Ecophysiology and niche differentiation of Nitrospira-like bacteria, the key nitrite oxidizers in wastewater treatment plants

2006 ◽  
Vol 54 (1) ◽  
pp. 21-27 ◽  
Author(s):  
H. Daims ◽  
F. Maixner ◽  
S. Lücker ◽  
K. Stoecker ◽  
K. Hace ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Laser Scanning ◽  
Wastewater Treatment Plants ◽  
Niche Differentiation ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Environmental Genomics ◽  
Nitrite Oxidizing Bacteria ◽  
Pure Cultures ◽  
Nitrite Oxidizers

Nitrite-oxidizing bacteria of the genus Nitrospira are key nitrifiers in wastewater treatment plants. Pure cultures of these organisms are unavailable, but cultivation-independent molecular methods make it possible to detect Nitrospira-like bacteria in environmental samples and to investigate their ecophysiology. Comprehensive screening of natural and engineered habitats and of public databases for 16S rRNA sequences of Nitrospira-like bacteria revealed a surprisingly high biodiversity in the genus Nitrospira, which comprises at least four phylogenetic sublineages. All Nitrospira-like bacteria detected in wastewater treatment plants belonged to the sublineages I and II. Subsequently, the population dynamics of different Nitrospira-like bacteria were monitored, by quantitative fluorescence in situ hybridization with rRNA-targeted probes, confocal laser scanning microscopy and digital image analysis, during incubation of nitrifying activated sludge in media containing different nitrite concentrations. These experiments showed that Nitrospira-like bacteria, which were affiliated with the phylogenetic sublineages I or II of the genus Nitrospira, responded differently to nitrite concentration shifts. Previously unknown properties of Nitrospira-like bacteria were discovered in the course of an environmental genomics project. Implications of the obtained results for fundamental understanding of the microbial ecology of nitrite oxidizers as well as for future improvement of nutrient removal in wastewater treatment plants are discussed.

scholarly journals In Situ Characterization ofNitrospira-Like Nitrite-Oxidizing Bacteria Active in Wastewater Treatment Plants

2001 ◽  
Vol 67 (11) ◽  
pp. 5273-5284 ◽  
Author(s):  
Holger Daims ◽  
Jeppe L. Nielsen ◽  
Per H. Nielsen ◽  
Karl-Heinz Schleifer ◽  
Michael Wagner
Keyword(s):  
Wastewater Treatment ◽  
16S Rrna ◽  
Laser Scanning ◽  
Wastewater Treatment Plants ◽  
Carbon Sources ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Rrna Gene ◽  
Phylogenetic Affiliation

ABSTRACT Uncultivated Nitrospira-like bacteria in different biofilm and activated-sludge samples were investigated by cultivation-independent molecular approaches. Initially, the phylogenetic affiliation of Nitrospira-like bacteria in a nitrifying biofilm was determined by 16S rRNA gene sequence analysis. Subsequently, a phylogenetic consensus tree of theNitrospira phylum including all publicly available sequences was constructed. This analysis revealed that the genusNitrospira consists of at least four distinct sublineages. Based on these data, two 16S rRNA-directed oligonucleotide probes specific for the phylum and genus Nitrospira, respectively, were developed and evaluated for suitability for fluorescence in situ hybridization (FISH). The probes were used to investigate the in situ architecture of cell aggregates ofNitrospira-like nitrite oxidizers in wastewater treatment plants by FISH, confocal laser scanning microscopy, and computer-aided three-dimensional visualization. Cavities and a network of cell-free channels inside the Nitrospiramicrocolonies were detected that were water permeable, as demonstrated by fluorescein staining. The uptake of different carbon sources byNitrospira-like bacteria within their natural habitat under different incubation conditions was studied by combined FISH and microautoradiography. Under aerobic conditions, theNitrospira-like bacteria in bioreactor samples took up inorganic carbon (as HCO3 − or as CO2) and pyruvate but not acetate, butyrate, and propionate, suggesting that these bacteria can grow mixotrophically in the presence of pyruvate. In contrast, no uptake by theNitrospira-like bacteria of any of the carbon sources tested was observed under anoxic or anaerobic conditions.

Nitrification in sequencing biofilm batch reactors: lessons from molecular approaches

2001 ◽  
Vol 43 (3) ◽  
pp. 9-18 ◽  
Author(s):  
H. Daims ◽  
U. Purkhold ◽  
L. Bjerrum ◽  
E. Arnold ◽  
P. A. Wilderer ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Amoa Gene ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Molecular Evidence ◽  
Organic Substrates ◽  
Gene Fragment ◽  
Ammonia Oxidizers ◽  
Oxidation Rates ◽  
Nitrite Oxidizers

The nitrifying microbial diversity and population structure of a sequencing biofilm batch reactor receiving sewage with high ammonia and salt concentrations (SBBR 1) was analyzed by the full-cycle rRNA approach. The diversity of ammonia-oxidizers in this reactor was additionally investigated using comparative sequence analysis of a gene fragment of the ammonia monooxygenase (amoA), which represents a key enzyme of all ammonia-oxidizers. Despite the “extreme” conditions in the reactor, a surprisingly high diversity of ammonia- and nitrite-oxidizers was observed to occur within the biofilm. In addition, molecular evidence for the existence of novel ammonia-oxidizers is presented. Quantification of ammonia- and nitrite-oxidizers in the biofilm by Fluorescent In situ Hybridization (FISH) and digital image analysis revealed that ammonia-oxidizers occurred in higher cell numbers and occupied a considerably larger share of the total biovolume than nitrite-oxidizing bacteria. In addition, ammonia oxidation rates per cell were calculated for different WWTPs following the quantification of ammonia-oxidizers by competitive PCR of an amoA gene fragment. The morphology of nitrite-oxidizing, unculturable Nitrospira-like bacteria was studied using FISH, confocal laser scanning microscopy (CLSM) and three-dimensional visualization. Thereby, a complex network of microchannels and cavities was detected within microcolonies of Nitrospira-like bacteria. Microautoradiography combined with FISH was applied to investigate the ability of these organisms to use CO2 as carbon source and to take up other organic substrates under varying conditions. Implications of the obtained results for fundamental understanding of the microbial ecology of nitrifiers as well as for future improvement of nutrient removal in wastewater treatment plants (WWTPs) are discussed.

scholarly journals Amyloid-Like Adhesins Produced by Floc-Forming and Filamentous Bacteria in Activated Sludge

2008 ◽  
Vol 74 (5) ◽  
pp. 1517-1526 ◽  
Author(s):  
Poul Larsen ◽  
Jeppe Lund Nielsen ◽  
Daniel Otzen ◽  
Per Halkjær Nielsen
Keyword(s):  
Activated Sludge ◽  
Laser Scanning ◽  
Extracellular Polymeric Substances ◽  
Amyloid Fibrils ◽  
Wastewater Treatment Plants ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Bacterial Cells ◽  
Filamentous Bacteria ◽  
Foam Forming

ABSTRACT Amyloid proteins (fimbriae or other microbial surface-associated structures) are expressed by many types of bacteria, not yet identified, in biofilms from various habitats, where they likely are of key importance to biofilm formation and biofilm properties. As these amyloids are potentially of great importance to the floc properties in activated sludge wastewater treatment plants (WWTP), the abundance of amyloid adhesins in activated sludge flocs from different WWTP and the identity of bacteria producing these were investigated. Amyloid adhesins were quantified using a combination of conformationally specific antibodies targeting amyloid fibrils, propidium iodide to target all fixed bacterial cells, confocal laser scanning microscopy, and digital image analysis. The biovolume fraction containing amyloid adhesins ranged from 10 to 40% in activated sludge from 10 different WWTP. The identity of bacteria producing amyloid adhesins was determined using fluorescence in situ hybridization with oligonucleotide probes in combination with antibodies or thioflavin T staining. Among the microcolony-forming bacteria, amyloids were primarily detected among Alpha- and Betaproteobacteria and Actinobacteria. A more detailed analysis revealed that many denitrifiers (from Thauera, Azoarcus, Zoogloea, and Aquaspirillum-related organisms) and Actinobacteria-related polyphosphate-accumulating organisms most likely produced amyloid adhesins, whereas nitrifiers did not. Many filamentous bacteria also expressed amyloid adhesins, including several Alphaproteobacteria (e.g., Meganema perideroedes), some Betaproteobacteria (e.g., Aquaspirillum-related filaments), Gammaproteobacteria (Thiothrix), Bacteroidetes, Chloroflexi (e.g., Eikelboom type 1851), and some foam-forming Actinobacteria (e.g., Gordonia amarae). The results show that amyloid adhesins were an abundant component of activated sludge extracellular polymeric substances and seem to have unexpected, divers functions.

3-D imaging of cells using a confocal laser scanning microscope and digital image processing

1988 ◽  
Vol 46 ◽  
pp. 96-97
Author(s):  
Thomas M. Jovin ◽  
Michel Robert-Nicoud ◽  
Donna J. Arndt-Jovin ◽  
Thorsten Schormann
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Scanning Microscope ◽  
Laser Scanning Microscope ◽  
Biochemical Processes ◽  
Adjacent Structures

Light microscopic techniques for visualizing biomolecules and biochemical processes in situ have become indispensable in studies concerning the structural organization of supramolecular assemblies in cells and of processes during the cell cycle, transformation, differentiation, and development. Confocal laser scanning microscopy offers a number of advantages for the in situ localization and quantitation of fluorescence labeled targets and probes: (i) rejection of interfering signals emanating from out-of-focus and adjacent structures, allowing the “optical sectioning” of the specimen and 3-D reconstruction without time consuming deconvolution; (ii) increased spatial resolution; (iii) electronic control of contrast and magnification; (iv) simultanous imaging of the specimen by optical phenomena based on incident, scattered, emitted, and transmitted light; and (v) simultanous use of different fluorescent probes and types of detectors.We currently use a confocal laser scanning microscope CLSM (Zeiss, Oberkochen) equipped with 3-laser excitation (u.v - visible) and confocal optics in the fluorescence mode, as well as a computer-controlled X-Y-Z scanning stage with 0.1 μ resolution.

Vacuoles Induced in Mammalian Cells by Helicobacter Cytotoxin are Acidic Organelles

1990 ◽  
Vol 48 (3) ◽  
pp. 168-169
Author(s):  
M. H. Chestnut ◽  
C. E. Catrenich
Keyword(s):  
Acridine Orange ◽  
Mammalian Cells ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Ulcer Disease ◽  
Gastroduodenal Disease ◽  
H Pylori

Helicobacter pylori is a non-invasive, Gram-negative spiral bacterium first identified in 1983, and subsequently implicated in the pathogenesis of gastroduodenal disease including gastritis and peptic ulcer disease. Cytotoxic activity, manifested by intracytoplasmic vacuolation of mammalian cells in vitro, was identified in 55% of H. pylori strains examined. The vacuoles increase in number and size during extended incubation, resulting in vacuolar and cellular degeneration after 24 h to 48 h. Vacuolation of gastric epithelial cells is also observed in vivo during infection by H. pylori. A high molecular weight, heat labile protein is believed to be responsible for vacuolation and to significantly contribute to the development of gastroduodenal disease in humans. The mechanism by which the cytotoxin exerts its effect is unknown, as is the intracellular origin of the vacuolar membrane and contents. Acridine orange is a membrane-permeant weak base that initially accumulates in low-pH compartments. We have used acridine orange accumulation in conjunction with confocal laser scanning microscopy of toxin-treated cells to begin probing the nature and origin of these vacuoles.

Use of confocal laser scanning microscopy and a computer model to understand ink cavitation and filamentation

TAPPI Journal ◽  
2010 ◽  
Vol 9 (10) ◽  
pp. 7-15
Author(s):  
HANNA KOIVULA ◽  
DOUGLAS BOUSFIELD ◽  
MARTTI TOIVAKKA
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Print Quality ◽  
Length Scale ◽  
Offset Printing ◽  
Significant Difference ◽  
Printing Speed

In the offset printing process, ink film splitting has an important impact on formation of ink filaments. The filament size and its distribution influence the leveling of ink and hence affect ink setting and the print quality. However, ink filaments are difficult to image due to their short lifetime and fine length scale. Due to this difficulty, limited work has been reported on the parameters that influence filament size and methods to characterize it. We imaged ink filament remains and quantified some of their characteristics by changing printing speed, ink amount, and fountain solution type. Printed samples were prepared using a laboratory printability tester with varying ink levels and operating settings. Rhodamine B dye was incorporated into fountain solutions to aid in the detection of the filaments. The prints were then imaged with a confocal laser scanning microscope (CLSM) and images were further analyzed for their surface topography. Modeling of the pressure pulses in the printing nip was included to better understand the mechanism of filament formation and the origin of filament length scale. Printing speed and ink amount changed the size distribution of the observed filament remains. There was no significant difference between fountain solutions with or without isopropyl alcohol on the observed patterns of the filament remains.

ACTIVATED SLUDGE FLOC CHARACTERIZATION BY CONFOCAL LASER SCANNING MICROSCOPY

2012 ◽  
Vol 11 (3) ◽  
pp. 669-674 ◽  
Author(s):  
Szabolcs Szilveszter ◽  
Botond Raduly ◽  
Szilard Bucs ◽  
Beata Abraham ◽  
Szabolcs Lanyi ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Confocal Laser Scanning Microscopy ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Scanning Microscopy ◽  
Confocal Laser

Cuticular structures in the copulatory apparatus of Planorbis planorbis (Linnaeus, 1758) (Gastropoda: Pulmonata: Planorbidae)

2009 ◽  
Vol 18 (1) ◽  
pp. 11-16
Author(s):  
E.V. Soldatenko ◽  
A.A. Petrov
Keyword(s):  
Light Microscopy ◽  
Confocal Laser Scanning Microscopy ◽  
Laser Scanning ◽  
Taxonomic Status ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Copulatory Apparatus ◽  
The Family ◽  
Cuticular Structures

The morphology of the copulatory apparatus and associated cuticular structures in Planorbis planorbis was studied by light microscopy, SEM, TEM and confocal laser scanning microscopy. The significance of these cuticular structures for the taxonomic status of the species and for the systematics of the family Planorbidae in general is discussed.

Sign in / Sign up

Export Citation Format

Share Document