scholarly journals Fluorine Depth Profiling Based on the 19F(p,p’g)19F Excitation Function

2021 ◽  
Author(s):  
Joao Cruz ◽  
M. Fonseca ◽  
D. Galaviz ◽  
A. Henriques ◽  
H. Luís ◽  
...  
Keyword(s):  
Excitation Function ◽  
Gamma Ray ◽  
Materials Science ◽  
Ion Beam ◽  
Depth Profiling ◽  
Fluorine Content ◽  
Emission Standard ◽  
Heterogeneous Samples ◽  
Beam Analysis

Abstract Ion beam analysis of fluorine has applications in research on teeth and bones, materials science, geochemistry and archaeometry. A novel PIGE (Particle Induced Gamma-ray Emission) standard free methodology for fluorine content determination for in-depth heterogeneous samples based on the excitation function of the 19F(p,p’γ)19F nuclear reaction is presented. New precise cross section measurements of this reaction in the proton energy range 2.1 to 4.1 MeV have been performed. In addition, the ERYA-Profiling code, a computer program specially developed for PIGE analysis of in-depth heterogeneous samples, employed this new excitation function in a case study where different fluorine simulated depth profiles probed the capability of insight into fluorine distributions in a given sample, showing the potential of PIGE analysis.

APPLICATIONS OF ION BEAM ANALYSIS TO THE ELEMENTAL AND ISOTOPIC CHARACTERISATION OF ADVANCED MATERIALS

2001 ◽  
Vol 15 (28n29) ◽  
pp. 1271-1280
Author(s):  
I. C. VICKRIDGE
Keyword(s):  
Materials Science ◽  
Condensed Matter ◽  
Ion Beam ◽  
Depth Profiling ◽  
Advanced Materials ◽  
Nuclear Reaction Analysis ◽  
Condensed Matter Physics ◽  
Ion Beam Analysis ◽  
Isotopic Tracing ◽  
Beam Analysis

The accelerator laboratory of the Groupe de Physique des Solides, Paris, has pioneered a number of IBA techniques and applications over the last few decades. In particular, in the 1960's and 1970's, Nuclear Reaction analysis (NRA) including nuclear resonance depth profiling, isotopic tracing combined with NRA, and channelling techniques were developed under the leadership of G. Amsel. In this paper I will present a selection of recent applications from this laboratory of NRA, isotopic tracing with stable isotopes, and ion channelling, intended to illustrate the present status of these techniques in condensed matter physics and materials science, and to act as a backdrop for a discussion of future directions for development of Ion Beam Analysis in condensed matter physics and advanced materials research.

scholarly journals A New High-Throughput Focused MeV Ion-Beam Analysis Setup

Instruments ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 10
Author(s):  
Sören Möller ◽  
Daniel Höschen ◽  
Sina Kurth ◽  
Gerwin Esser ◽  
Albert Hiller ◽  
...  
Keyword(s):  
Gamma Ray ◽  
Rutherford Backscattering Spectrometry ◽  
Ion Beam ◽  
Complete Analysis ◽  
Nuclear Reaction Analysis ◽  
Beam Optics ◽  
Single Measurement ◽  
Ion Beam Analysis ◽  
Beam Analysis ◽  
Technical Solutions

The analysis of material composition by ion-beam analysis (IBA) is becoming a standard method, similar to electron microscopy. A pool of IBA methods exists, from which the combination of particle-induced-X-ray emission (PIXE), particle induced gamma-ray analysis (PIGE), nuclear-reaction-analysis (NRA), and Rutherford-backscattering-spectrometry (RBS) provides the most complete analysis over the whole periodic table in a single measurement. Yet, for a highly resolved and accurate IBA analysis, a sophisticated technical setup is required integrating the detectors, beam optics, and sample arrangement. A new end-station developed and installed in Forschungszentrum Jülich provides these capabilities in combination with high sample throughput and result accuracy. Mechanical tolerances limit the device accuracy to 3% for RBS. Continuous pumping enables 5*10−8 mbar base pressure with vibration amplitudes < 0.1 µm. The beam optics achieves a demagnification of 24–34, suitable for µ-beam analysis. An in-vacuum manipulator enables scanning 50 × 50 mm² sample areas with 10 nm accuracy. The setup features the above-mentioned IBA detectors, enabling a broad range of analysis applications such as the operando analysis of batteries or the post-mortem analysis of plasma-exposed samples with up to 3000 discrete points per day. Custom apertures and energy resolutions down to 11 keV enable separation of Fe and Cr in RBS. This work presents the technical solutions together with the quantification of these challenges and their success in the form of a technical reference.

scholarly journals Ion Beam Analysis for the Investigation of Diffusion Processes

2020 ◽  
Vol 13 ◽  
pp. 51
Author(s):  
H.-W. Becker
Keyword(s):  
Diffusion Processes ◽  
Ion Beam ◽  
Depth Profiling ◽  
Depth Resolution ◽  
Ion Beam Analysis ◽  
Beam Analysis ◽  
Diffusion Studies ◽  
New Applications ◽  
Diffusion Of Hydrogen ◽  
High Depth

The unique advantages of ion beam analysis, such as the depth resolved unam- biguous stoichometric information of RBS or the possibility to detect hydrogen with high depth resolution still opens new applications in fundamental as well as applied science. Two examples are presented here.The diffusion of hydrogen in cement during the formation of cement has been studied with the 15N hydrogen depth profiling. It could be shown, that the known stages of the hydration process are correlated with the diffusion of hydrogen on a nanometer scale.Diffusion processes play also an important role in geology. The investigation of such processes with RBS will be presented. Prospects of diffusion studies using isotopie tracing with low lying resonances will be discussed.

Non-Destructive Fluorine Depth Profiling as Quality Assurance for the Oxidation Protection of TiAl Turbine Blades

2010 ◽  
Vol 638-642 ◽  
pp. 1384-1389 ◽  
Author(s):  
Sven Neve ◽  
Kurt Stiebing ◽  
Lothar P.H. Schmidt ◽  
Hans Eberhard Zschau ◽  
Patrick J. Masset ◽  
...  
Keyword(s):  
Quality Assurance ◽  
Ion Beam ◽  
Turbine Blades ◽  
Depth Profiling ◽  
Temperature Oxidation ◽  
Beam Analysis ◽  
Before And After ◽  
First Time ◽  
Non Destructive ◽  
Mass Increase

Using the halogen effect TiAl-alloys can be protected against high-temperature oxidation. Two different fluorination methods were applied to turbine blades. The mass increase due to oxidation can be drastically reduced compared to untreated specimen. A new vacuum chamber for ion beam analysis was developed to analyze the real parts. Using PIGE-technique the F-content as a function of depth before and after oxidation was detected. Thickness and composition of the oxide scale were measured by RBS. Both ion beam methods were non destructive and thus enabled for the first time quality assurance of the halogen treatment on real components.

scholarly journals Integrating Non-Destructive Ion Beam Analysis Methods and AMS Radiocarbon Dating for the Study of Ancient Bronze Statues

Radiocarbon ◽  
2012 ◽  
Vol 54 (3-4) ◽  
pp. 801-812 ◽  
Author(s):  
Gianluca Quarta ◽  
Lucio Calcagnile ◽  
Massimo Vidale
Keyword(s):  
Analytical Methods ◽  
Gamma Ray ◽  
Ion Beam ◽  
Compositional Analysis ◽  
Particle Accelerators ◽  
Accelerator Facility ◽  
Ion Beam Analysis ◽  
Ams Radiocarbon Dating ◽  
Beam Analysis ◽  
Wide Range

Analytical methods based on particle accelerators are widely used in cultural heritage diagnostics and archaeological sciences from the absolute dating of organic materials by means of radiocarbon accelerator mass spectrometry (AMS) to the analysis of the elemental composition of a wide range of materials (metals, obsidians, pottery) via ion beam analysis (IBA) techniques. At CEDAD (Centre for Dating and Diagnostics), the accelerator facility of the University of Salento, AMS 14C dating and PIXE (particle-induced X-ray emission)-PIGE (particle-induced gamma-ray emission) compositional analysis in external beam mode are combined to study certain archaeological materials. We present a review of the combined application of these analytical methods in the study of casting cores of the Riace bronzes, 2 classical Greek statues of extraordinary importance for the history of art.

Sign in / Sign up

Export Citation Format

Share Document