scholarly journals sc-REnF: An Entropy Guided Robust Feature Selection for Single-Cell RNA-seq Data

2021 ◽  
Author(s):  
Snehalika Lall ◽  
Abhik Ghosh ◽  
Sumanta Ray ◽  
Sanghamitra Bandyopadhyay
Keyword(s):  
Single Cell ◽  
Gene Selection ◽  
Small Sample ◽  
Rna Seq ◽  
Homogeneous Grouping ◽  
Cell Clustering ◽  
Selection For ◽  
Downstream Analysis ◽  
Cell Data

Abstract Annotation of cells in single-cell clustering requires a homogeneous grouping of cell populations. Since single cell data is susceptible to technical noise, the quality of genes selected prior to clustering is of crucial importance in the preliminary steps of downstream analysis. Therefore, interest in robust gene selection has gained considerable attention in recent years. We introduce sc-REnF, (robust entropy based feature (gene) selection method), aiming to leverage the advantages of Rényi and Tsallis> entropies in gene selection for single cell clustering. Experiments demonstrate that with tuned parameter (q), Rényi and Tsallis entropies select genes that improved the clustering results significantly, over the other competing methods. sc-REnF can capture relevancy and redundancy among the features of noisy data extremely well due to its robust objective function. Moreover, the selected features/genes can able to clusters the unknown cells with a high accuracy. Finally, sc-REnF yields good clustering performance in small sample, large feature scRNA-seq data.

scholarly journals sc-REnF:An entropy guided robust feature selection for clustering of single-cell rna-seq data

2020 ◽  
Author(s):  
Snehalika Lall ◽  
Abhik Ghosh ◽  
Sumanta Ray ◽  
Sanghamitra Bandyopadhyay
Keyword(s):  
Single Cell ◽  
Gene Selection ◽  
Rna Seq ◽  
Technical Noise ◽  
Marker Selection ◽  
Cell Clustering ◽  
Typing Methods ◽  
Original Application ◽  
Downstream Analysis ◽  
Cell Typing

ABSTRACTMany single-cell typing methods require pure clustering of cells, which is susceptible towards the technical noise, and heavily dependent on high quality informative genes selected in the preliminary steps of downstream analysis. Techniques for gene selection in single-cell RNA sequencing (scRNA-seq) data are seemingly simple which casts problems with respect to the resolution of (sub-)types detection, marker selection and ultimately impacts towards cell annotation. We introduce sc-REnF, a novel and robust entropy based feature (gene) selection method, which leverages the landmark advantage of ‘Renyi’ and ‘Tsallis’ entropy achieved in their original application, in single cell clustering. Thereby, gene selection is robust and less sensitive towards the technical noise present in the data, producing a pure clustering of cells, beyond classifying independent and unknown sample with utmost accuracy. The corresponding software is available at: https://github.com/Snehalikalall/sc-REnF

scholarly journals RgCop-A regularized copula based method for gene selection in single cell rna-seq data

2021 ◽  
Vol 17 (10) ◽  
pp. e1009464
Author(s):  
Snehalika Lall ◽  
Sumanta Ray ◽  
Sanghamitra Bandyopadhyay
Keyword(s):  
Single Cell ◽  
Gene Selection ◽  
Real Life ◽  
Classification Performance ◽  
Rna Seq ◽  
Scale Invariant ◽  
Dependence Measure ◽  
Highly Expressed Genes ◽  
The Stability ◽  
Downstream Analysis

Gene selection in unannotated large single cell RNA sequencing (scRNA-seq) data is important and crucial step in the preliminary step of downstream analysis. The existing approaches are primarily based on high variation (highly variable genes) or significant high expression (highly expressed genes) failed to provide stable and predictive feature set due to technical noise present in the data. Here, we propose RgCop, a novel regularized copula based method for gene selection from large single cell RNA-seq data. RgCop utilizes copula correlation (Ccor), a robust equitable dependence measure that captures multivariate dependency among a set of genes in single cell expression data. We raise an objective function by adding a l1 regularization term with Ccor to penalizes the redundant co-efficient of features/genes, resulting non-redundant effective features/genes set. Results show a significant improvement in the clustering/classification performance of real life scRNA-seq data over the other state-of-the-art. RgCop performs extremely well in capturing dependence among the features of noisy data due to the scale invariant property of copula, thereby improving the stability of the method. Moreover, the differentially expressed (DE) genes identified from the clusters of scRNA-seq data are found to provide an accurate annotation of cells. Finally, the features/genes obtained from RgCop can able to annotate the unknown cells with high accuracy.

scholarly journals LSH-GAN: in-silico generation of cells for small sample high dimensional scRNA-seq data

2021 ◽  
Author(s):  
Snehalika Lall ◽  
Sumanta Ray ◽  
Sanghamitra Bandyopadhyay
Keyword(s):  
Gene Selection ◽  
Fundamental Problem ◽  
Small Sample ◽  
Locality Sensitive Hashing ◽  
Training Procedure ◽  
Generative Adversarial Network ◽  
Adversarial Network ◽  
Cell Clustering ◽  
Standard Procedures ◽  
Downstream Analysis

Abstract A fundamental problem of downstream analysis of scRNA-seq data is the unavailability of enough cell samples compare to the feature size. This is mostly due to the budgetary constraint of single cell experiments or simply because of the small number of available patient samples. Here, we present an improved version of generative adversarial network (GAN) called LSH-GAN to address this issue by producing new realistic cell samples. We update the training procedure of the generator of GAN using locality sensitive hashing which speeds up the sample generation, thus maintains the feasibility of applying the standard procedures of downstream analysis. LSH-GAN outperforms the benchmarks for realistic generation of quality cell samples. Experimental results show that generated samples of LSH-GAN improves the performance of the downstream analysis such as feature (gene) selection and cell clustering.

scholarly journals scater: pre-processing, quality control, normalisation and visualisation of single-cell RNA-seq data in R

2016 ◽  
Author(s):  
Davis J. McCarthy ◽  
Kieran R. Campbell ◽  
Aaron T. L. Lun ◽  
Quin F. Wills
Keyword(s):  
Quality Control ◽  
Single Cell ◽  
Sequence Data ◽  
Supplementary Information ◽  
Processing Quality ◽  
Rna Seq ◽  
Study Gene Expression ◽  
Supplementary Material ◽  
Downstream Analysis ◽  
Cell Data

AbstractMotivationSingle-cell RNA sequencing (scRNA-seq) is increasingly used to study gene expression at the level of individual cells. However, preparing raw sequence data for further analysis is not a straightforward process. Biases, artifacts, and other sources of unwanted variation are present in the data, requiring substantial time and effort to be spent on pre-processing, quality control (QC) and normalisation.ResultsWe have developed the R/Bioconductor package scater to facilitate rigorous pre-processing, quality control, normalisation and visualisation of scRNA-seq data. The package provides a convenient, flexible workflow to process raw sequencing reads into a high-quality expression dataset ready for downstream analysis. scater provides a rich suite of plotting tools for single-cell data and a flexible data structure that is compatible with existing tools and can be used as infrastructure for future software development.AvailabilityThe open-source code, along with installation instructions, vignettes and case studies, is available through Bioconductor at http://bioconductor.org/packages/scater.Supplementary informationSupplementary material is available online at bioRxiv accompanying this manuscript, and all materials required to reproduce the results presented in this paper are available at dx.doi.org/10.5281/zenodo.60139.

scholarly journals FastProject: A Tool for Low-Dimensional Analysis of Single-Cell RNA-Seq Data

2016 ◽  
Author(s):  
David DeTomaso ◽  
Nir Yosef
Keyword(s):  
Single Cell ◽  
Gene Selection ◽  
Phenotypic Diversity ◽  
Biological Significance ◽  
Projection Methods ◽  
Two Dimensional ◽  
Rna Seq ◽  
Modular Architecture ◽  
Low Dimensional ◽  
Cell Data

Background: A key challenge in the emerging field of single-cell RNA-Seq is to characterize phenotypic diversity between cells and visualize this information in an informative manner. A common technique when dealing with high-dimensional data is to project the data to 2 or 3 dimensions for visualization. However, there are a variety of methods to achieve this result and once projected, it can be difficult to ascribe biological significance to the observed features. Additionally, when analyzing single-cell data, the relationship between cells can be obscured by technical confounders such as variable gene capture rates. Results: To aid in the analysis and interpretation of single-cell RNA-Seq data, we have developed FastProject, a software tool which analyzes a gene expression matrix and produces a dynamic output report in which two-dimensional projections of the data can be explored. Annotated gene sets (referred to as gene 'signatures') are incorporated so that features in the projections can be understood in relation to the biological processes they might represent. FastProject provides a novel method of scoring each cell against a gene signature so as to minimize the effect of missed transcripts as well as a method to rank signature-projection pairings so that meaningful associations can be quickly identified. Additionally, FastProject is written with a modular architecture and designed to serve as a platform for incorporating and comparing new projection methods and gene selection algorithms. Conclusions: Here we present FastProject, a software package for two-dimensional visualization of single cell data, which utilizes a plethora of projection methods and provides a way to systematically investigate the biological relevance of these low dimensional representations by incorporating domain knowledge.

scholarly journals Single-Cell RNA-Seq of Mouse Dopaminergic Neurons Informs Candidate Gene Selection for Sporadic Parkinson Disease

2018 ◽  
Vol 102 (3) ◽  
pp. 427-446 ◽  
Author(s):  
Paul W. Hook ◽  
Sarah A. McClymont ◽  
Gabrielle H. Cannon ◽  
William D. Law ◽  
A. Jennifer Morton ◽  
...  
Keyword(s):  
Parkinson Disease ◽  
Candidate Gene ◽  
Single Cell ◽  
Dopaminergic Neurons ◽  
Gene Selection ◽  
Rna Seq ◽  
Selection For

scholarly journals Enhancing droplet-based single-nucleus RNA-seq resolution using the semi-supervised machine learning classifier DIEM

2019 ◽  
Author(s):  
Marcus Alvarez ◽  
Elior Rahmani ◽  
Brandon Jew ◽  
Kristina M. Garske ◽  
Zong Miao ◽  
...  
Keyword(s):  
Gene Expression ◽  
Single Cell ◽  
Cell Types ◽  
Supervised Machine Learning ◽  
Data Sets ◽  
Rna Seq ◽  
Novel Approach ◽  
Single Nucleus ◽  
Downstream Analysis

AbstractSingle-nucleus RNA sequencing (snRNA-seq) measures gene expression in individual nuclei instead of cells, allowing for unbiased cell type characterization in solid tissues. Contrary to single-cell RNA seq (scRNA-seq), we observe that snRNA-seq is commonly subject to contamination by high amounts of extranuclear background RNA, which can lead to identification of spurious cell types in downstream clustering analyses if overlooked. We present a novel approach to remove debris-contaminated droplets in snRNA-seq experiments, called Debris Identification using Expectation Maximization (DIEM). Our likelihood-based approach models the gene expression distribution of debris and cell types, which are estimated using EM. We evaluated DIEM using three snRNA-seq data sets: 1) human differentiating preadipocytes in vitro, 2) fresh mouse brain tissue, and 3) human frozen adipose tissue (AT) from six individuals. All three data sets showed various degrees of extranuclear RNA contamination. We observed that existing methods fail to account for contaminated droplets and led to spurious cell types. When compared to filtering using these state of the art methods, DIEM better removed droplets containing high levels of extranuclear RNA and led to higher quality clusters. Although DIEM was designed for snRNA-seq data, we also successfully applied DIEM to single-cell data. To conclude, our novel method DIEM removes debris-contaminated droplets from single-cell-based data fast and effectively, leading to cleaner downstream analysis. Our code is freely available for use at https://github.com/marcalva/diem.

scholarly journals EpiScanpy: integrated single-cell epigenomic analysis

2019 ◽  
Author(s):  
Anna Danese ◽  
Maria L. Richter ◽  
David S. Fischer ◽  
Fabian J. Theis ◽  
Maria Colomé-Tatché
Keyword(s):  
Dna Methylation ◽  
Single Cell ◽  
Large Scale ◽  
Feature Space ◽  
Rna Seq ◽  
Computational Framework ◽  
Learning Techniques ◽  
Multiple Feature ◽  
The Many ◽  
Cell Data

ABSTRACTEpigenetic single-cell measurements reveal a layer of regulatory information not accessible to single-cell transcriptomics, however single-cell-omics analysis tools mainly focus on gene expression data. To address this issue, we present epiScanpy, a computational framework for the analysis of single-cell DNA methylation and single-cell ATAC-seq data. EpiScanpy makes the many existing RNA-seq workflows from scanpy available to large-scale single-cell data from other -omics modalities. We introduce and compare multiple feature space constructions for epigenetic data and show the feasibility of common clustering, dimension reduction and trajectory learning techniques. We benchmark epiScanpy by interrogating different single-cell brain mouse atlases of DNA methylation, ATAC-seq and transcriptomics. We find that differentially methylated and differentially open markers between cell clusters enrich transcriptome-based cell type labels by orthogonal epigenetic information.

Sign in / Sign up

Export Citation Format

Share Document