Evaluation of Aerogel Spheres Derived from Salix psammophila in Removal of Heavy Metal Ions in Aqueous Solution

Heavy metal wastewater treatment is a huge problem facing human beings, and the application degree of Salix psammophila resources produced by flat stubble is low. Therefore, it is very important to develop high-value products of Salix psammophila resources and apply them in the removal heavy metal from effluent. In this work, we extracted the cellulose from Salix psammophila, and cellulose nanofibers (CNFs) were prepared through TEMPO oxidation/ultrasound. The aerogel spheres derived from Salix psammophila (ASSP) were prepared with the hanging drop method. The experimental results showed that the Cu(II) adsorption capacity of the ASSP composite (267.64 mg/g) doped with TOCNF was significantly higher than that of pure cellulose aerogel spheres (52.75 mg/g). The presence of carboxyl and hydroxyl groups in ASSP enhanced the adsorption capacity of heavy metals. ASSP is an excellent heavy metal adsorbent, and its maximum adsorption values for Cu(II), Mn(II), and Zn(II) were found to be 272.69, 253.25, and 143.00 mg/g, respectively. The abandoned sand shrub resource of SP was used to adsorb heavy metals from effluent, which provides an important reference value for the development of forestry in this sandy area and will have a great application potential in the fields of the adsorption of heavy metals in soil and antibiotics in water.

Transparent Cellulose-Based Films Prepared from Used Disposable Paper Cups via an Ionic Liquid

Paper cups are widely employed in daily life with many advantages, but most of the used paper cups are incinerated or landfilled, due to the great challenge of separating the thin inner polyethylene (PE) coating, causing the waste of energy and the pollution of our environment. Therefore, recycling and converting the used paper cups into high-value materials is meaningful and important. In this work, transparent cellulose-based films were successfully prepared from the used paper cups via 1-allyl-3-methylimidazolium chloride ionic liquid after simple pretreatment. Additionally, the difference in properties and structures of cellulose-based films regenerated in different coagulation baths (water or ethanol) was also explored. It was found that the cellulose-based film possessed good thermal property and displayed better hydrophobicity than the traditional pure cellulose film. Moreover, they also demonstrated good mechanical property and the tensile strength of cellulose-based film regenerated in water can reach 31.5 Mpa, higher than those of cellulose-based film regenerated in ethanol (25.5 Mpa) and non-degradable polyethylene film (9–12 MPa), indicating their great potential as the packaging materials. Consequently, valorization of the low cost used paper cups and preparation of high-valve cellulose-based films were realized simultaneously by a facile and green process.

Bacterial Cellulose: Production, Characterization and Application as Antimicrobial Agent

Bacterial cellulose (BC) is recognized as a multifaceted, versatile biomaterial with abundant applications. Groups of microorganisms such as bacteria are accountable for BC synthesis through static or agitated fermentation processes in the presence of competent media. In comparison to static cultivation, agitated cultivation provides the maximum yield of the BC. A pure cellulose BC can positively interact with hydrophilic or hydrophobic biopolymers while being used in the biomedical domain. From the last two decades, the reinforcement of biopolymer-based biocomposites and its applicability with BC have increased in the research field. The harmony of hydrophobic biopolymers can be reduced due to the high moisture content of BC in comparison to hydrophilic biopolymers. Mechanical properties are the important parameters not only in producing green composite but also in dealing with tissue engineering, medical implants, and biofilm. The wide requisition of BC in medical as well as industrial fields has warranted the scaling up of the production of BC with added economy. This review provides a detailed overview of the production and properties of BC and several parameters affecting the production of BC and its biocomposites, elucidating their antimicrobial and antibiofilm efficacy with an insight to highlight their therapeutic potential.

Preparation and Characterization of Polybutylene Succinate Reinforced with Pure Cellulose Nanofibril and Lignocellulose Nanofibril Using Two-Step Process

This study reports the preparation of a polybutylene succinate (PBS) film reinforced with pure cellulose nanofibril (PCNF) and lignocellulose nanofibril (LCNF) by a two-step process that consists of solvent dispersion and twin-screw extrusion. Compared to the conventional one-step process, this method offered improved mechanical properties. The addition of 5% CNF increased the tensile properties up to 18.8%. Further, the effect of the lignin content was also studied by using LCNF as a reinforcement. The LCNF was prepared with and without a deep eutectic solvent (DES) pretreatment to gain LCNF with a lignin content that varied between 5, 19, and 30%. The mechanical properties results show that a 5% addition of LCNF to the PBS matrix increased its tensile strength and elastic modulus. Further, the morphological and thermal properties of the composites were also studied in detail.

Polystyrene Sulfonate is Effective for Enhancing Biomass Enzymatic Saccharification Under Green Liquor Pretreatment in Bioenergy Poplar

Background: Water-soluble lignin (particularly lignosulfonate, LS) has been well documented for its significance on enzymatic saccharification of lignocellulose, though the promotion mechanism has not been fully understood. Much attention has been paid to natural lignin or its derivatives. The disadvantage of using natural lignin-based polymers as promoting agents lies in the difficulty in tailor-incorporating functional groups due to their complex 3D structures. To further improve our understanding on the promotion mechanism of water-soluble lignin in the bio-conversion of lignocellulose and to pursue better alternatives with different skeleton structures other than natural lignin, herein we reported a synthetic soluble linear aromatic polymer, sodium polystyrene sulfonate (PSS), to mimic LS for enhancing the efficiency of enzymatic saccharification. Results: The role of PSS played in enzymatic saccharification of pure cellulose and green liquor pretreated poplar (GL-P) was explored by analyzing substrate enzymatic digestibility (SED) under different addition dosages and various pH media, along with LS for comparison. At the cellulase loading of 13.3 FPU/g-glucan, the glucose yield of GL-P increased from 53% for the control to 81.5% with PSS addition of 0.1 g/g-substrate. It outperformed LS with the addition of 0.2 g/g-substrate by 6.3%. In the pH range from 4.5 to 6, PSS showed a positive effect on lignocellulose saccharification with the optimum pH at 4.8, where the most pronounced SED of GL-P was achieved. The underlying mechanism was unveiled by measuring zeta potential and using Quartz Crystal Microbalance (QCM) and Multi-parametric Surface Plasmon Resonance (MP-SPR). The results confirmed that the complexes of cellulase and PSS were conjugated and the negatively superchanged complexes reduced non-productive binding effectively along with the improved saccharification efficiency. The thickness of PSS required to block the binding sites of cellulase film was less than half of that of LS, and the PSS adlayer on cellulase film is also more hydrated and with a much lower shear modulus than LS adlayer. Conclusions: PSS as LS analogue is effective for enhancing the biomass enzymatic saccharification of GL-pretreated poplar. PSS exhibited a severer inhibition on the enzymatic saccharification of pure cellulose, whilst a more positive effect on bioconversion of lignocellulose (GL-P) than LS. In addition, a much lower dosage is required by PSS. The dynamic enzymatic hydrolysis indicated PSS could prolong the processive activity of cellulase. The valid data stemmed from QCM and SPR expressed that PSS bound to cellulases and the as-formed complexes reduced the nonproductive adsorption of cellulase onto substrate lignin more efficiently than LS due to its flexible skeleton and highly hydrated structure. Therefore, PSS is a promising alternative promoting agent for lignocellulose saccharification. From another perspective, the synthetic lignin mimics with controllable structures enable us to reach an in-depth understanding of the promotion mechanism of soluble lignins on enzymatic saccharification.

Microbial Retting of Banana Pseudostem

Fibrous wastes correspond to approximately 54.3 wt.-% of a banana plant. The waste weight is mainly of bunches, stems, and leaves. These ligno-cellulosic fibre waste can be designed and tailored to yield value added products which can be exploited by the farmers, exporters and weavers. Pectin (plant cement) and hemicelluloses (22-25%) found in plant cell walls in the plate (middle lamella). These macromolecules have needs to be hydrolyzed faster without affecting the quality of fibre. The chemical and mechanical processes adopted for fibres actually affect color uptake, strength of fibre thus fetching lower price. We report a biological ecofriendly method of retting where pectinases produced by the endophytic microorganisms of banana pseudostem were used to separate the fibre bundles of cellulose.. Endophytes are microorganisms which live in close relationship with living plant tissues in a cooperative relationship delivering a few auxiliary metabolites and proteins with the possibility to hydrolyse a few plant-determined macromolecules of the host. They spend the entire or part of their lifecycle colonizing within sound tissues of the host plants.The endophytic pectinase helps to break down the cell walls and can find commercial application in extraction of fibres.Seven bacterial isolates were screened and isolated in pectinase screening agar medium [PSAM]. Pectinase producing endophytic bacteria is isolated from corm of Amorphophallus paeoniifolius reported by us are Staphylococcus sciuri, Exiguobacterium acetylicum, Exiguobacterium indicum which are good pectinase producers having specific activity of 8.26, 12.61, 6.81 respectively. Treatment of banana pseudostem with these microbes showed 91%, 94%, 96.7% loss in the total weight of stem leaving behind pure cellulose fibres.

Wet-Spun Composite Filaments from Lignocellulose Nanofibrils/Alginate and Their Physico-Mechanical Properties

Lignocellulose nanofibrils (LCNFs) with different lignin contents were prepared using choline chloride (ChCl)/lactic acid (LA), deep eutectic solvent (DES) pretreatment, and subsequent mechanical defibrillation. The LCNFs had a diameter of 15.3–18.2 nm, which was similar to the diameter of commercial pure cellulose nanofibrils (PCNFs). The LCNFs and PCNFs were wet-spun in CaCl2 solution for filament fabrication. The addition of sodium alginate (AL) significantly improved the wet-spinnability of the LCNFs. As the AL content increased, the average diameter of the composite filaments increased, and the orientation index decreased. The increase in AL content improved the wet-spinnability of CNFs but deteriorated the tensile properties. The increase in the spinning rate resulted in an increase in the orientation index, which improved the tensile strength and elastic modulus.

Silk-Cellulose Acetate Biocomposite Materials Regenerated from Ionic Liquid

The novel use of ionic liquid as a solvent for biodegradable and natural organic biomaterials has increasingly sparked interest in the biomedical field. As compared to more volatile traditional solvents that rapidly degrade the protein molecular weight, the capability of polysaccharides and proteins to dissolve seamlessly in ionic liquid and form fine and tunable biomaterials after regeneration is the key interest of this study. Here, a blended system consisting of Bombyx Mori silk fibroin protein and a cellulose derivative, cellulose acetate (CA), in the ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIMAc) was regenerated and underwent characterization to understand the structure and physical properties of the films. The change in the morphology of the biocomposites (by scanning electron microscope, SEM) and their secondary structure analysis (by Fourier-transform infrared spectroscopy, FTIR) showed that the samples underwent a wavering conformational change on a microscopic level, resulting in strong interactions and changes in their crystalline structures such as the CA crystalline and silk beta-pleated sheets once the different ratios were applied. Differential scanning calorimetry (DSC) results demonstrated that strong molecular interactions were generated between CA and silk chains, providing the blended films lower glass transitions than those of the pure silk or cellulose acetate. All films that were blended had higher thermal stability than the pure cellulose acetate sample but presented gradual changes amongst the changing of ratios, as demonstrated by thermogravimetric analysis (TGA). This study provides the basis for the comprehension of the protein-polysaccharide composites for various biomedical applications.

Conversion of organosolv pretreated hardwood biomass into 5-hydroxymethylfurfural (HMF) by combining enzymatic hydrolysis and isomerization with homogeneous catalysis

Background Over the last few years, valorization of lignocellulosic biomass has been expanded beyond the production of second-generation biofuels to the synthesis of numerous platform chemicals to be used instead of their fossil-based counterparts. One such well-researched example is 5-hydroxymethylfurfural (HMF), which is preferably produced by the dehydration of fructose. Fructose is obtained by the isomerization of glucose, which in turn is derived by the hydrolysis of cellulose. However, to avoid harsh reaction conditions with high environmental impact, an isomerization step towards fructose is necessary, as fructose can be directly dehydrated to HMF under mild conditions. This work presents an optimized process to produce fructose from beechwood biomass hydrolysate and subsequently convert it to HMF by employing homogeneous catalysis. Results The optimal saccharification conditions were identified at 10% wt. solids loading and 15 mg enzyme/gsolids, as determined from preliminary trials on pure cellulose (Avicel® PH-101). Furthermore, since high rate glucose isomerization to fructose requires the addition of sodium tetraborate, the optimum borate to glucose molar ratio was determined to 0.28 and was used in all experiments. Among 20 beechwood solid pulps obtained from different organosolv pretreatment conditions tested, the highest fructose production was obtained with acetone (160 °C, 120 min), reaching 56.8 g/100 g pretreated biomass. A scale-up hydrolysis in high solids (25% wt.) was then conducted. The hydrolysate was subjected to isomerization eventually leading to a high-fructose solution (104.5 g/L). Dehydration of fructose to HMF was tested with 5 different catalysts (HCl, H3PO4, formic acid, maleic acid and H-mordenite). Formic acid was found to be the best one displaying 79.9% sugars conversion with an HMF yield and selectivity of 44.6% and 55.8%, respectively. Conclusions Overall, this work shows the feasibility of coupling bio- and chemo-catalytic processes to produce HMF from lignocellulose in an environmentally friendly manner. Further work for the deployment of biocatalysts for the oxidation of HMF to its derivatives could pave the way for the emergence of an integrated process to effectively produce biobased monomers from lignocellulose.

Effects of dietary fiber on glycemia and lipid profile in aging diabetic rats

Dietary fiber is a group of food components which is the subject of many studies on several aspects of human health. Recent research demonstrate that dietary fiber intake is associated with reduced diabetes risk. The aim of the present work was to test the effect of dietary fiber such as cellulose and mucilage on disorders of lipid metabolism induced by experimental diabetes in the aged Wistar rats. Diabetes was induced by intraperitoneal injection of streptozotocin. Aging male Wistar rats diabetic and control rats were fed highly-pure-cellulose-mucilage-enriched (HPCME) diet or control diet for 2 months. At the end of study, blood samples and tissue are collected for de-termination of biochemical parameters (glucose, total cholesterol, triglycer-ides and lipoproteins) and lipases activities. 2 months of HPCME diet intake by diabetic aged rats improves diabetic control, induced a decrease of body weight, a reduction of plasma lipid concentration, lower blood-glucose and a significant decrease in expression of pathway lipolytic enzyme activities va-lues witch decrease the prevalence of the specific disorders of diabetes. This study suggests that dietary fiber (HPCME), has an important physiological effect on glucose and lipid metabolism during aging which reduces the risk of developing complications of diabetes.