In Vitro and In Vivo Performance of Novel Spray Dried Andrographolide Loaded Scleroglucan Based Formulation for Dry Powder Inhaler

2017 ◽  
Vol 14 (7) ◽  
Author(s):  
Ashwin Jagannath Mali ◽  
Chellampillai Bothiraja ◽  
Ravindra Nandlal Purohit ◽  
Atmaram Pandurang Pawar
Antioxidants ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 427
Author(s):  
Priya Muralidharan ◽  
Maria F. Acosta ◽  
Alexan I. Gomez ◽  
Carissa Grijalva ◽  
Haiyang Tang ◽  
...  

This is the first study reporting on the design and development innovative inhaled formulations of the novel natural product antioxidant therapeutic, tetramethylpyrazine (TMP), also known as ligustrazine. TMP is obtained from Chinese herbs belonging to the class of Ligusticum. It is known to have antioxidant properties. It can act as a Nrf2/ARE activator and a Rho/ROCK inhibitor. The present study reports for the first time on the comprehensive characterization of raw TMP (non-spray dried) and spray dried TMP in a systematic manner using thermal analysis, electron microscopy, optical microscopy, and Raman spectroscopy. The in vitro aerosol dispersion performance of spray dried TMP was tested using three different FDA-approved unit-dose capsule-based human dry powder inhaler devices. In vitro human cellular studies were conducted on pulmonary cells from different regions of the human lung to examine the biocompatibility and non-cytotoxicity of TMP. Furthermore, the efficacy of inhaled TMP as both liquid and dry powder inhalation aerosols was tested in vivo using the monocrotaline (MCT)-induced PH rat model.


2006 ◽  
Vol 6 (9) ◽  
pp. 3001-3009 ◽  
Author(s):  
Mahavir Bhupal Chougule ◽  
Bijay Kumar Padhi ◽  
Ambikanandan Misra

The purpose of this study was to encapsulate Amiloride Hydrochloride into nano-liposomes, incorporate it into dry powder inhaler, and to provide prolonged effective concentration in airways to enhance mucociliary clearance and prevent secondary infection in cystic fibrosis. Liposomes were prepared by thin film hydration technique and then dispersion was passed through high pressure homogenizer to achieve size of nanometer range. Nano-liposomes were separated by centrifugation and were characterized. They were dispersed in phosphate buffer saline pH 7.4 containing carriers (lactose/sucrose/mannitol), and glycine as anti-adherent. The resultant dispersion was spray dried. The spray dried powders were characterized and in vitro drug release studies were performed using phosphate buffer saline pH 7.4. in vitro and in vivo drug pulmonary deposition was carried out using Andersen Cascade Impactor and by estimating drug in bronchial alveolar lavage and lung homogenate after intratracheal instillation in rats respectively. Nano-liposomes were found to have mean volume diameter of 198 ± 15 nm, and 57% ± 1.9% of drug entrapment. Mannitol based formulation was found to have low density, good flowability, particle size of 6.7 ± 0.6 μm determined by Malvern MasterSizer, maximum fine particle fraction of 67.6 ± 0.6%, mean mass aerodynamic diameter 2.3 ± 0.1 μm, and geometric standard deviation 2.4 ± 0.1. Developed formulations were found to have prolonged drug release following Higuchi's Controlled Release model and in vivo studies showed maximal retention time of drug of 12 hrs within the lungs and slow clearance from the lungs. This study provides a practical approach for direct lung delivery of Amiloride Hydrochloride encapsulated in liposomes for controlled and prolonged retention at the site of action from dry powder inhaler. It can provide a promising alternative to the presently available nebulizers in terms of prolonged pharmacological effect, reducing systemic side effects such as potassium retention due to rapid clearance of the drug from lungs in patients suffering from cystic fibrosis.


Pharmaceutics ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 297
Author(s):  
Joana T. Pinto ◽  
Inês Cachola ◽  
João F. Pinto ◽  
Amrit Paudel

The use of physiologically based pharmacokinetic (PBPK) models to support drug product development has become increasingly popular. The in vitro characterization of the materials of the formulation provides valuable descriptors for the in silico prediction of the drug’s pharmacokinetic profile. Thus, the application of an in vitro–in silico framework can be decisive towards the prediction of the in vivo performance of a new medicine. By applying such an approach, this work aimed to derive mechanistic based insights into the potential impact of carrier particles and powder bulk properties on the in vivo performance of a lactose-based dry powder inhaler (DPI). For this, a PBPK model was developed using salbutamol sulphate (SS) as a model drug and the in vitro performance of its low-dose blends (2% w/w) with different types of lactose particles was investigated using different DPI types (capsule versus reservoir) at distinct airflows. Likewise, the influence of various carrier’s particle and bulk properties, device type and airflow were investigated in silico. Results showed that for the capsule-based device, low-dose blends of SS had a better performance, when smaller carrier particles (Dv0.5 ≈ 50 μm) with about 10% of fines were used. This resulted in a better predicted bioavailability of the drug for all the tested airflows. For the reservoir type DPI, the mean particle size (Dv0.5) was identified as the critical parameter impacting performance. Shear cell and air permeability or compressibility measurements, particle size distribution by pressure titration and the tensile strength of the selected lactose carrier powders were found useful to generate descriptors that could anticipate the potential in vivo performance of the tested DPI blends.


2017 ◽  
Vol 4 (1) ◽  
pp. 30-40 ◽  
Author(s):  
Sujit K. Debnath ◽  
Saisivam Srinivasan ◽  
Monalisha Debnath

Objective:The objective of the present work was to formulate Prothionamide (PTH) nanoparticles using Poly lactic co-glycolic acid (PLGA), optimized by Box-Behnken Design and further modification to dry powder inhaler followed byin-vivostudy.Methods:Poly-lactic co-gycolic acid (PLGA), a biodegradable polymer was used to coat Prothionamide by solvent evaporation technique. Formulation was optimized using Box-Behnken Design. Response surface curve and desirability factors helped in the selection of optimum formulation of PTH nanoparticles. Dry powder inhaler was prepared by adding inhalable grade lactose to optimize PTH nanoparticles. Mass median aerodynamic diameter (MMAD) was carried out using Andersen Cascade Impactor (ACI) to demonstrate its suitability in the pulmonary administration.In-vitrodrug release of dry powder inhaler was carried out in simulated lungs fluid. Correlationin-vitrotoin-vivowas established after performing animal experiment.Results:FTIR study reveals no chemical interaction between PTH, lactose and PLGA as the principle peaks was retained with same intensity in the physical mixture. Scanning electron microscope showed the spherical shape and aerodynamic particle size was found to be 1.69µm. Drug release study showed initial burst release followed by zero order release.In-vivomodel confirmed the presence of PTH after 24h. Aerodynamic particle size and the release profile revealed the suitability of PTH loaded nanoparticles containing dry powder inhaler for the pulmonary administration.Conclusion:Prepared DPI containing PTH nanoparticles can improve in the management of tuberculosis by increasing PTH residency in the lungs tissue for prolong period of time.


2019 ◽  
Vol 9 (2) ◽  
pp. 255-261 ◽  
Author(s):  
Farideh Shiehzadeh ◽  
Mohsen Tafaghodi ◽  
Majid Laal-Dehghani ◽  
Faezeh Mashhoori ◽  
Bibi Sedigheh Fazly Bazzaz ◽  
...  

Purpose: Direct delivery of aminoglycosides to the lungs was under extensive evaluations during the last decades. Because of large particle size, low density and porous structure, large porous particles (LPPs) are versatile carriers for this purpose. In this study, poly (lactic-co-glycolic acid) (PLGA) LPPs encapsulating gentamicin sulfate were prepared and in vitro characteristics of their freeze-dried powder as a dry powder inhaler (DPI) were evaluated. Methods: To prepare PLGA LPPs, a double emulsification-solvent evaporation method was optimized and gentamicin sulfate was post-loaded in the LPPs. In vitro characteristics including morphological features, thermal behavior, aerodynamic profile and cumulative drug release were evaluated by the scanning electron microscope (SEM), differential scanning calorimetry (DSC), next-generation cascade impactor (NGI) and Franz diffusion cell respectively. Results: The obtained results revealed that the preparation method was capable to produce spherical large homogenous highly porous particles. 94% of gentamicin sulfate released from LPPs up to 30 minutes. Mass median aerodynamic diameter (MMAD) and fine particle fraction (FPF) were 4.9 µm and 39% respectively. Conclusion: In this study, dry powder formulation composed of PLGA LPPs encapsulating gentamicin sulfate showed a promising in vitro behavior as a pulmonary delivery carrier. Improvements on the aerodynamic behavior and in vivo evaluations recommended for further developments.


Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1002
Author(s):  
Sawittree Sahakijpijarn ◽  
Chaeho Moon ◽  
John J. Koleng ◽  
Dale J. Christensen ◽  
Robert O. Williams

Remdesivir exhibits in vitro activity against SARS-CoV-2 and was granted approval for emergency use. To maximize delivery to the lungs, we formulated remdesivir as a dry powder for inhalation using thin film freezing (TFF). TFF produces brittle matrix nanostructured aggregates that are sheared into respirable low-density microparticles upon aerosolization from a passive dry powder inhaler. In vitro aerodynamic testing demonstrated that drug loading and excipient type affected the aerosol performance of remdesivir. Remdesivir combined with optimal excipients exhibited desirable aerosol performance (up to 93.0% FPF< 5 µm; 0.82 µm mass median aerodynamic diameter). Remdesivir was amorphous after the TFF process, which benefitted drug dissolution in simulated lung fluid. TFF remdesivir formulations are stable after one month of storage at 25 °C/60% relative humidity. An in vivo pharmacokinetic evaluation showed that TFF remdesivir–leucine was poorly absorbed into systemic circulation while TFF remdesivir-Captisol® demonstrated increased systemic uptake compared to leucine. Remdesivir was hydrolyzed to the nucleoside analog GS-441524 in the lung, and levels of GS-441524 were greater in the lung with leucine formulation compared to Captisol®. In conclusion, TFF technology produces high-potency remdesivir dry powder formulations for inhalation that are suitable to treat patients with COVID-19 on an outpatient basis and earlier in the disease course where effective antiviral therapy can reduce related morbidity and mortality.


Sign in / Sign up

Export Citation Format

Share Document