scholarly journals Метод диффузии цинка в InP через узкий зазор с использованием планарного источника на основе Zn-=SUB=-3-=/SUB=-P-=SUB=-2-=/SUB=-

2018 ◽  
Vol 44 (14) ◽  
pp. 19
Author(s):  
М.О. Петрушков ◽  
М.А. Путято ◽  
И.Б. Чистохин ◽  
Б.Р. Семягин ◽  
Е.А. Емельянов ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Morphology ◽  
Charge Carrier ◽  
Narrow Gap ◽  
Carrier Distribution ◽  
Cross Sectional ◽  
Diffusion Depth ◽  
Zinc Diffusion ◽  
Scanning Electron

AbstractAn original technology of zinc diffusion into InP via a narrow gap is described, which allows reproducible formation of p–n junctions with preset depth of doping and retained surface morphology of the doped layers. Using the proposed method, desired charge carrier distribution profiles in Zn-doped InP layers were obtained. It has been experimentally confirmed that the method of cross-sectional scanning electron microscopy allows to precision measure of the zinc diffusion depth.

Isolasi Dan Karakterisasi Bentonit Alam Menjadi Nanopartikel Monmorillonit

2018 ◽  
Vol 3 (1) ◽  
pp. 12 ◽  
Author(s):  
Zaimahwati Zaimahwati ◽  
Yuniati Yuniati ◽  
Ramzi Jalal ◽  
Syahman Zhafiri ◽  
Yuli Yetri
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Surface Morphology ◽  
Average Diameter ◽  
Particle Size Analyzer ◽  
Ft Ir ◽  
Scanning Electron ◽  
Sedimentation Processes

<p>Pada penelitian ini telah dilakukan isolasi dan karakterisasi bentonit alam menjadi nanopartikel montmorillonit. Bentonit alam yang digunakan diambil dari desa Blangdalam, Kecamatan Nisam Kabupaten Aceh Utara.  Proses isolasi meliputi proses pelarutan dengan aquades, ultrasonic dan proses sedimentasi. Untuk mengetahui karakterisasi montmorillonit dilakukan uji FT-IR, X-RD dan uji morfologi permukaan dengan Scanning Electron Microscopy (SEM). Partikel size analyzer untuk menganalisis dan menentukan ukuran nanopartikel dari isolasi bentonit alam. Dari hasil penelitian didapat ukuran nanopartikel montmorillonit hasil isolasi dari bentonit alam diperoleh berdiameter rata-rata 82,15 nm.</p><p><em>In this research we have isolated and characterized natural bentonite into montmorillonite nanoparticles. Natural bentonite used was taken from Blangdalam village, Nisam sub-district, North Aceh district. The isolation process includes dissolving process with aquades, ultrasonic and sedimentation processes.  The characterization of montmorillonite, FT-IR, X-RD and surface morphology test by Scanning Electron Microscopy (SEM). Particle size analyzer to analyze and determine the size of nanoparticles from natural bentonite insulation. From the research results obtained the size of montmorillonite nanoparticles isolated from natural bentonite obtained an average diameter of 82.15 nm.</em></p>

Characterization of Thin Polymer Blend Films using ESEM – No Charging, No Staining.

2001 ◽  
Vol 707 ◽  
Author(s):  
Ian C. Bache ◽  
Catherine M. Ramsdale ◽  
D. Steve Thomas ◽  
Ana-Claudia Arias ◽  
J. Devin MacKenzie ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Scanning Electron Microscopy ◽  
Environmental Scanning ◽  
Cross Sectional ◽  
Blend Films ◽  
Thin Polymer ◽  
Device Applications ◽  
Scanning Electron

ABSTRACTCharacterising the morphology of thin films for use in device applications requires the ability to study both the structure within the plane of the film, and also through its thickness. Environmental scanning electron microscopy has proved to be a fruitful technique for the study of such films both because contrast can be seen within the film without the need for staining (as is conventionally done for electron microscopy), and because cross-sectional images can be obtained without charging artefacts. The application of ESEM to a particular blend of relevance to photovoltaics is described.

Deposition of Polypyrrole Onto a Novel Polymer Electrode for Use in a Biomimetic Artificial Excitable Cell Membrane

2010 ◽  
Author(s):  
Christina V. Haden ◽  
Donald A. Jordan ◽  
Pamela M. Norris
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Membrane ◽  
Surface Morphology ◽  
Polymer Membrane ◽  
Electroactive Polymer ◽  
Gating System ◽  
Excitable Cell ◽  
Semi Solid ◽  
Scanning Electron

A novel and inexpensive bucky gel electrode has been investigated for use as the electrode substrate for deposition of polypyrrole. The electroactive polymer membrane was successfully deposited and the surface morphology studied using scanning electron microscopy. Given the properties of the bucky gel electrode and its ability to conduct ions, this work establishes the first step towards a semi-solid ion-gating system to be used in further applications.

Stability and Performance Study of Polyethersulfone Membranes Modified Using Polyelectrolytes

2013 ◽  
Vol 65 (4) ◽  
Author(s):  
Law Yong Ng ◽  
Abdul Wahab Mohammad ◽  
Ching Yin Ng ◽  
Nur Hanis Hayati Hairom
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Research Work ◽  
Performance Study ◽  
Salt Solutions ◽  
Cross Sectional ◽  
And Performance ◽  
Surface Modified ◽  
Lower Contact ◽  
Scanning Electron

In this research work, porous PES membranes were initially pre-heated for certain duration of time and then surface-modified to reject the MgSO4 salt solutions through self-adsorption of polyelectrolytes. From the experimental work, higher membrane salt rejection capability can be obtained when the number of polyelectrolyte bilayers is increased. The images of the cross-sectional morphology of modified and non-modified membranes were obtained using field emission scanning electron microscopy (FESEM). All modified membranes showed relatively lower contact angle values.

Analyse of Indium Loss in Preparation of CuInSe2 Flims for Solar Cells

2011 ◽  
Vol 183-185 ◽  
pp. 1837-1841
Author(s):  
Lei Sha ◽  
Yan Lai Wang ◽  
Shi Liang Ban
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Scanning Electron Microscopy ◽  
Stainless Steel ◽  
Solar Cells ◽  
Surface Morphology ◽  
Energy Dispersive Spectroscopy ◽  
Titanium Substrates ◽  
Selenization Process ◽  
Scanning Electron

CuInSe2 thin films were obtained by selenization of the Cu-In precursors in the atmosphere of Se vapour, which were prepared on stainless steel and titanium substrates by electrodeposition. The films were characterized by XRD, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The respective influences of composition, phases and surface morphology of Cu-In precursors on indium loss were investigated. The results indicate that the indium loss occurs in selenization process because of volatile In2Se arising. The indium loss is less in selenization process of Cu-In precursors contained CuIn, Cu2In and In phases.

Sign in / Sign up

Export Citation Format

Share Document