scholarly journals Fabrication of durable superhydrophobic/oleophilic cotton fabric for highly efficient oil/water separation

2020 ◽  
Author(s):  
M. E. Mohamed ◽  
B. A. Abd-El-Nabey
Keyword(s):  
Cotton Fabric ◽  
Mechanical Stability ◽  
Separation Efficiency ◽  
Silicone Oil ◽  
Absorption Capacity ◽  
Water Contact ◽  
Water Separation ◽  
Coating Method ◽  
Oil Water Separation ◽  
Oil Water

Abstract In the present work, dopamine is self-polymerized on cotton fabric by a simple deep-coating method and followed by modification with an ethanolic solution of palmitic acid: a superhydrophobic/oleophilic cotton fabric was obtained. The as-prepared cotton fabric exhibits a superhydrophobic character with a water contact angle of 157o. The absorption capacity of as-prepared superhydrophobic/oleophilic cotton fabric in n-hexane, petroleum ether, and silicone oil was determined. The results show that silicone oil has the highest absorption capacity while n-hexane has the lowest value. The absorption capacity is nearly constant even after ten cycles, indicating the efficient recyclability of the as-prepared superhydrophobic/oleophilic cotton fabric for oil separation. The as-prepared superhydrophobic/oleophilic cotton fabric shows excellent separation efficiency, high flux rate, and excellent chemical and mechanical stability.

scholarly journals Complex Aerogels Generated from Nano-Polysaccharides and Its Derivatives for Oil–Water Separation

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1593 ◽  
Author(s):  
Hajo Yagoub ◽  
Liping Zhu ◽  
Mahmoud H. M. A. Shibraen ◽  
Ali A. Altam ◽  
Dafaalla M. D. Babiker ◽  
...  
Keyword(s):  
Guar Gum ◽  
Corn Oil ◽  
Cellulose Nanofibers ◽  
Aqueous Media ◽  
Three Dimensional ◽  
Absorption Capacity ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

The complex aerogel generated from nano-polysaccharides, chitin nanocrystals (ChiNC) and TEMPO-oxidized cellulose nanofibers (TCNF), and its derivative cationic guar gum (CGG) is successfully prepared via a facile freeze-drying method with glutaraldehyde (GA) as cross-linkers. The complexation of ChiNC, TCNF, and CGG is shown to be helpful in creating a porous structure in the three-dimensional aerogel, which creates within the aerogel with large pore volume and excellent compressive properties. The ChiNC/TCNF/CGG aerogel is then modified with methyltrichlorosilane (MTCS) to obtain superhydrophobicity/superoleophilicity and used for oil–water separation. The successful modification is demonstrated through FTIR, XPS, and surface wettability studies. A water contact angle of 155° on the aerogel surface and 150° on the surface of the inside part of aerogel are obtained for the MTCS-modified ChiNC/TCNF/CGG aerogel, resulting in its effective absorption of corn oil and organic solvents (toluene, n-hexane, and trichloromethane) from both beneath and at the surface of water with excellent absorption capacity (i.e., 21.9 g/g for trichloromethane). More importantly, the modified aerogel can be used to continuously separate oil from water with the assistance of a vacuum setup and maintains a high absorption capacity after being used for 10 cycles. The as-prepared superhydrophobic/superoleophilic ChiNC/TCNF/CGG aerogel can be used as a promising absorbent material for the removal of oil from aqueous media.

scholarly journals Fabricated of Superhydrophobic Silanized Melamine Sponge with Photochromic Properties for Efficiency Oil/Water Separation

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Peng Hong ◽  
Zhu Liu ◽  
Yang Gao ◽  
Yubin Chen ◽  
Mingxun Zhuang ◽  
...  
Keyword(s):  
Large Scale ◽  
Separation Efficiency ◽  
Low Cost ◽  
Water Repellency ◽  
Dip Coating ◽  
Absorption Capacity ◽  
Photochromic Properties ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

Superhydrophobic sponge as potential absorbing material for oil/water separation is attracting great attention recently. However, there are still some challenges to feasibly fabricate superhydrophobic sponge with large scale and low cost. Herein, a novel photochromic superhydrophobic melamine sponge (PDMS-SP sponge) is fabricated by facilely dip-coating and thermocuring of hydroxyl-terminated polydimethylsiloxanes mixed with photochromic spiropyran. FT-IR, EDS, and XPS results confirm the successful coating of PDMS-SP upon melamine sponge. The resultant sponge not only possesses excellent water repellency with a contact angle of 154.5° and oil-water separation efficiency with an oil absorption capacity of 48–116 folds of itself weight, but also shows photochromic phenomenon between colorless and purple when it is successively exposed to UV irradiation and visible light.

scholarly journals Preparation and Characterization of Tris(trimethylsiloxy)silyl Modified Polyurethane Acrylates and Their Application in Textile Treatment

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1629
Author(s):  
Xuecheng Yu ◽  
Ying Xiong ◽  
Zhen Li ◽  
Hongding Tang
Keyword(s):  
Microphase Separation ◽  
Triethylene Glycol ◽  
Absorption Capacity ◽  
Attenuated Total Reflection ◽  
Water Mixture ◽  
Water Contact ◽  
Water Separation ◽  
Cotton Textiles ◽  
Oil Water Separation ◽  
Oil Water

Three series of silicone modified polyurethane acrylate (SPUA) prepolymers were prepared from dicyclohexylmethane-4, 4′-diisocyanate (HMDI), PPG1000, triethylene glycol (TEG), 2-hydroxyethyl acrylate (HEA), and multi-hydroxyalkyl silicone (MI-III) with tris(trimethylsiloxy)silyl propyl side groups. Their structures were confirmed by 1H NMR, 13C NMR, and Fourier transformed infrared (FTIR) analysis, and SPUA films were obtained by UV curing. The properties of films were investigated by attenuated total reflection (ATR)-FTIR, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), water contact angle (WCA), thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), water and hexane resistance, and tensile testing. The results showed that the structures and dosages of MI-III could influence the polymerization properties, surface properties, water and n-hexane resistance, and thermal and tensile properties of SPUA. For instance, the surface aggregation of tris(trimethylsiloxy)silyl propyl groups (even ~2.5 wt%) could endow SPUA films with less microphase separation, good hydrophobicity, lipophilicity, thermal stability, and mechanical properties. Interestingly, obvious regular winkles appeared on the surfaces of SPUAIII films, which are characterized by relatively high WCA values. However, relatively smooth were observed on the surfaces of SPUAIII films, which also exhibit lower water absorption ratio values. Furthermore, the ordinary cotton textiles would be transformed into hydrophobic and oleophilic textiles after treating with SPUA simply, and they were used in the oil/water separation study. Among them, consistent with water and hexane resistance analysis of SPUA films, SPUAII treated cotton textiles are characterized by relatively small liquid absorption capacity (LAC) values. Thus, phenyl groups and side-chain tris(trimethylsiloxy)silyl propyl groups are helpful to improve the hydrophobicity and lipophilicity of SPUA films. SPUAII-5 (even with 5 wt% MII) treated cotton textiles could efficiently separate the oil/water mixture, such as n-hexane, cyclohexane, or methylbenzene with water. Thus, this material has great potential in the application of hydrophobic treatment, oil/water separation, and industrial sewage emissions, among others.

scholarly journals Facile Fabrication of Magnetic, Durable and Superhydrophobic Cotton for Efficient Oil/Water Separation

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 442 ◽  
Author(s):  
Mingguang Yu ◽  
Qing Wang ◽  
Wenxin Yang ◽  
Yonghang Xu ◽  
Min Zhang ◽  
...  
Keyword(s):  
Separation Efficiency ◽  
Water Repellency ◽  
Cotton Fabrics ◽  
Ammonia Solution ◽  
Hot Water ◽  
Water Contact ◽  
Water Separation ◽  
Efficient Strategy ◽  
Oil Water Separation ◽  
Oil Water

In this paper, we present a facile and efficient strategy for the fabrication of magnetic, durable, and superhydrophobic cotton for oil/water separation. The superhydrophobic cotton functionalized with Fe3O4 magnetic nanoparticles was prepared via the in situ coprecipitation of Fe2+/Fe3+ ions under ammonia solution on cotton fabrics using polyvinylpyrrolidone (PVP) as a coupling agent and hydrophobic treatment with tridecafluorooctyl triethoxysilane (FAS) in sequence. The as-prepared cotton demonstrated excellent superhydrophobicity with a water contact angle of 155.6° ± 1.2° and good magnetic responsiveness. Under the control of the external magnetic field, the cotton fabrics could be easily controlled to absorb the oil from water as oil absorbents, showing high oil/water separation efficiency, even in hot water. Moreover, the cotton demonstrated remarkable mechanical durable properties, being strongly friction-resistant against sandpaper and finger wipe, while maintaining its water repellency. This study developed a novel and efficient strategy for the construction of magnetic, durable, and superhydrophobic biomass-based adsorbent for oil/water separation, which can be easily scaled up for practical oil absorption.

scholarly journals A Robust Superhydrophobic Polyurethane Sponge Loaded with Multi-Walled Carbon Nanotubes for Efficient and Selective Oil-Water Separation

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3344
Author(s):  
De Liu ◽  
Shiying Wang ◽  
Tao Wu ◽  
Yujiang Li
Keyword(s):  
Ionic Strength ◽  
Absorptive Capacity ◽  
Large Scale ◽  
Low Cost ◽  
Absorption Capacity ◽  
Effect Of Temperature ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

The influence of different coupling agents and coupling times on the wettability of a polyurethane (PU) sponge surface were optimized. Octadecyltrichlorosilane (OTS) was selected as the optimal coupling agent to prepare the superhydrophobic sponge. The superhydrophobic sponge was prepared in one step, which has the advantages of simple operation and enhanced durability. The superhydrophobic sponge was characterized by scanning electron microscopy, Teclis Tracker tensiometry, and Fourier transform infrared (FT-IR) spectrophotometry. The water contact angle increased from 64.1° to 151.3°, exhibiting ideal superhydrophobicity. Oils and organic solvents with different viscosities and densities can be rapidly and selectively absorbed by superhydrophobic sponges, with an absorption capacity of 14.99 to 86.53 times the weight of the sponge itself, without absorbing any water. Since temperature affects the viscosity and ionic strength of oil, and influences the surface wettability of the sponges, the effect of temperature and ionic strength on the oil absorption capacity of the superhydrophobic sponges was measured, and its mechanism was elucidated. The results showed that the absorptive capacity retained more than 90% of the initial absorptive capacity after repeated use for 10 times. Low-cost, durable superhydrophobic sponges show great potential for large-scale oil-water separation.

scholarly journals Analysis of Superhydrophobic-Superoleophilic Properties on Modification of Polyurethane Sponge for Selective Oil-Water Separation

2021 ◽  
Vol 4 (1) ◽  
pp. 52-62
Author(s):  
Niken Aprilia Eka Putri ◽  
Arif Tjahjono ◽  
Perdamean Sebayang
Keyword(s):  
Separation Efficiency ◽  
Average Pore Size ◽  
Dip Coating ◽  
Absorption Capacity ◽  
Average Pore ◽  
Water Contact ◽  
Water Separation ◽  
Coating Methods ◽  
Oil Water Separation ◽  
Polyurethane Sponge

In this research, a modification of polyurethane (PU) sponge material has been made to obtain superhydrophobic-superoleophilic properties. The PU sponge was coated with several nanomaterials such as ZnO, Fe3O4+TEOS, and stearic acid by dip-coating and drop-coating methods. The tests include selective separation of oil and water with a magnetic response. Several types of oil and organic solvents were tested for absorption capacity. The results showed that the PU@ZnO@Fe3O4@SA sponge has a good absorption capacity, from 4.37 mL to 7.37 mL. The fabricated PU sponge could selectively separate oil from water with a separation efficiency above 99%. The fabricated PU sponge also could be magnetically driven by external magnetic fields. From the characterization using 3D OM, the water contact angle was 153.38°, which indicates that the PU@ZnO@Fe3O4@SA sponge is superhydrophobic. And from surface morphology obtained an average pore size diameter of 167.475 μm.

scholarly journals Highly Hydrophobic Cotton Fabrics Modified by Poly(methylhydrogen)siloxane and Fluorinated Olefin: Characterization and Applications

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 833
Author(s):  
Huiping Lin ◽  
Qingjian Hu ◽  
Tianyu Liao ◽  
Xinxiang Zhang ◽  
Wenbin Yang ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
Separation Efficiency ◽  
Cotton Fabrics ◽  
Water Contact ◽  
Water Separation ◽  
Oh Groups ◽  
Chemical Structures ◽  
Stain Resistance ◽  
Oil Water Separation ◽  
Highly Hydrophobic

Highly hydrophobic cotton fabrics were obtained with poly(methylhydrogen)siloxane (PMHS) and a further fluorinated olefin modification. The chemical structures and microstructures of PMHS-modified cotton fabrics were characterized, and application of the resultant cotton fabrics in stain resistance and oil–water separation was demonstrated. PMHS chains with very low surface energy were grafted onto cotton fabric by the dehydrogenation reaction between –Si–H of PMHS and –OH groups of cotton fabric at room temperature. The water contact angle of PMHS-modified cotton fabric was 141.7°, which provided the modified cotton fabric with good stain resistance to waterborne pollutants. The separation efficiency of diesel from water was higher than 92% for 20 repeatable separation cycles. A further improvement in stain resistance to oil was also demonstrated by a further addition reaction of 1H,1H,2H-perfluoro-1-decene with PMHS-modified cotton fabric.

Fabrication of zirconia based durable superhydrophobic–superoleophilic fabrics using non fluorinated materials for oil–water separation and water purification

RSC Advances ◽  
2016 ◽  
Vol 6 (105) ◽  
pp. 103632-103640 ◽  
Author(s):  
Arun K. Singh ◽  
Jayant K. Singh
Keyword(s):  
Water Purification ◽  
Separation Efficiency ◽  
Dip Coating ◽  
Superhydrophobic Coating ◽  
Water Separation ◽  
Coated Fabric ◽  
Coating Method ◽  
Oil Water Separation ◽  
Oil Water ◽  
Dip Coating Method

Fluorine free superhydrophobic coating on cotton fabric by inexpensive dip coating method. The coated fabric exhibited high oil–water separation efficiency.

Facile fabrication of superhydrophobic filter paper with improved durability and water repellency

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Lizheng Sha ◽  
Chao Ma ◽  
Huifang Zhao ◽  
Supeng Qiu ◽  
Zhongyu Yan ◽  
...  
Keyword(s):  
Filter Paper ◽  
Separation Efficiency ◽  
Cellulose Nanofibrils ◽  
Water Repellency ◽  
Step Method ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water ◽  
Self Cleaning

Abstract Superhydrophobic surfaces have high potential in self-cleaning and oil-water separation applications. We developed a three-step method for the preparation of superhydrophobic filter paper. It involved citric acid (CA) pretreatment to activate cellulose fibers, coating with cellulose nanofibrils/functionalized silica (CNFs/m-SiO2) slurry to increase surface roughness, and grafting of hexadecyltrimethoxysilane (HDTMS) to enhance water resistance. The water contact angle (WCA) and siding angle (SA) of the prepared filter paper reached 151.5° and 7.5°, respectively. The results showed that, compared to the coated filter paper without the added CNFs, the coated paper with CNFs had higher retention of m-SiO2, thus roughness required for superhydrophobic surface was achieved. Further test under frequent abrasion and acid or alkali conditions showed that CA pretreatment improved the durability of superhydrophobic filter paper due to chemical crosslinking between the modified substrate and m-SiO2. Besides, the prepared superhydrophobic filter paper had outstanding self-cleaning property and high oil-water separation efficiency for various oil-water mixtures. Therefore, it is expected to be used for the treatment of oily wastewater.

scholarly journals Preparation and Application of Superhydrophobic Copper Mesh by Chemical Etching and In-situ Growth

2021 ◽  
Vol 9 ◽  
Author(s):  
Qilei Tong ◽  
Zhenzhong Fan ◽  
Biao Wang ◽  
Qingwang Liu ◽  
Yunhe Bo ◽  
...  
Keyword(s):  
Contact Angle ◽  
Chemical Etching ◽  
Separation Efficiency ◽  
Water Mixture ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water ◽  
Copper Mesh

Oily sewage and floating oil in the ocean post a huge threat to the ecological environment, therefore, developing an efficient separation for oil/water mixtures is an urgent need. Currently, superhydrophobic materials exhibit excellent oil/water separation ability. In this study, a superhydrophobic copper mesh prepared by the chemical etching method and the in-situ growth method and the performance evaluation are introduced. The oxide layer on the surface of the copper mesh is first removed by pickling, and then immersed in FeCl3 solution for chemical etching to make the surface rough, stearic acid (SA) is used for in-situ growth to reduce the surface energy, a superhydrophobic oil-water separation copper mesh is obtained. The water contact angle (WCA) of the copper mesh is more than 160°. The copper mesh is chemically stable and can effectively adsorb floating oil and separate the oil-water mixture. After several oil-water separation experiments, the oil-water separation efficiency can still be above 98%. The effects of the concentration of FeCl3 and SA on the contact angle and oil-water separation efficiency are investigated, the results show that when the concentration of FeCl3 is 2% and SA is 1.5%, the WCA and oil-water separation efficiency are the largest. The research used a simple and environmentally friendly method to prepare the oil-water separation copper mesh, which has important application significance for water quality restoration.

Sign in / Sign up

Export Citation Format

Share Document