3046-3049
Author(s):  
Yan Bing Zhang ◽  
Chun Yu Ren ◽  
Xi Zhu

In this paper, we establish the finite element (FEM) and boundary element (BEM) models of a submarine section, and study the underwater sound radiation field of three different non-pressure shells made of steel, steel with anechoic tile, and the functionally graded materials (FGM) separately using a method combining of FEM and BEM . Research shows that the combination of FEM and BEM can address the acoustic radiation calculation problem of FGM, and in comparison with steel and anechoic tile laying submarine section, the weight of FGM non-pressure shell reduces 1600kg, and the sound radiation power decreases 4db and 2.5db respectively, thus having better performance in vibration and noise reduction.


Author(s):  
Muzamal Hussain ◽  
Muhammad Nawaz Naeem ◽  
Mohammad Reza Isvandzibaei

In this paper, vibration characteristics of rotating functionally graded cylindrical shell resting on Winkler and Pasternak elastic foundations have been investigated. These shells are fabricated from functionally graded materials. Shell dynamical equations are derived by using the Hamilton variational principle and the Langrangian functional framed from the shell strain and kinetic energy expressions. Elastic foundations, namely Winkler and Pasternak moduli are inducted in the tangential direction of the shell. The rotational motions of the shells are due to the Coriolis and centrifugal acceleration as well as the hoop tension produced in the rotating case. The wave propagation approach in standard eigenvalue form has been employed in order to derive the characteristic frequency equation describing the natural frequencies of vibration in rotating functionally graded cylindrical shell. The complex exponential functions, with the axial modal numbers that depend on the boundary conditions stated at edges of a cylindrical shell, have been used to compute the axial modal dependence. In our new investigation, frequency spectra are obtained for circumferential wave number, length-to-radius ratio, height-to-radius ratio with simply supported–simply supported and clamped–clamped boundary conditions without elastic foundation. Also, the effect of elastic foundation on the rotating cylindrical shells is examined with the simply supported–simply supported edge. To check the validity of the present method, the fundamental natural frequencies of non-rotating isotropic and functionally graded cylindrical shells are compared with the open literature. Also, a comparison is made for infinitely long rotating with the earlier published paper.


Author(s):  
R Akbari Alashti ◽  
M Khorsand ◽  
M H Tarahhomi

Asymmetric thermo-elastic analysis of a long cylindrical shell made of functionally graded material under the effect of thermo-mechanical loadings is carried out. Material properties of the cylindrical shell are assumed to be graded in the radial direction according to a power law function, while the Poisson's ratio is assumed to be constant. Numerical solutions of displacement, stress, and temperature fields are obtained using the Fourier and polynomial differential quadrature methods. The results are compared with the reported analytical solutions which are found to be in very good agreement. The cylindrical shell is considered to be under the effect of both axisymmetric and asymmetric loading conditions. Effects of grading parameter, temperature difference, and the ratio of the outer to inner radii of the cylindrical shell on stresses, displacement, and temperature fields are presented.


2013 ◽  
Vol 353-356 ◽  
pp. 3236-3242
Author(s):  
Ze Qing Wan ◽  
Shi Rong Li

Based on the Loves shell theory, relationship between bending solutions of functionally graded materials (FGM) and homogenous circular cylindrical shells was studied. By comparing the displacement-type governing equations for axially symmetrically bending of FGM and homogenous circular cylindrical shells, an analogous transform relation between the deflections of FGM circular cylindrical shell and those of homogenous one was obtained. By giving the material properties of FGM circular cylindrical shell changing as continuous functions in the thickness direction, the corresponding transition factor between the solutions of the two kind circular cylindrical shells were derived, which reflect the non-uniform properties of the functionally graded material circular cylindrical shell. Numerical example shows that the numerical solutions of the maximum of non-dimensional deflections are almost in agreement with the transformational solutions whennequals approximately 5, wherenis the volume fraction index. As a result, solutions for axially symmetrically bending of a non-homogenous circular cylindrical shell can be reduced to that of a homogenous one and the calculation of the transformation factors.


2003 ◽  
Vol 70 (3) ◽  
pp. 359-363 ◽  
Author(s):  
S. Mukherjee ◽  
Glaucio H. Paulino

Paulino and Jin [Paulino, G. H., and Jin, Z.-H., 2001, “Correspondence Principle in Viscoelastic Functionally Graded Materials,” ASME J. Appl. Mech., 68, pp. 129–132], have recently shown that the viscoelastic correspondence principle remains valid for a linearly isotropic viscoelastic functionally graded material with separable relaxation (or creep) functions in space and time. This paper revisits this issue by addressing some subtle points regarding this result and examines the reasons behind the success or failure of the correspondence principle for viscoelastic functionally graded materials. For the inseparable class of nonhomogeneous materials, the correspondence principle fails because of an inconsistency between the replacements of the moduli and of their derivatives. A simple but informative one-dimensional example, involving an exponentially graded material, is used to further clarify these reasons.


2008 ◽  
Vol 587-588 ◽  
pp. 400-404
Author(s):  
P. Pinto ◽  
L. Mazare ◽  
Delfim Soares ◽  
F.S. Silva

The Incremental Melting and Solidification Process (IMSP) is a relatively new field for material processing for the production of functionally graded materials. In this process a controlled liquid bath is maintained at the top of the component where new materials are added changing the components composition. Thus, a functionally graded material is obtained with a varying composition along one direction of the component. This paper deals with the influence of one of the process parameters, namely displacement rates between heating coil and mould, in order to evaluate its influence on both metallurgical and mechanical properties of different Al-Si alloys. Hardness and phase distribution, along the main castings axis, were measured. To better assess and characterize the process, two different Al-Si alloys with and without variation of chemical composition along the specimen were analysed. Results demonstrate that a gradual variation of metallurgical and mechanical properties along the component is obtained. It is also shown that Al-Si functionally graded materials can be produced by the incremental melting and solidification process. Results show that the displacement rate is very important on metallurgical and mechanical properties of the obtained alloy.


2017 ◽  
Vol 24 (17) ◽  
pp. 3809-3818 ◽  
Author(s):  
Farzad Ebrahimi ◽  
Mohammad Reza Barati ◽  
Parisa Haghi

The present research deals with the wave dispersion behavior of a rotating functionally graded material (FGMs) nanobeam applying nonlocal elasticity theory of Eringen. Material properties of rotating FG nanobeam are spatially graded according to a power-law model. The governing equations as functions of axial force due to centrifugal stiffening and displacements are obtained by employing Hamilton’s principle based on the Euler–Bernoulli beam theory. By using an analytical model, the dispersion relations of the FG nanobeam are derived by solving an eigenvalue problem. Numerical results clearly show that various parameters, such as angular velocity, gradient index, wave number and nonlocal parameter, are significantly effective to characteristics of wave propagations of rotating FG nanobeams. The results can be useful for next generation study and design of nanomachines, such as nanoturbines, nanoscale molecular bearings and nanogears, etc.


Author(s):  
С. И. Жаворонок ◽  

A brief review of the modern state-of-the art and tendencies of further development of various methods of solution of wave dispersion problems in heterogeneous functionally graded elastic waveguides is presented. Main types of functionally graded materials and structures, including gradient thon-walled structures, and their main engineering applications is discussed. The main difficulties of modelling of the stress-strain state of functionally graded shells and plates are pointed, as well as the possible ways to overcome such difficulties. The main theoretical bases of definition of effective constitutive constants of functionally graded materials and their possible estimates used in the practice are considered. Main dependencies of the effective constitutive constants of a functionally graded material on coordinates used for the mathematical modelling of the dynamics are also shown. The statement of the dynamics problem for a functionally graded waveguide and the appropriate statement of the normal wave dispersion problem are pointed. The presented Part I of the review consider some analytical methods of solution of dispersion problems, mainly the matrix ones based on the formulation of the steady dynamics problem in the image space as a first-order ordinary differential equations system. The state vectors corresponding to the useful Cauchy and Stroh formalisms are introduced, and the appropriate governing equations and the boundary conditions on waveguide’s faces are presented. Classical methods for solving the steady dynamics problem for a laminated waveguide are briefly described, which could be a basis for the further approximation of a functionally graded material by a system of layers with constant properties, i.e. the transfer matrix method, its main modifications developed to ensure the stability of calculations, and the global matrix method. Then, the intensively developed last 15 years reverberation matrix method, stiffness matrix method, and the Peano series method are discussed. Some key solutions of the wave dispersion problems for heterogeneous layers are presented; such solutions improve the efficiency of approximation of a functionally graded structure by a laminated one. The implicit solution of the general problem of steady dynamics for a waveguide with arbitrary gradation law is shown. The key features of the discussed matrix methods are pointed briefly as well as their main drawbacks. In the Part II, the main attention will be paid to methods of semi-analytical solution of dispersion problems based on the approximation of a waveguide by an equivalent system with a finite number of degrees of freedom: power series, generalized Fourier series, semi-analytical finite elements. spectral elements, as well as methods based on various theories of plates and shells.


2021 ◽  
Vol 118 (5) ◽  
pp. 502
Author(s):  
Jiarong Zhang ◽  
Xinjie Di ◽  
Chengning Li ◽  
Xipeng Zhao ◽  
Lingzhi Ba ◽  
...  

Functional graded materials (FGMs) have been widely applied in many engineering fields, and are very potential to be the substitutions of dissimilar metal welding joints due to their overall performance. In this work, the Inconel625-high-strength low-alloy (HSLA) Steel FGM was fabricated by wire arc additive manufacturing (WAAM). The chemical composition distribution, microstructure, phase evolution and mechanical properties of the FGM were examined. With the increasing of HSLA Steel, the chemical composition appeared graded distribution, and the primary dendrite spacing was largest in graded region with 20%HSLA Steel and then gradually decreased. And the main microstructure of the FGM transformed from columnar dendrites to equiaxed dendrites. Laves phase precipitated along dendrites boundary when the content of HSLA Steel was lower than 70% and Nb-rich carbides precipitated when the content of HSLA Steel exceeded to 70%. Microhardness and tensile strength gradually decreased with ascending content of HSLA Steel, and had a drastic improvement (159HV to 228HV and 355Mpa to 733Mpa) when proportion of HSLA Steel increased from 70% to 80%.


Sign in / Sign up

Export Citation Format

Share Document