scholarly journals Fully Automated Radiosynthesis of [18f]lbt999on Tracerlab Fxfn and Allinonemodules, A Pet Radiopharmaceutical for Imaging the Dopamine Transporter in Human Brain

2020 ◽  
Author(s):  
Christine Vala ◽  
Céline Mothes ◽  
Gabrielle Chicheri ◽  
Pauline Magadur ◽  
Gilles Viot ◽  
...  
Keyword(s):  
Dopamine Transporter ◽  
Industrial Production ◽  
Radiochemical Purity ◽  
Acid Methyl Ester ◽  
Molar Activity ◽  
Positron Emission ◽  
Single Use ◽  
Radiochemical Yields ◽  
Pet Radiopharmaceutical

Abstract Background:Fluorine labelled 8-((E)-4-fluoro-but-2-enyl)-3b-p-tolyl-8-aza-bicyclo[3.2.1]octane-2b-carboxylic acid methyl ester ([18F]LBT999) is a selective radioligand for in vivoneuroimaging and quantification of the dopamine transporter by Positron Emission Tomography (PET). [18F]LBT999 has been produced on a TRACERlabFXFN for the Phase I study but forPhase III and a potent industrial production transfer, production has been also implemented on AllinOne (AIO)system requiring single use cassette. Both productions methods are reported herein. Results:Automation of [18F]LBT999radiosynthesis on FXFN was carried out in 35% yield (decay-corrected) in 65 min (n=16), with a radiochemical purity higher than 99 %and a molar activity of 158GBq/µmol at the end of synthesis. The transfer on the AIO platform followed by optimizations allowed the production of [18F]LBT999 in 32.7% yield (decay-corrected) within 48 min (n=5), with a radiochemical purity better than 98% and a molar activity in average higher to 154 GBq/µmol at the end of synthesis. Quality controls of both methods met the specification for clinical application.Conclusion:Both modules allow efficient and reproducible radiosynthesis of [18F]LBT999 with good radiochemical yields and a reasonable synthesis time.The developments made on AIO as its ability to meet pharmaceutical criteria and to more easily comply with GMP requirements make this approach as the best for a potent industrial production of the [18F]LBT999 and a future wider use.

scholarly journals Fully automated radiosynthesis of [18F]LBT999 on TRACERlab FXFN and AllinOne modules, a PET radiopharmaceutical for imaging the dopamine transporter in human brain

2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Christine Vala ◽  
Céline Mothes ◽  
Gabrielle Chicheri ◽  
Pauline Magadur ◽  
Gilles Viot ◽  
...  
Keyword(s):  
Dopamine Transporter ◽  
Industrial Production ◽  
Radiochemical Purity ◽  
Acid Methyl Ester ◽  
Phase Iii ◽  
Synthesis Time ◽  
Molar Activity ◽  
Positron Emission ◽  
Optimal Approach

Abstract Background Fluorine labelled 8-((E)-4-fluoro-but-2-enyl)-3β-p-tolyl-8-aza-bicyclo[3.2.1]octane-2β-carboxylic acid methyl ester ([18F]LBT999) is a selective radioligand for the in vivo neuroimaging and quantification of the dopamine transporter by Positron Emission Tomography (PET). [18F]LBT999 was produced on a TRACERlab FXFN for the Phase I study but for Phase III and a potent industrial production transfer, production was also implemented on an AllinOne (AIO) system requiring a single use cassette. Both production methods are reported herein. Results Automation of [18F]LBT999 radiosynthesis on FXFN was carried out in 35% yield (decay-corrected) in 65 min (n = 16), with a radiochemical purity higher than 99% and a molar activity of 158 GBq/μmol at the end of synthesis. The transfer to the AIO platform followed by optimizations allowed the production of [18F]LBT999 in 32.7% yield (decay-corrected) within 48 min (n = 5), with a radiochemical purity better than 98% and a molar activity above 154 GBq/μmol on average at the end of synthesis. Quality controls of both methods met the specification for clinical application. Conclusion Both modules allow efficient and reproducible radiosynthesis of [18F]LBT999 with good radiochemical yields and a reasonable synthesis time. The developments made on AIO, such as its ability to meet pharmaceutical criteria and to more easily comply with GMP requirements, make it an optimal approach for the potent industrial production of [18F]LBT999 and future wider use.

scholarly journals Fully automated radiosynthesis of [18F]LBT999 on TRACERlab FXFN and AllinOne modules, a PET radiopharmaceutical for imaging the dopamine transporter in human brain

2020 ◽  
Author(s):  
Christine Vala ◽  
Céline Mothes ◽  
Gabrielle Chicheri ◽  
Pauline Magadur ◽  
Gilles Viot ◽  
...  
Keyword(s):  
Dopamine Transporter ◽  
Industrial Production ◽  
Radiochemical Purity ◽  
Acid Methyl Ester ◽  
Phase Iii ◽  
Synthesis Time ◽  
Molar Activity ◽  
Positron Emission ◽  
Optimal Approach

Abstract Background: Fluorine labelled 8-((E)-4-fluoro-but-2-enyl)-3b-p-tolyl-8-aza-bicyclo[3.2.1]octane-2b-carboxylic acid methyl ester ([18F]LBT999) is a selective radioligand for the in vivo neuroimaging and quantification of the dopamine transporter by Positron Emission Tomography (PET). [18F]LBT999 was produced on a TRACERlab FXFN for the Phase I study but for Phase III and a potent industrial production transfer, production was also implemented on an AllinOne (AIO) system requiring a single use cassette. Both production methods are reported herein. Results: Automation of [18F]LBT999 radiosynthesis on FXFN was carried out in 35% yield (decay-corrected) in 65 min (n=16), with a radiochemical purity higher than 99 % and a molar activity of 158 GBq/µmol at the end of synthesis. The transfer to the AIO platform followed by optimizations allowed the production of [18F]LBT999 in 32.7% yield (decay-corrected) within 48 min (n=5), with a radiochemical purity better than 98% and a molar activity above 154 GBq/µmol on average at the end of synthesis. Quality controls of both methods met the specification for clinical application.Conclusion: Both modules allow efficient and reproducible radiosynthesis of [18F]LBT999 with good radiochemical yields and a reasonable synthesis time. The developments made on AIO, such as its ability to meet pharmaceutical criteria and to more easily comply with GMP requirements, make it an optimal approach for the potent industrial production of [18F]LBT999 and future wider use.

scholarly journals Radiosynthesis of [11C]Ibrutinib via Pd-Mediated [11C]CO Carbonylation: Preliminary PET Imaging in Experimental Autoimmune Encephalomyelitis Mice

2021 ◽  
Vol 1 ◽  
Author(s):  
Anton Lindberg ◽  
Amanda J. Boyle ◽  
Junchao Tong ◽  
Michael B. Harkness ◽  
Armando Garcia ◽  
...  
Keyword(s):  
Experimental Autoimmune Encephalomyelitis ◽  
First Generation ◽  
Functional Group ◽  
Radiochemical Purity ◽  
Autoimmune Encephalomyelitis ◽  
Molar Activity ◽  
Positron Emission ◽  
Btk Inhibitor ◽  
Radiochemical Yields ◽  
Experimental Autoimmune

Ibrutinib is a first-generation Bruton's tyrosine kinase (BTK) inhibitor that has shown efficacy in autoimmune diseases and has consequently been developed as a positron emission tomography (PET) radiotracer. Herein, we report the automated radiosynthesis of [11C]ibrutinib through 11C-carbonylation of the acrylamide functional group, by reaction of the secondary amine precursor with [11C]CO, iodoethylene, and palladium–NiXantphos. [11C]Ibrutinib was reliably formulated in radiochemical yields of 5.4% ± 2.5% (non-decay corrected; n = 9, relative to starting [11C]CO2), radiochemical purity >99%, and molar activity of 58.8 ± 30.8 GBq/μmol (1.55 ± 0.83 Ci/μmol). Preliminary PET/magnetic resonance imaging with [11C]ibrutinib in experimental autoimmune encephalomyelitis (EAE) mice showed a 49% higher radioactivity accumulation in the spinal cord of mice with EAE scores of 2.5 vs. sham mice.

scholarly journals Radiosynthesis and Evaluation of Cyclohexyl (5-(2-[11C-Carbonyl]acetamidobenzo[d]thiazol-6-yl)-2-Methylpyridin-3-yl)Carbamate ([11C]PK68) As a New Radioligand For Imaging Receptor-Interacting Protein 1 Kinase

2022 ◽  
Author(s):  
Tomoteru Yamasaki ◽  
Katsushi Kumata ◽  
Atsuto Hiraishi ◽  
Yiding Zhang ◽  
Hidekatsu Wakizaka ◽  
...  
Keyword(s):  
Acetyl Chloride ◽  
Radiochemical Purity ◽  
Specific Binding ◽  
Small Animal ◽  
Small Animal Pet ◽  
Interacting Protein ◽  
Molar Activity ◽  
Positron Emission ◽  
Key Enzyme

Abstract Background: Receptor-interacting protein 1 kinase (RIPK1) is a key enzyme in the regulation of cellular necroptosis. Recently, cyclohexyl (5-(2-acetamidobenzo[d]thiazol-6-yl)-2-methylpyridin-3-yl)carbamate (PK68, 5) has been developed as a potent inhibitor of RIPK1. Herein, we radiosynthesized [11C]PK68 as a new positron emission tomography (PET) ligand for imaging RIPK1 and evaluated its potential in vivo.Results: We synthesized [11C]PK68 by reacting amine precursor 14 with [11C]acetyl chloride. At the end of synthesis, we obtained [11C]PK68 of 1200–1790 MBq (n = 10) with >99% radiochemical purity and a molar activity of 37–99 GBq/μmol starting from 18–33 GBq of [11C]CO2. The fully automated synthesis took 30 min from the end of irradiation. In a small-animal PET study, [11C]PK68 was rapidly distributed in the liver and kidneys of healthy mice after injection, and was subsequently cleared from their bodies via hepatobiliary excretion and the intestinal reuptake pathway. Although there was no obvious specific binding of RIPK1 in the PET study, [11C]PK68 demonstrated relatively high stability in vivo, and may be used as a lead compound for further candidate development.Conclusions: In the present study, we successfully radiosynthesized [11C]PK68 and evaluated its potential in vivo. We are planning to optimize the chemical structure of [11C]PK68 and conduct further PET studies on it using pathological models.

scholarly journals Microfluidic Radiosynthesis of the Muscarinic M2 Imaging Agent [18F]FP-TZTP

2018 ◽  
Vol 71 (10) ◽  
pp. 811 ◽  
Author(s):  
Lidia Matesic ◽  
Ivan Greguric ◽  
Giancarlo Pascali
Keyword(s):  
Radiochemical Purity ◽  
Muscarinic Acetylcholine Receptor ◽  
Reaction Times ◽  
Radiochemical Yield ◽  
Receptor Subtype ◽  
Chemical Reagents ◽  
Molar Activity ◽  
Positron Emission ◽  
Radiochemical Yields ◽  
Pet Scans

3-(4-(3-[18F]Fluoropropylthio)-1,2,5-thiadiazol-3-yl)-1-methyl-1,2,5,6-tetrahydropyridine ([18F]FP-TZTP) is a selective 18F-radiotracer for the muscarinic acetylcholine receptor subtype M2, which can be used to perform positron emission tomography (PET) scans on patients with neurological disorders such as Alzheimer’s disease. [18F]FP-TZTP was produced using continuous-flow microfluidics, a technique that uses reduced amounts of chemical reagents, shorter reaction times and in general, results in higher radiochemical yields compared to currently used techniques. The optimal 18F-radiolabelling conditions consisted of a total flow rate of 40 µL min−1 and 190°C, which produced [18F]FP-TZTP in 26 ± 10 % radiochemical yield with a molar activity of 182 ± 65 GBq µmol−1 and >99 % radiochemical purity.

scholarly journals Synthesis and Initial In Vivo Evaluation of [11C]AZ683—A Novel PET Radiotracer for Colony Stimulating Factor 1 Receptor (CSF1R)

2018 ◽  
Vol 11 (4) ◽  
pp. 136 ◽  
Author(s):  
Sean Tanzey ◽  
Xia Shao ◽  
Jenelle Stauff ◽  
Janna Arteaga ◽  
Phillip Sherman ◽  
...  
Keyword(s):  
Pet Imaging ◽  
Radiochemical Purity ◽  
Colony Stimulating Factor ◽  
In Vivo Evaluation ◽  
Molar Activity ◽  
Positron Emission ◽  
New Strategy ◽  
Activity Yield ◽  
Stimulating Factor

Positron emission tomography (PET) imaging of Colony Stimulating Factor 1 Receptor (CSF1R) is a new strategy for quantifying both neuroinflammation and inflammation in the periphery since CSF1R is expressed on microglia and macrophages. AZ683 has high affinity for CSF1R (Ki = 8 nM; IC50 = 6 nM) and >250-fold selectivity over 95 other kinases. In this paper, we report the radiosynthesis of [11C]AZ683 and initial evaluation of its use in CSF1R PET. [11C]AZ683 was synthesized by 11C-methylation of the desmethyl precursor with [11C]MeOTf in 3.0% non-corrected activity yield (based upon [11C]MeOTf), >99% radiochemical purity and high molar activity. Preliminary PET imaging with [11C]AZ683 revealed low brain uptake in rodents and nonhuman primates, suggesting that imaging neuroinflammation could be challenging but that the radiopharmaceutical could still be useful for peripheral imaging of inflammation.

scholarly journals Fully-automated production of [68Ga]Ga-FAPI-46 for clinical application

2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Sarah Spreckelmeyer ◽  
Matthias Balzer ◽  
Simon Poetzsch ◽  
Winfried Brenner
Keyword(s):  
Clinical Application ◽  
Radiochemical Purity ◽  
Clinical Settings ◽  
European Pharmacopoeia ◽  
Automated Production ◽  
In Vivo Detection ◽  
Positron Emission ◽  
Quality Control Parameters ◽  
Single Use

Abstract Background [68Ga]Ga-FAPI-46 is a promising radiopharmaceutical for in vivo detection of the fibroblast activation protein by positron emission tomography. Until now, the synthesis of [68Ga]Ga-FAPI-46 has been only performed manually. Our aim was to evaluate the automated synthesis of this radiopharmaceutical on two different commercially available synthesis modules in order to make the tracer readily available for clinical application. Results The synthesis of [68Ga]Ga-FAPI-46 with different amounts of precursor (10–50 μg) on the Modular Lab PharmTracer (MLPT) and Modular Lab eazy (ML eazy) from Eckert & Ziegler with a customized synthesis template and a customized single-use cassette yielded best results with 50 μg FAPI-46 for clinical multi-dose application. All relevant quality control parameters tested (e.g. sterility, stability and radiochemical purity) were in accordance with the European Pharmacopoeia. Conclusions [68Ga]Ga-FAPI-46 was successfully synthesized fully-automated on the synthesis modules Modular Lab PharmTracer and ML eazy and is, thus, available for multi-dose application in clinical settings.

Click Chemistry Expedited Radiosynthesis: Sulfur [18F]fluoride Exchange of Aryl Fluorosulfates

2019 ◽  
Author(s):  
Qinheng Zheng ◽  
Hongtao Xu ◽  
Hua Wang ◽  
Wen-Ge Han Du ◽  
Nan Wang ◽  
...  
Keyword(s):  
Click Chemistry ◽  
High Performance ◽  
Isotopic Exchange ◽  
Tumor Imaging ◽  
Radiochemical Yield ◽  
Exchange Method ◽  
Molar Activity ◽  
Positron Emission ◽  
Sulfur Fluoride

The lack of simple, efficient [<sup>18</sup>F]fluorination processes and new target-specific organofluorine probes remains the major challenge of fluorine-18-based positron emission tomography (PET). We report here a fast isotopic exchange method for the radiosynthesis of aryl [<sup>18</sup>F]fluorosulfate based PET agents enabled by the emerging sulfur fluoride exchange (SuFEx) click chemistry. The method has been applied to the fully-automated <sup>18</sup>F-radiolabeling of twenty-five structurally diverse aryl fluorosulfates with excellent radiochemical yield (83–100%) and high molar activity (up to 281 GBq µmol<sup>–1</sup>) at room temperature in 30 seconds. The purification of radiotracers requires no time-consuming high-performance liquid chromatography (HPLC), but rather a simple cartridge filtration. The utility of aryl [<sup>18</sup>F]fluorosulfate is demonstrated by the <i>in vivo</i> tumor imaging by targeting poly(ADP-ribose) polymerase 1 (PARP1).

scholarly journals Optimised GMP-compliant production of [18F]DPA-714 on the Trasis AllinOne module

2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Klaudia A. Cybulska ◽  
Vera Bloemers ◽  
Lars R. Perk ◽  
Peter Laverman
Keyword(s):  
Significant Degree ◽  
Translocator Protein ◽  
Positron Emission ◽  
Leaving Group ◽  
Inflammatory Processes ◽  
Single Production ◽  
Translocator Protein 18 Kda ◽  
Radiochemical Yields ◽  
Specific Ligand

Abstract Background The translocator protein 18 kDa is recognised as an important biomarker for neuroinflammation due to its soaring expression in microglia. This process is common for various neurological disorders. DPA-714 is a potent TSPO-specific ligand which found its use in Positron Emission Tomography following substitution of fluorine-19 with fluorine-18, a positron-emitting radionuclide. [18F]DPA-714 enables visualisation of inflammatory processes in vivo non-invasively. Radiolabelling of this tracer is well described in literature, including validation for clinical use. Here, we report significant enhancements to the process which resulted in the design of a fully GMP-compliant robust synthesis of [18F]DPA-714 on a popular cassette-based system, Trasis AllinOne, boosting reliability, throughput, and introducing a significant degree of simplicity. Results [18F]DPA-714 was synthesised using the classic nucleophilic aliphatic substitution on a good leaving group, tosylate, with [18F]fluoride using tetraethylammonium bicarbonate in acetonitrile at 100∘C. The process was fully automated on a Trasis AllinOne synthesiser using an in-house designed cassette and sequence. With a relatively small precursor load of 4 mg, [18F]DPA-714 was obtained with consistently high radiochemical yields of 55-71% (n=6) and molar activities of 117-350 GBq/µmol at end of synthesis. With a single production batch, starting with 31-42 GBq of [18F]fluoride, between 13-20 GBq of the tracer can be produced, enabling multi-centre studies. Conclusion To the best of our knowledge, the process presented herein is the most efficient [18F]DPA-714 synthesis, with advantageous GMP compliance. The use of a Trasis AllinOne synthesiser increases reliability and allows rapid training of production staff.

scholarly journals Simplified 89Zr-Labeling Protocol of Oxine (8-Hydroxyquinoline) Enabling Prolonged Tracking of Liposome-Based Nanomedicines and Cells

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1097
Author(s):  
Andras Polyak ◽  
Jens P. Bankstahl ◽  
Karen F. W. Besecke ◽  
Constantin Hozsa ◽  
Wiebke Triebert ◽  
...  
Keyword(s):  
Reaction Times ◽  
Extraction Methods ◽  
Cell Labeling ◽  
Size Exclusion ◽  
Cell Therapies ◽  
Biodistribution Studies ◽  
Positron Emission ◽  
Human Ipscs ◽  
Radiochemical Yields

In this work, a method for the preparation of the highly lipophilic labeling synthon [89Zr]Zr(oxinate)4 was optimized for the radiolabeling of liposomes and human induced pluripotent stem cells (hiPSCs). The aim was to establish a robust and reliable labeling protocol for enabling up to one week positron emission tomography (PET) tracing of lipid-based nanomedicines and transplanted or injected cells, respectively. [89Zr]Zr(oxinate)4 was prepared from oxine (8-hydroxyquinoline) and [89Zr]Zr(OH)2(C2O4). Earlier introduced liquid–liquid extraction methods were simplified by the optimization of buffering, pH, temperature and reaction times. For quality control, thin-layer chromatography (TLC), size-exclusion chromatography (SEC) and centrifugation were employed. Subsequently, the 89Zr-complex was incorporated into liposome formulations. PET/CT imaging of 89Zr-labeled liposomes was performed in healthy mice. Cell labeling was accomplished in PBS using suspensions of 3 × 106 hiPSCs, each. [89Zr]Zr(oxinate)4 was synthesized in very high radiochemical yields of 98.7% (96.8% ± 2.8%). Similarly, high internalization rates (≥90%) of [89Zr]Zr(oxinate)4 into liposomes were obtained over an 18 h incubation period. MicroPET and biodistribution studies confirmed the labeled nanocarriers’ in vivo stability. Human iPSCs incorporated the labeling agent within 30 min with ~50% efficiency. Prolonged PET imaging is an ideal tool in the development of lipid-based nanocarriers for drug delivery and cell therapies. To this end, a reliable and reproducible 89Zr radiolabeling method was developed and tested successfully in a model liposome system and in hiPSCs alike.

Sign in / Sign up

Export Citation Format

Share Document