scholarly journals A New Objective Evaluation Method on Image Edge Detection

2021 ◽  
Author(s):  
Jingshi Chen ◽  
Gang Liu ◽  
Feng Liu ◽  
Ying Wang ◽  
Yongxing Sun ◽  
...  
Keyword(s):  
Edge Detection ◽  
Evaluation System ◽  
Evaluation Method ◽  
Subjective Evaluation ◽  
Evaluation Criteria ◽  
Objective Evaluation ◽  
Evaluation Indexes ◽  
Image Edge Detection ◽  
Image Edge ◽  
Basic Evaluation

Abstract In the field of machine vision, image edge detection is an important technology, which can make necessary preparation for the later image processing. Consequently, accurate evaluation of the edge detection effect of the processed image is a more critical technology. In this paper, the new three criteria are proposed, which is based on Canny's three criteria for edge detection. Through theoretical analysis, three quantitative basic evaluation indexes are given to the new three criteria, namely SSIM index of image reconstruction similarity, BIdx index of edge reliability and CIdx index of edge continuity. Additionally, noise evaluation criteria is also considered. Then the four basic evaluation indexes are fused to get the objective evaluation index EIdx of image edge detection.Finally, the experimental data show that the accuracy of the method is better than that of the subjective evaluation system.

A subjective-objective evaluation method of hole surface quality in drilling CFRP-Ti stacks

2020 ◽  
pp. 095440542097107
Author(s):  
Shunuan Liu ◽  
Ning Wang ◽  
Kaifu Zhang ◽  
Bin Luo
Keyword(s):  
Surface Quality ◽  
Evaluation System ◽  
Evaluation Method ◽  
Evaluation Model ◽  
Subjective Evaluation ◽  
Objective Evaluation ◽  
Entropy Weight ◽  
Evaluation Indexes ◽  
Reinforced Plastics

Hole surface quality in drilling carbon fiber-reinforced plastics and titanium alloy (CFRP-Ti) stacks is a key factor affecting high-quality assembly and reliable usage of the structure so it need be reasonably evaluated. However, there is no standardized evaluation system of hole surface quality in drilling CFRP-Ti stacks. The existing evaluation indexes cannot meet the evaluation requirements on the surface quality of the hole. This paper proposes a subjective-objective evaluation method to evaluate the surface quality of the hole in drilling CFRP-Ti stacks. Firstly, the evaluation factors are determined by experiments, including CFRP delamination, CFRP hole entrance tears, surface roughness of CFRP and Ti, and the evaluation system is established according to defect characteristics and industry standards. Secondly, the subjective evaluation model is established based on the improved analytic hierarchy process, the objective evaluation model is established based on the entropy weight method and the subjective and objective combination weight calculation method is obtained based on the principle of minimum discriminant information. Finally, the surface quality of the hole is evaluated by subjective, objective, subjective-objective evaluation methods respectively. The result shows that subjective-objective evaluation method is more reasonable and effective.

scholarly journals Subjective Product Evaluation System Based on Kansei Engineering and Analytic Hierarchy Process

Symmetry ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1340 ◽  
Author(s):  
Yaxue Zuo ◽  
Zhenya Wang
Keyword(s):  
Evaluation System ◽  
Comprehensive Evaluation ◽  
Subjective Evaluation ◽  
Reliability And Validity ◽  
Objective Evaluation ◽  
Product Evaluation ◽  
Kansei Engineering ◽  
Analytic Hierarchy ◽  
Evaluation Indexes ◽  
Hierarchy Process

Product evaluation is very important for product improvement and development, and subjective product evaluation determines customer’s evaluation of products to some extent, so the purpose of this study is to establish a reasonable subjective product evaluation system. In this study, we comprehensively determine the evaluation indexes based on Kansei engineering (KE), establish an overall product evaluation system by using analytic hierarchy process (AHP), and establish the subjective product evaluation system by classifying the evaluation indexes in the overall product evaluation system into “objective evaluation index” and “subjective evaluation index”, removing the objective evaluation indexes, and retaining the subjective evaluation indexes. Additionally, we select some modern chairs as experimental samples to verify the reliability and validity of this subjective product evaluation system by means of questionnaires. The experimental results show that, in this subjective product evaluation system, the subjective evaluation of the product is positively correlated with the “favorite” level of the product in comprehensive evaluation, and negatively correlated with the “least favorite” level of the product in comprehensive evaluation, indicating that this subjective product evaluation system realizes a symmetry between subjective product evaluation and comprehensive product evaluation. Therefore, it can be concluded that this subjective product evaluation system based on KE and AHP proposed in this study has reliability and validity, and can be used for product evaluation to judge the popularity of products and enhance the competitiveness of products.

scholarly journals An Evaluation Method of Mode Switching Quality for Double-Belt Continuously Variable Transmission

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Lanchun Zhang ◽  
Zhongwei Zhu ◽  
Bin Huang ◽  
Tianbo Wang
Keyword(s):  
Evaluation Method ◽  
Evaluation Model ◽  
Subjective Evaluation ◽  
Objective Evaluation ◽  
Transmission Efficiency ◽  
Continuously Variable Transmission ◽  
Mode Switching ◽  
Evaluation Indexes ◽  
Variable Transmission ◽  
Driver’S Intention

In order to improve the transmission efficiency and carrying capacity of conventional single-belt continuously variable transmission (CVT), one new type of dual-belt CVT is proposed in this paper. Under the situation that this new dual-belt CVT should be switched between single- and dual-belt modes frequently according to driver’s intention and road conditions, so five objective evaluation indexes of mode switching quality for the dual-belt CVT are proposed, considering the aspects of vehicle power, comfort, and transmission durability comprehensively. Then, the objective evaluation model of mode switching quality is established by the BP neural network optimized by the genetic algorithm. It is found that the prediction results are consistent with the subjective evaluation. After analyzing the influence of the selected five evaluation indexes on the prediction results, it is obvious that these five evaluation indexes of mode switching quality for dual-belt CVT are reasonable.

scholarly journals Enhancing Ant-Based Algorithms for Medical Image Edge Detection by Admissible Perturbations of Demicontractive Mappings

Symmetry ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 885
Author(s):  
Vasile Berinde ◽  
Cristina Ţicală
Keyword(s):  
Edge Detection ◽  
Medical Image ◽  
Test Functions ◽  
Head Ct ◽  
X Ray ◽  
Numerical Tests ◽  
Image Edge Detection ◽  
Evaluation Of Parameters ◽  
Image Edge ◽  
Demicontractive Mappings

The aim of this paper is to show analytically and empirically how ant-based algorithms for medical image edge detection can be enhanced by using an admissible perturbation of demicontractive operators. We thus complement the results reported in a recent paper by the second author and her collaborators, where they used admissible perturbations of demicontractive mappings as test functions. To illustrate this fact, we first consider some typical properties of demicontractive mappings and of their admissible perturbations and then present some appropriate numerical tests to illustrate the improvement brought by the admissible perturbations of demicontractive mappings when they are taken as test functions in ant-based algorithms for medical image edge detection. The edge detection process reported in our study considers both symmetric (Head CT and Brain CT) and asymmetric (Hand X-ray) medical images. The performance of the algorithm was tested visually with various images and empirically with evaluation of parameters.

Sign in / Sign up

Export Citation Format

Share Document