scholarly journals Incidental Findings in Temporomandibular Joint Region Detected by Cone-beam Computed Tomography: A Retrospective Study

2020 ◽  
Vol 14 (1) ◽  
pp. 337-342
Author(s):  
Mojdeh Mehdizadeh ◽  
Zahra Rezaei ◽  
Farida Ghazanfari Moghadam
Keyword(s):  
Computed Tomography ◽  
Soft Tissue ◽  
Temporomandibular Joint ◽  
Cone Beam Computed Tomography ◽  
Incidental Findings ◽  
Cone Beam ◽  
Soft Tissue Calcification ◽  
Articular Eminence ◽  
Tissue Calcification ◽  
Significant Difference

Purpose: The purpose of this study was to investigate the prevalence of Incidental Findings (IFs) in the temporomandibular joint (TMJ) region detected in Cone-Beam Computed Tomography (CBCT) scans of maxilla and mandible. Materials and Methods: In this study, 384 CBCT scans were reviewed for IFs of the TMJ region. Demographic data including age and sex were recorded. The scans were evaluated in multiplanar views: corrected sagittal, corrected coronal and axial sections. IFs in TMJ region were categorized into eight groups: osteoarthritis, flattening and erosion of condyle and articular eminence, osteophytes, subchondral pseudocyst, condyle hyperplasia, condyle hypoplasia, bifid condyle, and soft tissue calcification. Statistical analyses were performed using the SPSS statistic v.22. Results: From the CBCT scans, a total of 81 (21.1%) IFs were identified. 184 of the subjects (47.9%) were male and 200 (52.1%) were females. Their age ranged from 10 to 75 years old with a mean of 36.8 and a standard deviation of 13.9 years. The most frequent IFs were flattening and erosion of condyle and articular eminence (40.74%), followed by soft tissue calcification (30.86%). Osteoarthritis was not observed in any of the subjects. There was no significant difference between females and males in IFs of TMJ joint and its related structures. Flattening and erosion of condyle and articular eminence, soft tissue calcification, osteophytes and, subchondral pseudo cyst showed significant differences between individuals of different age ranges. Conclusion: While examining CBCT images, it is critical to check for evidence of IFs in the TMJ region. The findings of this study emphasize the value of a thorough examination of all areas visualized on CBCT scans even those beyond the region of interest.

scholarly journals Temporomandibular Joint Osseous Morphology of Class I and Class II Malocclusions in the Normal Skeletal Pattern: A Cone-Beam Computed Tomography Study

Diagnostics ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 541
Author(s):  
Xiao-Chuan Fan ◽  
Lin-Sha Ma ◽  
Li Chen ◽  
Diwakar Singh ◽  
Xiaohui Rausch-Fan ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Glenoid Fossa ◽  
Linear Measurements ◽  
Significant Difference ◽  
Skeletal Pattern

(1) Background—The aim of the present study was to evaluate the correlation between the temporomandibular joint (TMJ) osseous morphology of normal skeletal pattern individuals with different dental malocclusions by using cone-beam computed tomography (CBCT). (2) Methods—The CBCT images of bilateral TMJs in 67 subjects with skeletal class I and average mandibular angle (26 males and 41 females, age range 20–49 years) were evaluated in this study. The subjects were divided into class I, class II division 1, and class II division 2 according to the molar relationship and retroclination of the maxillary incisors. Angular and linear measurements of TMJ were evaluated and the differences between the groups were statistically analyzed. (3) Results—Intragroup comparisons showed statistical differences for articular eminence inclination, the width of the glenoid fossa, the ratio of the width of the glenoid fossa to the depth of the glenoid fossa, the condylar angle, and the intercondylar angle between the malocclusion groups. The measurements of the glenoid fossa shape showed no significant difference between the left and right sides. Females showed more differences in the morphological parameters of TMJ between the three malocclusion groups than the males. (4) Conclusion—The present study revealed differences in the TMJ osseous morphology between dental class I and class II malocclusions in the normal skeletal pattern.

scholarly journals Digital image filters are not necessarily related to improvement in diagnostic of degenerative bone changes in the temporomandibular joint on cone beam computed tomography

2021 ◽  
Vol 10 (4) ◽  
pp. e44010414296
Author(s):  
Lauhélia Mauriz Marques ◽  
André Luiz Ferreira Costa ◽  
Fernando Martins Baeder ◽  
Paola Fernanda Leal Corazza ◽  
Daniel Furtado Silva ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Digital Image ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Significant Difference ◽  
Bone Sclerosis ◽  
Bone Changes ◽  
Image Filters

This study assessed whether the use of digital image filters influences the detection of temporomandibular joint (TMJ) bone changes on cone beam computed tomography (CBCT). Two radiologists evaluated the TMJ images of CBCT scans to verify the presence of osteophytes, erosions, pseudocysts, bone sclerosis and flattening, using the software XoranCAT®; each image of the TMJ was assessed with and without the use of the following filters: Angio Sharpen 3x3 and Angio Sharpen 5x5. Kruskal-Wallis’ test was used to assess whether the application of filters influenced the scores assigned to the degenerative bone changes in the condyle. Flattening was present in 15 cases (51.72%), followed by osteophytes in six cases (20.69%), sclerosis in three cases (10.34%), and erosion in three cases (10.34%), with pseudocyst found in two cases (6.90%). No statistically significant difference was found in the scores (P = 0.786) regarding the original images and those treated with both filters. Digital image filters used in our study did not influence the diagnosis of degenerative bone changes in the TMJ on CBCT images.

scholarly journals Evaluation of temporomandibular joint disorders using cone beam computed tomography

2017 ◽  
Vol 3 (4) ◽  
pp. 698
Author(s):  
Sonam Kohli ◽  
Rahul Krishan Sharma ◽  
Anchal Goel ◽  
M. K. Sunil
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cone Beam Computed Tomography ◽  
Joint Space ◽  
Temporomandibular Joint Disorders ◽  
Cone Beam ◽  
Glenoid Fossa ◽  
Significant Difference ◽  
Mandibular Fossa ◽  
Osseous Changes

<p class="abstract"><strong>Background:</strong> <span lang="EN-IN">The aim of this study was to evaluate efficacy of segmental cone beam computed tomography (CBCT) in detecting bony changes in condyle and thickness of roof of glenoid fossa in temporomandibular joint (TMJ) disorders.</span></p><p class="abstract"><strong>Methods:</strong> The study group comprised of 10 temporomandibular disorders (TMD) patients of either sex between the age group of 20-60 years diagnosed as TMDs by clinical evaluation using the research diagnostic criteria was considered. After the clinical examination, radiographic investigations were carried out which included digital OPG, transcranial radiograph and CBCT scan. TMJ Evaluation included: (a) bony changes of the condyle (flattening, erosion, sclerosis, osteophytes, resorption); (b) joint space (normal, increased, reduced, bony contact between the condyle and the mandibular fossa); and (c) bony changes of mandibular fossa (normal, sclerosis, erosion, resorption). The radiographic findings were statistically analysed.<strong></strong></p><p class="abstract"><strong>Results:</strong> <span lang="EN-IN">Significant difference between OPG, transcranial and CBCT were found for the presence of erosion (P =0.000), thickness of roof of glenoid fossa (P =0.000), deformed contour (P =0.001), joint space (P =0.011), subchondral sclerosis (P =0.011), irregularity of articular surface and eminence (P =0.000), flattening (P =0.050). </span></p><p class="abstract"><strong>Conclusions:</strong> Using CBCT as imaging technique in our study to detect osseous changes in the TMJ was proved to be effective as compared to the conventional radiographic techniques, the results achieved with CBCT was 100%.The results obtained in our study prove to be a full proof one and it seems to promise to go one step closer to detect progression and severity of the osseous changes in the condylar head and mandibular fossa in patients with TMDs<span lang="EN-IN">.</span></p>

scholarly journals Spatial analysis of mandibular condyles in patients with temporomandibular disorders and normal controls using cone beam computed tomography

2017 ◽  
Vol 11 (01) ◽  
pp. 099-105 ◽  
Author(s):  
Natheer Hashim Al-Rawi ◽  
Asmaa Tahseen Uthman ◽  
Sahar M. Sodeify
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cone Beam Computed Tomography ◽  
Joint Space ◽  
Cone Beam ◽  
Control Group ◽  
Articular Eminence ◽  
Linear Measurements ◽  
Condylar Position ◽  
Normal Controls

ABSTRACT Objectives: The aim of the study is to investigate the condylar position and its relation to articular eminence and axial condylar angle in temporomandibular joint disorder (TMD) patients and in normal controls using cone beam computed tomography (CBCT). Materials and Methods: CBCT temporomandibular joint (TMJ) images of 70 participants (38 males and 32 females, mean age 26.4 years) were analyzed. They were divided into control group (including 35 subjects) and study group (including 35 subjects). Linear measurements of joint space and condyle determined the condylar position of each TMJ. Articular eminence height and inclination were also measured with axial condylar angle to determine its relation to condylar position. Independent and paired sample t-test was applied to compare between the groups and TMJ sides of the same group at significance level of 0.05. Results: Statistical significant differences were found between males and females of both groups regarding superior joint space (SJS), lateral joint space, A-P, and M-L condyle distance (P < 0.05). SJS, medial joint space (MJS), and eminence angle were greater (P < 0.01) in male's joints with TMD with flatter axial condylar angle (P < 0.05), when compared with normal TMJ counterpart. Females TMJs showed significantly higher values of MJS of affected side when compared with normal counterpart with flatter axial condylar angle (P < 0.05). Conclusion: Superior and MJS parameters were the ones that showed significant differences between affected and nonaffected joints. The mean axial condylar angle was smaller in joints with abnormal TMJ. This indicates that the condyles of the affected joints may rotate inward.

scholarly journals Accuracy and Reproducibility of Facial Measurements of Digital Photographs and Wrapped Cone Beam Computed Tomography (CBCT) Photographs

Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 757
Author(s):  
Maged Sultan Alhammadi ◽  
Abeer Abdulkareem Al-mashraqi ◽  
Rayid Hussain Alnami ◽  
Nawaf Mohammad Ashqar ◽  
Omar Hassan Alamir ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Soft Tissue ◽  
Cone Beam Computed Tomography ◽  
High Reliability ◽  
Three Dimensional ◽  
Cone Beam ◽  
Cross Sectional ◽  
Facial Profile ◽  
Digital Photographs ◽  
Gonial Angle

The study sought to assess whether the soft tissue facial profile measurements of direct Cone Beam Computed Tomography (CBCT) and wrapped CBCT images of non-standardized facial photographs are accurate compared to the standardized digital photographs. In this cross-sectional study, 60 patients with an age range of 18–30 years, who were indicated for CBCT, were enrolled. Two facial photographs were taken per patient: standardized and random (non-standardized). The non-standardized ones were wrapped with the CBCT images. The most used soft tissue facial profile landmarks/parameters (linear and angular) were measured on direct soft tissue three-dimensional (3D) images and on the photographs wrapped over the 3D-CBCT images, and then compared to the standardized photographs. The reliability analysis was performed using concordance correlation coefficients (CCC) and depicted graphically using Bland–Altman plots. Most of the linear and angular measurements showed high reliability (0.91 to 0.998). Nevertheless, four soft tissue measurements were unreliable; namely, posterior gonial angle (0.085 and 0.11 for wrapped and direct CBCT soft tissue, respectively), mandibular plane angle (0.006 and 0.0016 for wrapped and direct CBCT soft tissue, respectively), posterior facial height (0.63 and 0.62 for wrapped and direct CBCT soft tissue, respectively) and total soft tissue facial convexity (0.52 for both wrapped and direct CBCT soft tissue, respectively). The soft tissue facial profile measurements from either the direct 3D-CBCT images or the wrapped CBCT images of non-standardized frontal photographs were accurate, and can be used to analyze most of the soft tissue facial profile measurements.

scholarly journals New Method for Analysis of the Temporomandibular Joint Using Cone Beam Computed Tomography

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3070
Author(s):  
Sebastian Iwaszenko ◽  
Jakub Munk ◽  
Stefan Baron ◽  
Adam Smoliński
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cross Section ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Section Plane ◽  
New Approach ◽  
Volume Of Interest ◽  
Gap Width

Modern dentistry commonly uses a variety of imaging methods to support diagnosis and treatment. Among them, cone beam computed tomography (CBCT) is particularly useful in presenting head structures, such as the temporomandibular joint (TMJ). The determination of the morphology of the joint is an important part of the diagnosis as well as the monitoring of the treatment results. It can be accomplished by measurement of the TMJ gap width at three selected places, taken at a specific cross-section. This study presents a new approach to these measurements. First, the CBCT images are denoised using curvilinear methods, and the volume of interest is determined. Then, the orientation of the vertical cross-section plane is computed based on segmented axial sections of the TMJ head. Finally, the cross-section plane is used to determine the standardized locations, at which the width of the gap between condyle and fossa is measured. The elaborated method was tested on selected TMJ CBCT scans with satisfactory results. The proposed solution lays the basis for the development of an autonomous method of TMJ index identification.

Sign in / Sign up

Export Citation Format

Share Document