scholarly journals TECHNICAL PEER REVIEW REPORT - YUCCA MOUNTAIN: WASTE PACKAGE CLOSURE CONTROL SYSTEM

2005 ◽  
Author(s):  
NA
Keyword(s):  
Control System ◽  
Peer Review ◽  
Yucca Mountain ◽  
Waste Package

Peer Review of the Waste Package Material Performance Interim Report

2001 ◽  
Author(s):  
J. A. Beavers ◽  
Jr. T. M. Devine ◽  
G. S. Frankel ◽  
R. H. Jones ◽  
R. G. Kelly ◽  
...  
Keyword(s):  
Peer Review ◽  
Interim Report ◽  
Waste Package

scholarly journals YUCCA MOUNTAIN WASTE PACKAGE CLOSURE SYSTEM

2005 ◽  
Author(s):  
G. Housley ◽  
C. Shelton-davis ◽  
K. Skinner
Keyword(s):  
Yucca Mountain ◽  
Closure System ◽  
Waste Package

scholarly journals Evaluation of the Corrosivity of Dust Deposited on Waste Packages at Yucca Mountain, Nevada

2006 ◽  
Vol 932 ◽  
Author(s):  
Charles Bryan ◽  
Russell Jarek ◽  
Thomas Wolery ◽  
David Shields ◽  
Mark Sutton ◽  
...  
Keyword(s):  
Corrosion Product ◽  
Experimental Studies ◽  
Yucca Mountain ◽  
Localized Corrosion ◽  
Small Droplet ◽  
Waste Package ◽  
Physical Isolation ◽  
Salt Minerals ◽  
Dry Out ◽  
Diffusive Gradients

ABSTRACTPotentially corrosive brines can form during post-closure by deliquescence of salt minerals in dust deposited on the surface of waste packages at Yucca Mountain during operations and the pre-closure ventilation period. Although thermodynamic modeling and experimental studies of brine deliquescence indicates that brines are likely to form, they will be nitrate-rich and noncorrosive. Processes that modify the brines following deliquescence are beneficial with respect to inhibition of corrosion. For example, acid degassing (HCl, HNO3) could dry out brines, but kinetic limitations are likely to limit the effect to increasing their passivity by raising the pH and increasing the NO3/Cl ratio.Predicted dust quantities and maximum brine volumes on the waste package surface are small, and physical isolation of salt minerals in the dust may inhibit formation of eutectic brines and decrease brine volumes. If brines do contact the WP surface, small droplet volumes and layer thicknesses do not support development of diffusive gradients necessary for formation on separate anodic-cathodic zones required for localized corrosion. Finally, should localized corrosion initiate, corrosion product buildup will stifle corrosion, by limiting oxygen access to the metal surface, by capillary retention of brine in corrosion product porosity, or by consumption of brine components (Cl−).

Design by Analysis of Waste Packages at Yucca Mountain for Impact Loads

2009 ◽  
Author(s):  
Randy J. James ◽  
Kenneth Jaquay ◽  
Michael J. Anderson
Keyword(s):  
Nuclear Waste ◽  
Impact Loading ◽  
Structural Integrity ◽  
Structural Response ◽  
Yucca Mountain ◽  
Impact Loads ◽  
Geologic Repository ◽  
Dynamic Simulations ◽  
Nuclear Waste Storage ◽  
Waste Package

The proposed geologic repository under development at Yucca Mountain, Nevada, will employ multiple shell metallic containers (waste packages) for the disposal of nuclear waste. The waste packages represent a primary engineered barrier for protection and containment of the radioactive waste, and the design of these containers must consider a variety of structural conditions to insure structural integrity. Some of the more challenging conditions for structural integrity involve severe impact loading due to hypothesized event sequences, such as drops or collisions during transport and placement. Due to interactions between the various components leading to complex structural response during an impact sequence, nonlinear explicit dynamic simulations and highly refined models are employed to qualify the design for these severe impact loads. This paper summarizes the Design by Analysis methodologies employed for qualification of waste package design under impact loading and provides several illustrative examples using these methods. Example evaluations include a collision of a waste package by the Transport and Emplacement Vehicle (TEV) and two scenarios due to seismic events, including WP impact within the TEV and impact by falling rock. The examples are intended to illustrate the stringent Design by Analysis methods employed and also highlight the scope of structural conditions included in the design basis for waste packages to be used for proposed nuclear waste storage at Yucca Mountain.

Thermal-Hydrologic Model Study for an Alternative Waste Package Design for Yucca Mountain Repository

2006 ◽  
Vol 154 (2) ◽  
pp. 247-264 ◽  
Author(s):  
D. Bahrami ◽  
G. Danko
Keyword(s):  
Yucca Mountain ◽  
Hydrologic Model ◽  
Package Design ◽  
Waste Package ◽  
Model Study

Evaluation of The Long-Term Stability of Passive Corrosion On The Drip Shield and Waste Package Under Yucca Mountain Conditions

2002 ◽  
Vol 713 ◽  
Author(s):  
D.W. Shoesmith
Keyword(s):  
Environmental Conditions ◽  
Yucca Mountain ◽  
Localized Corrosion ◽  
Waste Package ◽  
Long Term Stability ◽  
Alloy 22 ◽  
Aqueous Environments ◽  
Engineered Barriers ◽  
Titanium Grade

ABSTRACTPossible long term corrosion scenarios for the engineered barriers proposed for the Yucca Mountain (Nevada, USA) repository are reviewed.Introduction:The materials proposed for the engineered barriers in the Yucca Mountain repository (Nevada, USA), Alloy-22 for the waste packages (WP) and titanium Grade-7 (Ti-7) for the drip shield (DS), appear unlikely to suffer localized corrosion (LC) and have very low passive corrosion (PC) rates (1–3). Since environmental conditions will become more benign as temperatures decline and aqueous environments become more dilute (4), this leads to the prediction of exceedingly long waste package lifetimes. In this review, possible corrosion scenarios are discussed in the context of the anticipated evolution in the repository environment.

Evolution of Chemistry and Its Effects on the Corrosion of Engineered Barrier Materials

2006 ◽  
Vol 985 ◽  
Author(s):  
Darrell Dunn ◽  
Yi-Ming Pan ◽  
Xihua He ◽  
Lietai Yang ◽  
Roberto Pabalan
Keyword(s):  
Environmental Conditions ◽  
Environmental Influence ◽  
Near Field ◽  
Yucca Mountain ◽  
High Level Waste ◽  
Seepage Water ◽  
Waste Package ◽  
Barrier Materials ◽  
Engineered Barrier ◽  
High Level

ABSTRACTThe evolution of environmental conditions within the emplacement drifts of a potential high-level waste repository at Yucca Mountain, Nevada, may be influenced by several factors, including the temperature and relative humidity within the emplacement drifts and the composition of seepage water. The performance of the waste package and the drip shield may be affected by the evolution of the environmental conditions within the emplacement drifts. In this study, tests evaluated the evolution of environmental conditions on the waste package surfaces and in the surrounding host rock. The tests were designed to (i) simulate the conditions expected within the emplacement drifts; (ii) measure the changes in near-field chemistry; and (iii) determine environmental influence on the performance of the engineered barrier materials. Results of tests conducted in this study indicate the composition of salt deposits was consistent with the initial dilute water chemistry. Salts and possibly concentrated calcium chloride brines may be more aggressive than either neutral or alkaline brines.

Sign in / Sign up

Export Citation Format

Share Document