scholarly journals Differential Influences of Leaf Tip Trimming on Light Interception and Dry Matter Production in Tomato Dutch Cultivar Gourmet and Japanese Cultivar Momotaro York

HortScience ◽  
2017 ◽  
Vol 52 (5) ◽  
pp. 686-691 ◽  
Author(s):  
Tadahisa Higashide ◽  
Yuya Mochizuki ◽  
Takeshi Saito ◽  
Yasushi Kawasaki ◽  
Dong-Hyuk Ahn ◽  
...  

To investigate the influence of morphological changes in individual leaves of tomato on light interception and dry matter (DM) production, we altered leaf shape by trimming leaflets of young or mature leaves of the Dutch cultivar Gourmet and the Japanese cultivar Momotaro York. Young leaves 5-cm long were trimmed of their first and second leaflets from the leaf apex. Mature leaves were similarly trimmed at ≥71 days after transplanting (DAT). The individual leaf area (LA) of intact ‘Momotaro York’ leaves was significantly larger than that of ‘Gourmet’. Light–photosynthesis curves of the cultivars were almost identical. Mature-trimmed plants of both cultivars had a smaller individual LA and a smaller leaf area index (LAI), and a greater light-extinction coefficient (LEC). Although there was no significant difference in light-use efficiency (LUE) (i.e., DM production per unit intercepted solar radiation) in ‘Gourmet’ between trimming stages, LUE of ‘Momotaro York’ was decreased significantly by young-leaf trimming. Trimming of young leaves significantly decreased the LEC in ‘Gourmet’ but increased it in ‘Momotaro York’. Although leaf trimming would be impractical for commercial cultivation, these results may provide with a clue for breeding for yield improvement.

Proceedings ◽  
2019 ◽  
Vol 36 (1) ◽  
pp. 21
Author(s):  
Geetika ◽  
Rachaputi ◽  
Collins ◽  
Singh ◽  
Wenham ◽  
...  

Mungbean has become an important cash and legume rotation crop in the Australian Northern Grains region. Thus, it is necessary to narrow the gap between potential productivity and actual production by understanding the crop physiological attributes contributing to the acquisition of radiation, and it’s conversion into total biomass. A field experiment was conducted at Gatton, during 2018-19 summer season, growing two commercial varieties of mungbean; Jade-AU and Satin II under irrigated conditions. The varieties were planted at 0.5m and 1.0m row spacing and different plant densities. Weekly biomass cuts were taken from a square meter and separated into its components. The area of a green leaf sub-sample was used to compute the leaf area of the canopy. Weekly Ceptometer measurements were taken above and below the canopy at noon on clear, sunny days to obtain a measure of Fraction of radiation interception (Fi). Total shoot dry matter (TDM), pod dry mater (PDM) and leaf area index (LAI) was investigated. There was a significant effect of canopy density on Fi. There was no significant difference in total dry matter between the two varieties, however, there was a highly significant effect of canopy density on TDM. . A highly significant variation in LAI amongst the two varieties and across canopy densities, with Satin II having a higher mean LAI compared to Jade-AU. There was significant effect of canopy density on PDM. Our data indicate variation in dry matter production across canopy densities and there is a need to examine varietal differences in radiation use efficiency which may provide better understanding of hot the captured radiation is utilized in biomass production in mungbean.


2019 ◽  
Vol 7 ◽  
pp. 81-96
Author(s):  
A.K.M.R.B. Maduwanthi ◽  
Brintha Karunarathna

Compared to sole cropping, intercropping systems can more efficiently use the existing resources which ultimately lead to improved plant growth and dry matter accumulation. So, most of the farmers in developing countries can follow the intercropping systems with high yielding crop combinations. The experiment was carried out at the Crop Farm of Eastern University, Sri Lanka in 2018 to investigate the growth and dry matter accumulation in okra (Abelmoschus esculentus L.) as influenced by different planting patterns under okra-cowpea (Vigna unguiculata L. Walp) intercropping in sandy regosol. The experiment was laid out in a Randomized Complete Block Design (RCBD). Treatments were okra as a sole crop (T1), cowpea as a sole crop (T2), alternative planting of okra and cowpea (T3), 60/150 cm paired row planting of okra with two rows and three rows of cowpea in between paired rows (T4 and T5) and 75/120 cm paired row planting of okra with two rows and three rows of cowpea in between paired rows (T6 and T7). Plant height, root length, fresh and dry weights of plant, leaf area, leaf area index, canopy width and cumulative yield of okra were higher in T5, while chlorophyll content showed no significant difference (P>0.05) with different planting patterns. The present study concluded that 60/150 cm paired row planting of okra with three rows of cowpea in between paired rows (T5) would be the most suitable planting system in sandy regosol to achieve better growth and dry matter in okra.


2018 ◽  
Vol 3 (1) ◽  
pp. 110-121 ◽  
Author(s):  
Charanjit Singh Kahlon ◽  
Bin Li ◽  
James Board ◽  
Mahendra Dia ◽  
Parmodh Sharma ◽  
...  

Abstract Increased light interception (LI), along with concomitant increases in crop growth rate (CGR), is the main factor explaining how cultural factors such as row spacing, plant population, and planting date affect soybean yield. Leaf area index (LAI), LI, and CGR are interrelated in a “virtuous spiral” where increased LAI leads to greater LI resulting in a higher CGR and more total dry matter per area (TDM). This increases LAI, thus accelerating the entire physiological process to a higher level. A greater understanding of this complex growth dynamic process could be achieved through use of cluster analysis and principle components analysis (PCA). Cluster analysis involves grouping of similar objects in such way that objects in same cluster are similar to each other and dissimilar to objects in other cluster. PCA is a technique used to reduce a large set of variables to a few meaningful ones. Seasonal relative leaf area index (RLAI), relative light interception (RLI), and relative total dry matter (RTDM) response curves were determined from the data by a stepwise regression analysis in which these parameters were regressed against relative days after emergence (RDAE). Greatest levels of RLAI, RLI and RTDM were observed in soybean planted early on narrow row spacings and recorded greater plant population. In contrast, lower levels of these parameters occurred on plants with wide row spacings at late planting dates. For farmers, these results are useful in terms of adopting certain cultural practices which can help in the management of stress in soybean.


1980 ◽  
Vol 31 (4) ◽  
pp. 673 ◽  
Author(s):  
MM Ludlow ◽  
DA Charles-Edwards

Dry weight, leaf area, light interception and canopy photosynthesis were measured during 3- or 5-week regrowth periods of Setaria anceps/Desmodium intortum swards cut to 7.5 or 15 cm. Dry matter production during the experiment and over the growing season increased with cutting height and with interval between defoliations, but the proportion of grass to legume was unaffected. These effects of defoliation on dry matter production were similar to those estimated for integrated canopy photosynthesis from measured light interception and calculated leaf photosynthetic characteristics. Height and frequency of defoliation had no effect on canopy extinction coefficient for light, nor on the leaf photosynthetic characteristics, except for the first 1-2 weeks after defoliation when leaf photosynthetic rates appeared to be depressed. The main effects of height and frequency of defoliation on dry matter production were through their effects on leaf area index and light interception.


Author(s):  
Yi-Chen Pao ◽  
Katrin Kahlen ◽  
Tsu-Wei Chen ◽  
Dirk Wiechers ◽  
Hartmut Stützel

Abstract One-dimensional light models using the Beer-Lambert equation (BL) with the light extinction coefficient k are simple and robust tools for estimating light interception of homogeneous canopies. Functional-structural plant models (FSPMs) are powerful to capture light-plant interactions in heterogeneous canopies, but they are also more complex due to explicit descriptions of three-dimensional plant architecture and light models. For choosing an appropriate modelling approach, the trade-offs between simplicity and accuracy need to be considered when canopies with spatial heterogeneity are concerned. We compared two light modelling approaches, one following BL and another using ray tracing (RT), based on a framework of a dynamic FSPM of greenhouse cucumber. Resolutions of hourly-step (HS) and daily-step (DS) were applied to simulate light interception, leaf-level photosynthetic acclimation and plant-level dry matter production over growth periods of two to five weeks. Results showed that BL-HS was comparable to RT-HS in predicting shoot dry matter and photosynthetic parameters. The k used in the BL approach was simulated using an empirical relationship between k and leaf area index established with the assistance of RT, which showed variation up to 0.2 in k depending on canopy geometry under the same plant density. When a constant k value was used instead, a difference of 0.2 in k resulted in up to 27% loss in accuracy for shoot dry matter. These results suggested that, with the assistance of RT in k estimation, the simple approach BL-HS provided efficient estimation for long-term processes.


1989 ◽  
Vol 113 (3) ◽  
pp. 355-359 ◽  
Author(s):  
D. M. Firman ◽  
E. J. Allen

SUMMARYIn field studies of two varieties in Cambridge, UK, in 1985 and 1986, the percentage of total incident radiation intercepted by potato canopies with complete ground cover was as low as 80% for some plots but approached 100% in dense canopies. Although percentage ground cover is useful for assessing canopy growth, it is not wholly suitable for estimating light interception and may lead to serious errors in calculation of efficiency of conversion into dry matter.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xiaodan Wang ◽  
Yaliang Wang ◽  
Yuping Zhang ◽  
Jing Xiang ◽  
Yikai Zhang ◽  
...  

AbstractDetermination of the optimal fertilization method is crucial to maximize nitrogen use efficiency and yield of different rice cultivars. Side-deep fertilization with controlled-release nitrogen, in conjunction with machine transplanting and subsequent topdressing, was applied to Indica–japonica hybrid rice ‘Yongyou1540’ (YY1540) and indica hybrid rice ‘Tianyouhuazhan’ (TYHZ). Four nitrogen treatments were applied in 2018 and 2019: traditional nitrogen application with quick-release nitrogen (T1), single-dose deep fertilization at transplanting with 100% controlled-release nitrogen (T2), and deep fertilization of 70% controlled-release nitrogen and topdressing of 30% quick nitrogen at tillering (T3), or at panicle initiation (T4). Side-deep fertilization reduced the fertilizer application frequency without causing yield loss, T4 enhanced the yield of YY1540 by increasing the number of productive tillers and number of spikelets per panicle compared with T1, T2 and T3. The yield of TYHZ showed no significant difference among treatments. The T4 treatment decreased the number of tillers at the tilling peak stage and increased the percentage productive tillers and number of differentiated spikelets. Compared with the other treatments, T4 increased dry matter accumulation and leaf area index during panicle initiation and grain ripening, and contributed to enhanced nitrogen uptake and nitrogen utilization in YY1540. On average, nitrogen uptake and utilization in YY1540 were highest in T4, but no significant differences among treatments were observed in TYHZ. Dry matter accumulation and nitrogen uptake from panicle initiation to heading of YY1540 were correlated with number of spikelets per panicle, but no significant correlations were observed for TYHZ. Supplementary topdressing with quick-release nitrogen at the panicle initiation stage was required to increase yield of indica–japonica hybrid rice, whereas single-dose deep fertilization with controlled-release nitrogen is satisfactory for the indica hybrid cultivar.


2012 ◽  
Vol 10 (1) ◽  
pp. 16-22 ◽  
Author(s):  
M. Z. U. Kamal ◽  
M. N. Yousuf

The investigation was carried out to evaluate the effect of different organic manures on turmeric with reference to vegetative growth, biomass production, rhizome yield and its attributes of turmeric (Curcuma longa L.). Turmeric showed better response to the application of organic manures. Plant with neem cake application had the taller plant (79.30 cm), maximum number of tillers per plant (5.40), leaf number (5.40), leaf area (44.09) leaf area index (0.429), fresh weight of halum ( 190.05g), fresh weight of root (49.13 g), fresh weight of rhizome per plant (256.21 g) and dry weight of halum (15.21g), dry weight of root (7.32 g), dry weight of rhizome per plant (40.35 g), total dry matter yield (6.85 t ha-1) than those received other types of manures. Moreover, yield attributes such as number of mother rhizomes per plant-1 (1.75), more number of primary rhizomes per plant-1 (5.19), secondary rhizomes per plant-1 (18.03) and tertiary rhizomes per plant (7.69) were also highly accelerated by neem cake application. Similarly, the same treatment expressed the best in terms of size of mother rhizome (7.69 cm), primary rhizome (21.86 cm) and secondary rhizomes (7.05 cm).All these parameters in cumulative contributed to  produce the highest estimated fresh rhizomes yield & cured rhizomes yield (29.48 t ha-1, 5.59 t ha-1 respectively). The highest curing percentage (20.28) was observed in T3 treatment having mustard cake@ 2.0 t/ha. Thus, organic manure like neem cake was best fitted natural fertilizer for turmeric cultivation.DOI: http://dx.doi.org/10.3329/agric.v10i1.11060The Agriculturists 2012; 10(1): 16-22


Sign in / Sign up

Export Citation Format

Share Document