Total and Partial Absorption Coefficients for a Nitrogen Plasma

1985 ◽  
Author(s):  
R. D. Taylor ◽  
A. W. Ali
Keyword(s):  
Nitrogen Plasma ◽  
Absorption Coefficients

Interfacial properties of GaSb/InAs superlattices

1993 ◽  
Vol 51 ◽  
pp. 826-827
Author(s):  
M. E. Twigg ◽  
B. R. Bennett ◽  
J. R. Waterman ◽  
J. L. Davis ◽  
B. V. Shanabrook ◽  
...  
Keyword(s):  
Gaas Substrate ◽  
Molecular Beam ◽  
Infrared Detector ◽  
Interfacial Properties ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
Absorption Coefficients ◽  
X Ray ◽  
Short Period ◽  
High Optical Absorption

Recently, the GaSb/InAs superlattice system has received renewed attention. The interest stems from a model demonstrating that short period Ga1-xInxSb/InAs superlattices will have both a band gap less than 100 meV and high optical absorption coefficients, principal requirements for infrared detector applications. Because this superlattice system contains two species of cations and anions, it is possible to prepare either InSb-like or GaAs-like interfaces. As such, the system presents a unique opportunity to examine interfacial properties.We used molecular beam epitaxy (MBE) to prepare an extensive set of GaSb/InAs superlattices grown on an GaSb buffer, which, in turn had been grown on a (100) GaAs substrate. Through appropriate shutter sequences, the interfaces were directed to assume either an InSb-like or GaAs-like character. These superlattices were then studied with a variety of ex-situ probes such as x-ray diffraction and Raman spectroscopy. These probes confirmed that, indeed, predominantly InSb-like and GaAs-like interfaces had been achieved.

Estimation of chlorophyll content by absorption spectra of native Spirulina platensis cells

2020 ◽  
pp. 25-33
Author(s):  
Leonid E. Paramonov
Keyword(s):  
Chlorophyll Content ◽  
Chlorophyll A ◽  
Absorption Spectra ◽  
Spirulina Platensis ◽  
Intracellular Concentration ◽  
Absorption Coefficients

A method for retrieving the absorption coefficients of Spirulina platensis pigments using absorption spectra of native cells and excluding the use of extracts is considered. Estimates of the intracellular concentration of chlorophyll a, С-phycoerythrin, С- phycocyanin and allophycocyanin in native cells are discussed.

Coverage and Stability of NHx Terminated Cobalt and Ruthenium Surfaces: a First Principles Investigation

2019 ◽  
Author(s):  
Ji Liu ◽  
Michael Nolan
Keyword(s):  
Metal Surfaces ◽  
High Vacuum ◽  
Atomic Layer ◽  
Nitrogen Plasma ◽  
Operating Conditions ◽  
Ultra High Vacuum ◽  
Bridge Site ◽  
Stable Surface ◽  
Saturation Coverage ◽  
The Stability

<div>In the atomic layer deposition (ALD) of Cobalt (Co) and Ruthenium (Ru) metal using nitrogen plasma, the structure and composition of the post N-plasma NHx terminated (x = 1 or 2) metal surfaces are not well known but are important in the subsequent metal containing pulse. In this paper, we use the low-index (001) and (100) surfaces of Co and Ru as models of the metal polycrystalline thin films. The (001) surface with a hexagonal surface structure is the most stable surface and the (100) surface with a zigzag structure is the least stable surface but has high reactivity. We investigate the stability of NH and NH2 terminations on these surfaces to determine the saturation coverage of NHx on Co and Ru. NH is most stable in the hollow hcp site on (001) surface and the bridge site on the (100) surface, while NH2 prefers the bridge site on both (001) and (100) surfaces. The differential energy is calculated to find the saturation coverage of NH and NH2. We also present results on mixed NH/NH2-terminations. The results are analyzed by thermodynamics using Gibbs free energies (ΔG) to reveal temperature effects on the stability of NH and NH2 terminations. Ultra-high vacuum (UHV) and standard ALD</div><div>operating conditions are considered. Under typical ALD operating conditions we find that the most stable NHx terminated metal surfaces are 1 ML NH on Ru (001) surface (350K-550K), 5/9 ML NH on Co (001) surface (400K-650K) and a mixture of NH and NH2 on both Ru (100) and Co (100) surfaces.</div>

Kinetics of the Processes in a Nitrogen Plasma Flow with Carbon Admixture

2020 ◽  
Vol 58 (5) ◽  
pp. 671-680
Author(s):  
O. V. Korshunov ◽  
D. I. Kavyrshin ◽  
V. F. Chinnov
Keyword(s):  
Plasma Flow ◽  
Nitrogen Plasma ◽  
Kinetics Of

scholarly journals Effect of Low-Pressure Plasma Treatment Parameters on Wrinkle Features

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3852
Author(s):  
Bongjun Gu ◽  
Dongwook Ko ◽  
Sungjin Jo ◽  
Dong Choon Hyun ◽  
Hyeon-Ju Oh ◽  
...  
Keyword(s):  
Power Flow ◽  
Treatment Time ◽  
Argon Plasma ◽  
Negative Ions ◽  
Low Pressure ◽  
Nitrogen Plasma ◽  
Pressure Plasma ◽  
Positive Ions ◽  
Low Pressure Plasma ◽  
Optical Adhesive

Wrinkles attract significant attention due to their ability to enhance the mechanical and optical characteristics of various optoelectronic devices. We report the effect of the plasma gas type, power, flow rate, and treatment time on the wrinkle features. When an optical adhesive was treated using a low-pressure plasma of oxygen, argon, and nitrogen, the oxygen and argon plasma generated wrinkles with the lowest and highest wavelengths, respectively. The increase in the power of the nitrogen and oxygen plasma increased the wavelengths and heights of the wrinkles; however, the increase in the power of the argon plasma increased the wavelengths and decreased the heights of the wrinkles. Argon molecules are heavier and smaller than nitrogen and oxygen molecules that have similar weights and sizes; moreover, the argon plasma comprises positive ions while the oxygen and nitrogen plasma comprise negative ions. This resulted in differences in the wrinkle features. It was concluded that a combination of different plasma gases could achieve exclusive control over either the wavelength or the height and allow a thorough analysis of the correlation between the wrinkle features and the characteristics of the electronic devices.

Sign in / Sign up

Export Citation Format

Share Document