scholarly journals Characterization of Titanium Nanotube Reinforced Cementitious Composites: Mechanical Properties, Microstructure, and Hydration

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1617 ◽  
Author(s):  
Hyeonseok Jee ◽  
Jaeyeon Park ◽  
Erfan Zalnezhad ◽  
Keunhong Jeong ◽  
Seung Min Woo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cement Paste ◽  
Cementitious Materials ◽  
Cement Clinker ◽  
Early Age ◽  
Potential Candidate ◽  
Hydration Kinetics ◽  
Cement Pastes ◽  
Viable Solution ◽  
First Time

In recent years, nano-reinforcing technologies for cementitious materials have attracted considerable interest as a viable solution for compensating the poor cracking resistance of these materials. In this study, for the first time, titanium nanotubes (TNTs) were incorporated in cement pastes and their effect on the mechanical properties, microstructure, and early-age hydration kinetics was investigated. Experimental results showed that both compressive (~12%) and flexural strength (~23%) were enhanced with the addition of 0.5 wt.% of TNTs relative to plain cement paste at 28 days of curing. Moreover, it was found that, while TNTs accelerated the hydration kinetics of the pure cement clinker phase (C3S) in the early age of the reaction (within 24 h), there was no significant effect from adding TNTs on the hydration of ordinary Portland cement. TNTs appeared to compress the microstructure by filling the cement paste pore of sizes ranging from 10 to 100 nm. Furthermore, it could be clearly observed that the TNTs bridged the microcracks of cement paste. These results suggested that TNTs could be a great potential candidate since nano-reinforcing agents complement the shortcomings of cementitious materials.

scholarly journals Hydration and Strength Development of Cementitious Materials Prepared with Phosphorous-Bearing Clinkers

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 508
Author(s):  
Lilan Xie ◽  
Min Deng ◽  
Jinhui Tang ◽  
Kaiwei Liu
Keyword(s):  
Mechanical Properties ◽  
Raw Materials ◽  
Cementitious Materials ◽  
Raw Material ◽  
Strength Development ◽  
Hydration Reaction ◽  
Low Grade ◽  
Hydration Kinetics ◽  
Cement Pastes ◽  
The One

To rationally use low-grade phosphorous limestone as the raw materials for cement production, the influence of phosphorous introduced by fluorapatite during the clinker calcination process on the mechanical properties of cementitious materials is investigated. Hydration kinetics, phase evolutions, and microstructure of cement pastes have been studied by using calorimetry, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results indicate that the mechanical properties of cementitious materials can be slightly improved due to the mineralization effect of the small amount of phosphorous in the clinker and significantly decreased with an increase of phosphorous. High content of phosphorous will reduce the content of C3S and make the formation of α′-C2S-xC3P(x: 0–0.05), whose hydration reactivity is rather lower, such that on the one hand less-hydrated products, such as calcium silicate hydrate (C-S-H) gel, can be obtained, and on the other hand, the hydration reaction will be slowed by severely prolonging the induction period. Interestingly, small particles can be observed on the surface of hydration products, but no new phase can be detected by XRD. When the content of P2O5 is 2.0%, the cement can meet the requirements of P·II 42.5 cement in China. Hopefully, this can provide significant guidance for the use of cement prepared by fluorapatite as raw material.

scholarly journals Utilization of Solid Waste from Brick Industry and Hydrated Lime in Self-Compacting Cement Pastes

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1109
Author(s):  
Mati Ullah Shah ◽  
Muhammad Usman ◽  
Muhammad Usman Hanif ◽  
Iqra Naseem ◽  
Sara Farooq
Keyword(s):  
Mechanical Properties ◽  
Solid Waste ◽  
Manufacturing Industry ◽  
Setting Time ◽  
Hydrated Lime ◽  
Pozzolanic Reaction ◽  
Early Age ◽  
Cement Pastes ◽  
Brick Powder ◽  
High Degree

The huge amount of solid waste from the brick manufacturing industry can be used as a cement replacement. However, replacement exceeding 10% causes a reduction in strength due to the slowing of the pozzolanic reaction. Therefore, in this study, the pozzolanic potential of brick waste is enhanced using ultrafine brick powder with hydrated lime (HL). A total of six self-compacting paste mixes were studied. HL 2.5% by weight of binder was added in two formulations: 10% and 20% of waste burnt brick powder (WBBP), to activate the pozzolanic reaction. An increase in the water demand and setting time was observed by increasing the replacement percentage of WBBP. It was found that the mechanical properties of mixes containing 5% and 10% WBBP performed better than the control mix, while the mechanical properties of the mixes containing 20% WBBP were found to be almost equal to the control mix at 90 days. The addition of HL enhanced the early-age strength. Furthermore, WBBP formulations endorsed improvements in both durability and rheological properties, complemented by reduced early-age shrinkage. Overall, it was found that brick waste in ultrafine size has a very high degree of pozzolanic potential and can be effectively utilized as a supplementary cementitious material.

scholarly journals Effect of nano-SnO2 on early-age hydration of Portland cement paste

2019 ◽  
Vol 11 (6) ◽  
pp. 168781401985194 ◽  
Author(s):  
Jianping Zhu ◽  
Genshen Li ◽  
Ruijie Xia ◽  
Huanhuan Hou ◽  
Haibin Yin ◽  
...  
Keyword(s):  
Portland Cement ◽  
Cement Paste ◽  
Cement Hydration ◽  
Cementitious Materials ◽  
Hydration Process ◽  
Strength Development ◽  
Early Age ◽  
Test Machine ◽  
Portland Cement Paste ◽  
Scanning Electron

Nanomaterial, as a new emerging material in the field of civil engineering, has been widely utilized to enhance the mechanical properties of cementitious material. Nano-SnO2 has presented high hardness characteristics, but there is little study of the application of nano-SnO2 in the cementitious materials. This study mainly investigated the hydration characteristics and strength development of Portland cement paste incorporating nano-SnO2 powders with 0%, 0.08%, and 0.20% dosage. It was found that the early-age compressive strength of cement paste could be greatly improved when nano-SnO2 was incorporated with 0.08% dosage. The hydration process and microstructure were then measured by hydraulic test machine, calorimeter, nanoindentation, X-ray diffraction, scanning electron microscope, and mercury intrusion porosimetry. It was found that the cement hydration process was promoted by the addition of nano-SnO2, and the total amount of heat released from cement hydration is also increased. In addition, the addition of nano-SnO2 can promote the generations of high density C-S-H and reduce the generations of low density C-S-H indicating the nucleation effect of nano-SnO2 in the crystal growth process. The porosity and probable pore diameter of cement paste with 0.08% nano-SnO2 were decreased, and the scanning electron microscopic results also show that the cement paste with 0.08% nano-SnO2 promotes the densification of cement microstructure, which are consistent with the strength performance.

scholarly journals Additive Manufacturing of Cementitious Materials by Selective Paste Intrusion: Numerical Modeling of the Flow Using a 2D Axisymmetric Phase Field Method

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5024
Author(s):  
Alexandre Pierre ◽  
Daniel Weger ◽  
Arnaud Perrot ◽  
Dirk Lowke
Keyword(s):  
Numerical Modeling ◽  
3D Printing ◽  
Cement Paste ◽  
Phase Field ◽  
Numerical Approach ◽  
Cementitious Materials ◽  
Field Method ◽  
Phase Field Method ◽  
Shape Accuracy ◽  
Cement Pastes

The 3D printing of concrete has now entered a new era and a transformation of the construction sector is expected to reshape fabrication with concrete. This work focuses on the selective paste intrusion method, which consists of bonding dry particles of aggregate with a cement paste. This innovative technique could lead to the production of very precise component for specific applications. The main obstacle to tackle in order to reach a high shape accuracy of high mechanical performances of 3D printing elements by selectively activating the material is the control of the distribution of the cement paste through the particle bed. With the aim to better understand the path followed by the solution as it penetrates a cut-section of the granular packing, two-dimensional numerical modeling is carried out using Comsol software. A phase-field method combined with a continuous visco-plastic model has been used to study the influence of the average grain diameter, the contact angle, and the rheological properties of cement pastes on the penetration depth. We compare the numerical modeling results to existing experimental results from 3D experiments and a one-dimensional analytical model. We then highlight that the proposed numerical approach is reliable to predict the final penetration of the cement pastes.

scholarly journals EARLY AGE POROSITY AND PORE SIZE DISTRIBUTION OF CEMENT PASTE WITH FLUE GAS DESULPHURISATION (FGD) WASTE

2013 ◽  
Vol 19 (5) ◽  
pp. 622-627 ◽  
Author(s):  
Jamal M. Khatib ◽  
Pritpal S. Mangat ◽  
Lee Wright
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Cement Paste ◽  
Flue Gas ◽  
Early Stage ◽  
Early Age ◽  
Cement Pastes ◽  
Binder Ratio ◽  
Water To Binder Ratio

This paper is part of a wide-ranging investigation on the use of flue gas desulphurisation (FGD) waste in cement-based materials. It reports the results on the porosity and pore size distribution of cement paste containing varying amounts of simulated FGD waste. The water to binder ratio was 0.5. The binder consists of cement and simulated FGD. The FGD is a combination of fly ash and gypsum ranging from 0% to 100%. Cement in the pastes was partially replaced with 25% FGD (by weight). The porosity and pore size distribution of cement pastes was determined during the early stage of hydration. Increasing the amount of gypsum does not increase the pore volume. However, increasing the amount of gypsum in the paste leads to an increase in the threshold diameter and a decrease in the percentage of small pores in the paste, both indicating a coarser pore structure. The results of this investigation were compared with data at longer curing periods.

Nano Titania Reinforced Limestone Cement: Physico-Mechanical Investgation

2018 ◽  
Vol 786 ◽  
pp. 248-257
Author(s):  
Mohmoud A. Abuelseoud ◽  
Asmaa S. Hamouda ◽  
Ibrahim M. Ismail ◽  
M.A. El-Sheikh
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Hydraulic Properties ◽  
Water Retention ◽  
Physical And Mechanical Properties ◽  
Sem Analysis ◽  
Cement Clinker ◽  
Titanium Silicate ◽  
Cement Pastes ◽  
Limestone Cement

Studying physical and mechanical properties of limestone cement pastes blended by TiO2 nanoparticles (i.e., particle size less than 100 nm). Three mixes are prepared for this study (5.00, 10.00 and 25.00 wt. % of limestone) partially replaced cement/clinker by TiO2 nanoparticles. Fillers are carefully selected which reinforcing cement workability or water retention they could be inert or have slightly hydraulic properties. Limestone is most common filler that fills the pores between cement particles due to the formation of monocarboaluminate, while nanoparticles increase the hydration C-S-H gel product and calcium titanium silicate which hardened the cement pastes. Nanoparticles show a great effect in reinforcing the mechanical strength of cement pastes due to the fact that TiO2-nanoparticles act as active nuclei site forming C-S-H gel observed as honeycomb-like plus improving cement to water demined (W/C) ratio. SEM analysis proves that the morphology of cement structure is well arranged and compacted.

Utilization of Nano Silica as Cement Paste in Mortar and Porous Concrete Pavement

2015 ◽  
Vol 1113 ◽  
pp. 135-139 ◽  
Author(s):  
Mohd Yusak Mohd Ibrahim ◽  
Putra Jaya Ramadhansyah ◽  
Hainin Mohd Rosli ◽  
Mohd Haziman Wan Ibrahim ◽  
M.N. Fadzli
Keyword(s):  
Mechanical Properties ◽  
Cement Paste ◽  
Cementitious Materials ◽  
Concrete Pavement ◽  
Strengthening Effect ◽  
Nano Silica ◽  
Porous Concrete ◽  
The Right

The high percentage of porosity in porous concrete pavement tends to decrease its strength. In concrete industry, nano silica is one of the most popular materials that will improve the properties of cementitious materials. This paper, prepared to review the effect of nano silica in cement paste and mortar related to porous concrete pavement. It was found that, by incorporating nano silica with the right composition in cement paste and mortar, it will improve their mechanical properties. By incorporating nano silica in the mixture, it can be predicted that the strengthening effect of nano silica would be further enhanced in porous concrete because the nano silica improve not only the cement paste, but also the interface between paste and aggregate.

scholarly journals Cement Paste Mixture Proportioning with Particle Packing Theory: An Ambiguous Effect of Microsilica

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6970
Author(s):  
Paweł Niewiadomski ◽  
Anna Karolak ◽  
Damian Stefaniuk ◽  
Aleksandra Królicka ◽  
Jacek Szymanowski ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cement Paste ◽  
Building Materials ◽  
Mechanical Performance ◽  
Physical And Mechanical Properties ◽  
Sio2 Nanoparticles ◽  
Negative Influence ◽  
Particle Packing ◽  
Cement Pastes ◽  
Low Porosity

Recently, the research of innovative building materials is focused on applying supplementary materials in the form of micro- and nanopowders in cementitious composites due to the growing insistence on sustainable development. Considering above, in paper, a research on the effect of microsilica and SiO2 nanoparticles addition to cement paste, designed with Andreasen and Andersen (AA) packing density model (PDM), in terms of its physical and mechanical properties was conducted. Density, porosity, compressive strength, hardness, and modulus of indentation were investigated and compared regarding different amount of additives used in cement paste mixes. Microstructure of the obtained pastes was analyzed. The possibility of negative influence of alkali-silica reaction (ASR) on the mechanical properties of the obtained composites was analyzed. The results of the conducted investigations were discussed, and conclusions, also practical, were presented. The obtained results confirmed that the applied PDM may be an effective tool in cement paste design, when low porosity of prepared composite is required. On the other hand, the application of AA model did not bring satisfactory results of mechanical performance as expected, what was related, as shown by SEM imaging, with inhomogeneous dispersion of microsilica, and creation of agglomerates acting as reactive aggregates, what as a consequence caused ASR reaction, crack occurrence and lowered mechanical properties. Finally, the study found that the use of about 7.5% wt. of microsilica is the optimum in regards to obtain low porosity, while, to achieve improved mechanical properties, the use of 4 wt. % of microsilica seems to be optimal, in the case of tested cement pastes.

Sign in / Sign up

Export Citation Format

Share Document