scholarly journals Fiber morphology in fast growth Gmelina arborea plantations

2016 ◽  
Vol 13 (2) ◽  
pp. 3-13 ◽  
Author(s):  
Róger Moya Roque ◽  
Mario Tomazelo Fo ◽  
Edwin Canessa Amador
Keyword(s):  
Wood Quality ◽  
Solid Wood ◽  
Fast Growth ◽  
Tree Age ◽  
Gmelina Arborea ◽  
Fiber Morphology ◽  
Short Rotation ◽  
Bordered Pits ◽  
Length Width

Gmelina arborea is planted in large areas of forest with the objective of producing solid wood using well known silvicultural techniques and taking advantage of the properties of the wood quality of fast-growing tree species managed in short rotation systems. The aim of this study was to analyze the morphology and dimension of fibers from the pith to the bark in trees from fast growth plantations in northern Costa Rica.The results indicate that fiber morphology is irregular in both diameter and shape; with 1 to 4 septa, abundant crystals deposited in fiber lumina and minutely bordered pits with oblique and nonvestured apertures. Fiber length, width and cell wall thickness increased with tree age in the early stages. Lumen diameter was not correlated with tree age.

Kiln-drying lumber quality of hybrid poplar clones

Holzforschung ◽  
2007 ◽  
Vol 61 (1) ◽  
pp. 65-73 ◽  
Author(s):  
Kyu-Young Kang ◽  
Slobodan Bradic ◽  
Stavros Avramidis ◽  
Shawn D. Mansfield
Keyword(s):  
Global Climate ◽  
Hybrid Poplar ◽  
Value Added ◽  
Solid Wood ◽  
Wood Products ◽  
Kiln Drying ◽  
Wood Processing ◽  
Hybrid Poplars ◽  
Short Rotation

Abstract Hybrid poplars are currently used in North America primarily for the production of pulp fibre and in the manufacture of engineered solid wood products. Recently, the deployment of poplars as a short-rotation fibre crop has been of interest to mitigate the increasing amount of plantation-grown short fibre resources (hardwoods) derived from the Southern Hemisphere, as well as in the context of global climate change, both as a means to rapidly sequester carbon and as a feedstock for potential bioenergy production. Knowledge on the utility of hybrid poplars in the value-added secondary wood-processing sector, however, is very limited. To improve this situation, the variation in kiln-drying quality of five hybrid poplar genotypes of similar age, harvested from a common site in British Columbia, Canada, was evaluated for three different kiln-drying schedules. The results clearly demonstrate that the drying schedule has a greater effect on grade recovery and the degree of deformation than the hybrid poplar genotype. Furthermore, it was shown that many of the deformations inherently associated with wood derived from fast-grown trees can be reduced or removed with drying, in particular with an aggressive drying schedule.

scholarly journals Effects of the lateral growth rate on wood quality of Gmelina arborea from 3.5-, 7- and 12-year-old plantations

2009 ◽  
Vol 66 (5) ◽  
pp. 507-507 ◽  
Author(s):  
Miho Kojima ◽  
Hiroyuki Yamamoto ◽  
S. Nugroho Marsoem ◽  
Takashi Okuyama ◽  
Masato Yoshida ◽  
...  
Keyword(s):  
Growth Rate ◽  
Wood Quality ◽  
Lateral Growth ◽  
Gmelina Arborea ◽  
Lateral Growth Rate

SEM Study of Tension Wood Fiber Morphology and its Effect on Paper Properties

1977 ◽  
Vol 35 ◽  
pp. 308-309
Author(s):  
K. W. Robinson
Keyword(s):  
Tension Wood ◽  
Wood Fiber ◽  
Strength Properties ◽  
Fiber Morphology ◽  
Paper Properties ◽  
Pure Cellulose ◽  
Short Rotation ◽  
Hardwood Trees ◽  
Sem Study

Tension wood (TW) is an abnormal tissue of hardwood trees; although it has been isolated from most parts of the tree, it is frequently found on the upper side of branches and leaning stems. TW has been classically associated with geotropic alignment, but more recently it has been associated with fast growth. Paper made from TW is generally lower in strength properties. Consequently, the paper industries' growing dependence on fast growing, short- rotation trees will result in higher amounts of TW in the final product and a corresponding reduction in strength.Relatively few studies have dealt with the role of TW in the structure of paper. It was suggested that the lower strength properties of TW were due to a combination of factors, namely, its unique morphology, compression failures in the cell wall, and lower hemicellulose content. Central to the unique morphology of the TW fiber is the thick gelatinous layer (G-layer) composed almost entirely of pure cellulose.

Changing the face of short fiber –a review of the eucalyptus revolution

TAPPI Journal ◽  
2015 ◽  
Vol 14 (6) ◽  
pp. 353-359 ◽  
Author(s):  
PETER W. HART ◽  
RICARDO B. SANTOS
Keyword(s):  
Fossil Fuels ◽  
Wood Quality ◽  
Short Fiber ◽  
Fiber Volume ◽  
Private Industry ◽  
High Productivity ◽  
Paper Manufacturing ◽  
Short Rotation ◽  
Eucalypt Plantations ◽  
Eucalyptus Plantations

Eucalyptus plantations have been used as a source of short fiber for papermaking for more than 40 years. The development in genetic improvement and clonal programs has produced improved density plantations that have resulted in fast growing, increased fiber volume eucalypts becoming the most widely used source of short fibers in the world. High productivity and short rotation times, along with the uniformity and improved wood quality of clonal plantations have attracted private industry investment in eucalypt plantations. Currently, only a handful of species or hybrids are used in plantation efforts. Many more species are being evaluated to either enhance fiber properties or expand the range of eucalypt plantations. Eucalyptus plantations are frequently planted on nonforested land and may be used, in part, as a means of conserving native forests while allowing the production of high quality fiber for economic uses. Finally, eucalypt plantations can provide significant carbon sinks, which may be used to help offset the carbon released from burning fossil fuels. The development and expansion of eucalypt plantations represents a substantial revolution in pulp and paper manufacturing.

scholarly journals Sequential Oxidation on Wood and Its Application in Pb2+ Removal from Contaminated Water

2021 ◽  
Vol 2 (2) ◽  
pp. 245-256
Author(s):  
Priyanka R. Sharma ◽  
Sunil K. Sharma ◽  
Marc Nolan ◽  
Wenqi Li ◽  
Lakshta Kundal ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Average Length ◽  
Sodium Chlorite ◽  
Contaminated Water ◽  
Maximum Adsorption Capacity ◽  
Fiber Morphology ◽  
Carboxylate Groups ◽  
Carboxylate Content ◽  
Wide Range ◽  
Length Width

Raw wood was subjected to sequential oxidation to produce 2,3,6-tricarboxycellulose (TCC) nanofibers with a high surficial charge of 1.14 mmol/g in the form of carboxylate groups. Three oxidation steps, including nitro-oxidation, periodate, and sodium chlorite oxidation, were successfully applied to generate TCC nanofibers from raw wood. The morphology of extracted TCC nanofibers measured using TEM and AFM indicated the average length, width, and thickness were in the range of 750 ± 110, 4.5 ± 1.8, and 1.23 nm, respectively. Due to high negative surficial charges on TCC, it was studied for its absorption capabilities against Pb2+ ions. The remediation results indicated that a low concentration of TCC nanofibers (0.02 wt%) was able to remove a wide range of Pb2+ ion impurities from 5–250 ppm with an efficiency between 709–99%, whereby the maximum adsorption capacity (Qm) was 1569 mg/g with R2 0.69531 calculated from Langmuir fitting. It was observed that the high adsorption capacity of TCC nanofibers was due to the collective effect of adsorption and precipitation confirmed by the FTIR and SEM/EDS analysis. The high carboxylate content and fiber morphology of TCC has enabled it as an excellent substrate to remove Pb2+ ions impurities.

Sign in / Sign up

Export Citation Format

Share Document