scholarly journals Nitrogen removal and microbial communities of a completely autotrophic nitrogen removal over nitrite (CANON) sequencing batch biofilm reactor (SBBR) at different inorganic carbon (IC) concentrations

2020 ◽  
Vol 81 (5) ◽  
pp. 1071-1079
Author(s):  
Caimeng Wang ◽  
Lirong Lei ◽  
Fangrui Cai ◽  
Youming Li
Keyword(s):  
Nitrogen Removal ◽  
Inorganic Nitrogen ◽  
Biofilm Reactor ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Sequencing Batch Biofilm Reactor ◽  
Microbial Analysis ◽  
Total Inorganic Nitrogen ◽  
Canon Process ◽  
Autotrophic Nitrogen Removal

Abstract In this study, the completely autotrophic nitrogen removal over nitrite (CANON) process was initiated in a sequencing batch biofilm reactor (SBBR). Then the reactor was operated under different IC/N ratios. The total inorganic nitrogen removal efficiency (TINRE) at IC/N ratios of 0.75, 1.0, 1.25, 1.5 and 2.0 were 37.0 ± 11.0%, 58.9 ± 10.2%, 73.9 ± 3.2%, 73.6 ± 1.8% and 72.6 ± 2.0%, respectively. The suitable range of IC/N ratio in this research is 1.25–2.0. The poor nitrogen removal performance at IC/N ratio of 0.75 was due to the lack of growth substrate for AnAOB and low pH simultaneously; at IC/N ratio of 1.0 this was because the substrate concentration was insufficient for fully recovering the AnAOB activities. Microbial analysis indicated that Nitrosomonas, Nitrospira and Candidatus Brocadia were the main ammonium oxidation bacteria (AOB), nitrite oxidation bacteria (NOB) and anammox bacteria (AnAOB), respectively. In addition, at IC ratios of 1.25 or higher, denitrification was promoted with the rise of IC/N ratio, which might be because the change of IC concentrations caused cell lysis of microorganisms and provided organic matter for denitrification.

scholarly journals Enhanced Nitrogen Removal from Domestic Wastewater by Partial-Denitrification/Anammox in an Anoxic/Oxic Biofilm Reactor

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 109
Author(s):  
Yu Huang ◽  
Yongzhen Peng ◽  
Donghui Huang ◽  
Jiarui Fan ◽  
Rui Du
Keyword(s):  
Nitrogen Removal ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Biofilm Reactor ◽  
Anammox Bacteria ◽  
Stable Operation ◽  
Ammonium Oxidation ◽  
N Accumulation ◽  
Carbon Demand ◽  
Oxidation Efficiency

A partial-denitrification coupling with anaerobic ammonium oxidation (anammox) process (PD/A) in a continuous-flow anoxic/oxic (A/O) biofilm reactor was developed to treat carbon-limited domestic wastewater (ammonia (NH4+-N) of 55 mg/L and chemical oxygen demand (COD) of 148 mg/L in average) for about 200 days operation. Satisfactory NH4+-N oxidation efficiency above 95% was achieved with rapid biofilm formation in the aerobic zone. Notably, nitrite (NO2−-N) accumulation was observed in the anoxic zone, mainly due to the insufficient electron donor for complete nitrate (NO3−-N) reduction. The nitrate-to-nitrite transformation ratio (NTR) achieved was as high as 64.4%. After the inoculation of anammox-enriched sludge to anoxic zones, total nitrogen (TN) removal was significantly improved from 37.3% to 78.0%. Anammox bacteria were effectively retained in anoxic biofilm utilizing NO2−-N produced via the PD approach and NH4+-N in domestic wastewater, with the relative abundance of 5.83% for stable operation. Anammox pathway contributed to TN removal by a high level of 38%. Overall, this study provided a promising method for mainstream nitrogen removal with low energy consumption and organic carbon demand.

scholarly journals Start-Up and Aeration Strategies for a Completely Autotrophic Nitrogen Removal Process in an SBR

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Xiaoling Zhang ◽  
Fan Zhang ◽  
Yanhong Zhao ◽  
Zhengqun Li
Keyword(s):  
Removal Efficiency ◽  
Total Nitrogen ◽  
Nitrogen Removal ◽  
Tap Water ◽  
Granular Sludge ◽  
Anammox Bacteria ◽  
Intermittent Aeration ◽  
Start Up ◽  
Canon Process ◽  
Autotrophic Nitrogen Removal

The start-up and performance of the completely autotrophic nitrogen removal via nitrite (CANON) process were examined in a sequencing batch reactor (SBR) with intermittent aeration. Initially, partial nitrification was established, and then the DO concentration was lowered further, surplus water in the SBR with high nitrite was replaced with tap water, and continuous aeration mode was turned into intermittent aeration mode, while the removal of total nitrogen was still weak. However, the total nitrogen (TN) removal efficiency and nitrogen removal loading reached 83.07% and 0.422 kgN/(m3·d), respectively, 14 days after inoculating 0.15 g of CANON biofilm biomass into the SBR. The aggregates formed in SBR were the mixture of activated sludge and granular sludge; the volume ratio of floc and granular sludge was 7 : 3. DNA analysis showed that Planctomycetes-like anammox bacteria and Nitrosomonas-like aerobic ammonium oxidization bacteria were dominant bacteria in the reactor. The influence of aeration strategies on CANON process was investigated using batch tests. The result showed that the strategy of alternating aeration (1 h) and nonaeration (1 h) was optimum, which can obtain almost the same TN removal efficiency as continuous aeration while reducing the energy consumption, inhibiting the activity of NOB, and enhancing the activity of AAOB.

scholarly journals Model-based analysis of microbial consortia and microbial products in an anammox biofilm reactor

2018 ◽  
Vol 77 (7) ◽  
pp. 1951-1959 ◽  
Author(s):  
M. Azari ◽  
A. V. Le ◽  
M. Lübken ◽  
M. Denecke
Keyword(s):  
Relative Abundance ◽  
Inorganic Nitrogen ◽  
Biofilm Reactor ◽  
Microbial Consortia ◽  
Nitrifying Bacteria ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Leachate Treatment ◽  
Model Based ◽  
Microbial Products

Abstract A mathematical model for a granular biofilm reactor for leachate treatment was validated by long-term measured data to investigate the mechanisms and drivers influencing biological nitrogen removal and microbial consortia dynamics. The proposed model, based on Activated Sludge Model (ASM1), included anaerobic ammonium oxidation (anammox), nitrifying and heterotrophic denitrifying bacteria which can attach and grow on granular activated carbon (GAC) particles. Two kinetic descriptions for the model were proposed: with and without soluble microbial products (SMP) and extracellular polymeric substance (EPS). The model accuracy was checked using recorded total inorganic nitrogen concentrations in the effluent and estimated relative abundance of active bacteria using quantitative fluorescence in-situ hybridization (qFISH). Results suggested that the model with EPS kinetics fits better for the relative abundance of anammox bacteria and nitrifying bacteria compared to the model without EPS. The model with EPS and SMP confirms that the growth and existence of heterotrophs in anammox biofilm systems slightly increased due to including the kinetics of SMP production in the model. During the one-year simulation period, the fractions of autotrophs and EPS in the biomass were almost stable but the fraction of heterotrophs decreased which is correlated with the reduction in nitrogen surface loading on the biofilm.

scholarly journals Coupled anaerobic ammonium oxidation and hydrogenotrophic denitrification for simultaneous NH4-N and NO3-N removal

2018 ◽  
Vol 79 (5) ◽  
pp. 975-984 ◽  
Author(s):  
Tatsuru Kamei ◽  
Rawintra Eamrat ◽  
Kenta Shinoda ◽  
Yasuhiro Tanaka ◽  
Futaba Kazama
Keyword(s):  
Nitrogen Removal ◽  
Inorganic Nitrogen ◽  
Nitrate Removal ◽  
Fixed Bed ◽  
Anaerobic Ammonium Oxidation ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
N Removal ◽  
Anammox Process

Abstract Nitrate removal during anaerobic ammonium oxidation (anammox) treatment is a concern for optimization of the anammox process. This study demonstrated the applicability and long-term stability of the coupled anammox and hydrogenotrophic denitrification (CAHD) process as an alternative method for nitrate removal. Laboratory-scale fixed bed anammox reactors (FBR) supplied with H2 to support denitrification were operated under two types of synthetic water. The FBRs showed simultaneous NH4-N and NO3-N removal, indicating that the CAHD process can support NO3-N removal during the anammox process. Intermittent H2 supply (e.g. 5 mL/min for a 1-L reactor, 14/6-min on/off cycle) helped maintain the CAHD process without deteriorating its performance under long-term operation and resulted in a nitrogen removal rate of 0.21 kg-N/m3/d and ammonium, nitrate, and dissolved inorganic nitrogen removal efficiencies of 73.4%, 80.4%, and 77%, respectively. The microbial community structure related to the CAHD process was not influenced by changes in influent water quality, and included the anammox bacteria ‘Candidatus Jettenia’ and a Sulfuritalea hydrogenivorans-like species as the dominant bacteria even after long-term reactor operation, suggesting that these bacteria are key to the CAHD process. These results indicate that the CAHD process is a promising method for enhancing the efficiency of anammox process.

scholarly journals Effects of carbon sources, COD/NO2−-N ratios and temperature on the nitrogen removal performance of the simultaneous partial nitrification, anammox and denitrification (SNAD) biofilm

2017 ◽  
Vol 75 (7) ◽  
pp. 1712-1721 ◽  
Author(s):  
Zhaoming Zheng ◽  
Yun Li ◽  
Jun Li ◽  
Yanzhuo Zhang ◽  
Wei Bian ◽  
...  
Keyword(s):  
Carbon Source ◽  
Nitrogen Removal ◽  
Municipal Wastewater ◽  
Inorganic Nitrogen ◽  
Carbon Sources ◽  
Biofilm Reactor ◽  
Partial Nitrification ◽  
Anammox Bacteria ◽  
Coupling Process ◽  
Anammox Activity

The aim of the present work was to evaluate the effects of carbon sources and chemical oxygen demand (COD)/NO2−-N ratios on the anammox–denitrification coupling process of the simultaneous partial nitrification, anammox and denitrification (SNAD) biofilm. Also, the anammox activities of the SNAD biofilm were investigated under different temperature. Kaldnes rings taken from the SNAD biofilm reactor were operated in batch tests to determine the nitrogen removal rates. As a result, with the carbon source of sodium acetate, the appropriate COD/NO2−-N ratios for the anammox–denitrification coupling process were 1 and 2. With the COD/NO2−-N ratios of 1, 2, 3, 4 and 5, the corresponding NO2−-N consumption via anammox was 87.1%, 52.2%, 29.3%, 23.7% and 16.3%, respectively. However, with the carbon source of sodium propionate and glucose, the anammox bacteria was found to perform higher nitrite competitive ability than denitrifiers at the COD/NO2−-N ratio of 5. Also, the SNAD biofilm could perform anammox activity at 15 °C with the nitrogen removal rate of 0.071 kg total inorganic nitrogen per kg volatile suspended solids per day. These results indicated that the SNAD biofilm process might be feasible for the treatment of municipal wastewater at normal temperature.

Autotrophic nitrogen removal at low temperature

2011 ◽  
Vol 63 (6) ◽  
pp. 1282-1288 ◽  
Author(s):  
J. R. Vázquez-Padín ◽  
I. Fernández ◽  
N. Morales ◽  
J. L. Campos ◽  
A. Mosquera-Corral ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Ammonia Oxidation ◽  
Nitrogen Loading ◽  
Anammox Bacteria ◽  
Ammonia Oxidizing Bacteria ◽  
Oxygen Penetration ◽  
Removal Capacity ◽  
Do Concentration ◽  
Canon Process ◽  
Autotrophic Nitrogen Removal

In this work the autotrophic nitrogen removal was carried out at moderately low temperatures using two configurations: a) two-units one comprising a SHARON reactor coupled to an Anammox SBR and b) single-unit one consisting of a granular SBR performing the CANON process. At 20°C the two-units system was limited by the Anammox step and its nitrogen removal capacity was around ten times lower than the CANON system (0.08 g N/(L d) versus 1 g N/(L d)). When the CANON system was operated at 15°C the average removed nitrogen loading rate decreased to 0.2 g N/(L d). The CANON system was operated in order to limit the ammonia oxidation rate to avoid nitrite inhibition of Anammox bacteria. Since both, temperature and dissolved oxygen (DO) concentration regulate ammonia oxidizing bacteria activity, once the temperature of the reactor is decreased the DO concentration must be decreased to avoid the deeper oxygen penetration inside the granule which could cause inhibition of Anammox bacteria by oxygen and/or nitrite.

Nitrogen removal from livestock and poultry breeding wastewaters using a novel sequencing batch biofilm reactor

2010 ◽  
Vol 62 (11) ◽  
pp. 2599-2606 ◽  
Author(s):  
Hong Xiao ◽  
Ping Yang ◽  
Hong Peng ◽  
Yanzong Zhang ◽  
Shihuai Deng ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Heterotrophic Bacteria ◽  
Biofilm Reactor ◽  
N Accumulation ◽  
Sequencing Batch Biofilm Reactor ◽  
Poultry Breeding ◽  
Mode 2 ◽  
Do Concentration ◽  
Nitrification And Denitrification ◽  
Biological Nitrogen

A study was conducted regarding the biological nitrogen removal from the livestock and poultry breeding wastewater (LPBWs) using a novel sequencing batch biofilm reactor (SBBR). Nitrogen removal process was studied under three aeration strategies/modes, referred to as MODE 1, 2, and 3. The results showed that MODE 2 (one operation period: instant fill of LPBWs, 3.0 h aeration, 1.5 h non-aeration, 1.5 h aeration, 1.0 h non-aeration and rapid drain of treated LPBWs) performed the best in nitrogen removal. Under MODE 2, the removal efficiencies were as high as 96.1 and 92.1% for NH3-N and TN, respectively. Simultaneous nitrification and denitrification (SND), as well as shortcut nitrification and denitrification are likely to be the two main mechanisms for the nitrogen removal in this study. Nitrifying bateria were not inhibited by heterotrophic bacteria with C/N ratios ranging from 18.1 to 21.4 and DO concentration of 2.0 mg/l. Alternation between aeration and non-aeration played an important role in NO2−-N accumulation.

Sign in / Sign up

Export Citation Format

Share Document