scholarly journals EFFECT OF ULTRA-FINE LIMESTONE ON THE PHYSICO-MECHANICAL PROPERTIES OF CEMENT PASTES

2010 ◽  
Vol 21 (Issue 1-A) ◽  
pp. 143-159
Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1109
Author(s):  
Mati Ullah Shah ◽  
Muhammad Usman ◽  
Muhammad Usman Hanif ◽  
Iqra Naseem ◽  
Sara Farooq

The huge amount of solid waste from the brick manufacturing industry can be used as a cement replacement. However, replacement exceeding 10% causes a reduction in strength due to the slowing of the pozzolanic reaction. Therefore, in this study, the pozzolanic potential of brick waste is enhanced using ultrafine brick powder with hydrated lime (HL). A total of six self-compacting paste mixes were studied. HL 2.5% by weight of binder was added in two formulations: 10% and 20% of waste burnt brick powder (WBBP), to activate the pozzolanic reaction. An increase in the water demand and setting time was observed by increasing the replacement percentage of WBBP. It was found that the mechanical properties of mixes containing 5% and 10% WBBP performed better than the control mix, while the mechanical properties of the mixes containing 20% WBBP were found to be almost equal to the control mix at 90 days. The addition of HL enhanced the early-age strength. Furthermore, WBBP formulations endorsed improvements in both durability and rheological properties, complemented by reduced early-age shrinkage. Overall, it was found that brick waste in ultrafine size has a very high degree of pozzolanic potential and can be effectively utilized as a supplementary cementitious material.


2021 ◽  
Vol 286 ◽  
pp. 122907
Author(s):  
Fábio C. Oliveira ◽  
Marcos P. Kassab ◽  
Natalia V. Silva ◽  
Sérgio C. Angulo ◽  
Luís Marcelo Tavares ◽  
...  

Open Physics ◽  
2011 ◽  
Vol 9 (6) ◽  
Author(s):  
Tomáš Ficker ◽  
Dalibor Martišek

AbstractThe 3D profile surface parameter H q and fractal dimension D were tested as indicators of mechanical properties inferred from fracture surfaces of porous solids. High porous hydrated cement pastes were used as prototypes of porous materials. Both the profile parameter H q and the fractal dimension D showed capability to assess compressive strength from the fracture surfaces of hydrated pastes. From a practical point of view the 3D profile parameter H q seems to be more convenient as an indicator of mechanical properties, as its values suffer much less from statistical scatter than those of fractal dimensions.


Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1617 ◽  
Author(s):  
Hyeonseok Jee ◽  
Jaeyeon Park ◽  
Erfan Zalnezhad ◽  
Keunhong Jeong ◽  
Seung Min Woo ◽  
...  

In recent years, nano-reinforcing technologies for cementitious materials have attracted considerable interest as a viable solution for compensating the poor cracking resistance of these materials. In this study, for the first time, titanium nanotubes (TNTs) were incorporated in cement pastes and their effect on the mechanical properties, microstructure, and early-age hydration kinetics was investigated. Experimental results showed that both compressive (~12%) and flexural strength (~23%) were enhanced with the addition of 0.5 wt.% of TNTs relative to plain cement paste at 28 days of curing. Moreover, it was found that, while TNTs accelerated the hydration kinetics of the pure cement clinker phase (C3S) in the early age of the reaction (within 24 h), there was no significant effect from adding TNTs on the hydration of ordinary Portland cement. TNTs appeared to compress the microstructure by filling the cement paste pore of sizes ranging from 10 to 100 nm. Furthermore, it could be clearly observed that the TNTs bridged the microcracks of cement paste. These results suggested that TNTs could be a great potential candidate since nano-reinforcing agents complement the shortcomings of cementitious materials.


2017 ◽  
Vol 33 (1) ◽  
pp. 450-457 ◽  
Author(s):  
El-Sayed Negim ◽  
Niyazbekova Rimma ◽  
Lyazzat Bekbayeva ◽  
Utelbayeva Akmaral ◽  
Bengin M. Herki ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document