Moisture Sorption Isotherms and Thermodynamic Properties of Carrot

2011 ◽  
Vol 7 (3) ◽  
Author(s):  
Valeria S. Eim ◽  
Carmen Rosselló ◽  
Antoni Femenia ◽  
Susana Simal
Keyword(s):  
Moisture Content ◽  
Dry Matter ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Isosteric Heat ◽  
Nonlinear Regression Analysis ◽  
Mean Relative Error ◽  
Moisture Sorption Isotherms ◽  
Different Temperatures ◽  
Water Sorption Isotherms

The water sorption isotherms of carrot were determined at five different temperatures (at 10, 20, 30, 40 and 50ºC) within wide ranges of moisture content (1.3-78.4 kg water /100 kg dry matter) and water activities (0.165-0.907) by using a standardized conductivity thermohygrometer. The sorption isotherms exhibited the type III behaviour, thus, an increase in temperature promoted a decrease in water activity. The GAB, Halsey, Henderson, Iglesias & Chirife and Oswin models were tested to fit the experimental data by using nonlinear regression analysis. The GAB and Henderson models satisfactorily described the sorption isotherms (mean relative error < 5.6%). The net isosteric heat of sorption (Qstn) and the differential entropy (Sd), estimated as functions of the moisture content, decreased as the carrot moisture content increased.

Modeling of moisture sorption isotherm and evaluation of net isosteric heat for spray-dried fortified coconut (Cocos nucifera L.) powder

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Juan Carlos Lucas Aguirre ◽  
German Antonio Giraldo Giraldo ◽  
Misael Cortés Rodríguez
Keyword(s):  
Experimental Data ◽  
Moisture Content ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Isosteric Heat ◽  
Fundamental Parameter ◽  
Sorption Data ◽  
Content Type ◽  
Moisture Sorption Isotherms ◽  
Different Temperatures

PurposeIn order to understand interactions aw vs equilibrium moisture content (EMC) in fortified coconut powder, moisture sorption isotherms were constructed under different storage conditions in order to predict the changes in their physical, chemical and microbiological properties that occur during storage and processing, which are unique to each food.Design/methodology/approachFor which the moisture sorption isotherms were determined at three different temperatures (15, 25 and 35 °C), in a range of water activity from 0.1 to 0.90. Nine models, namely, the GAB, BET, Oswin, Smith, Halsey, Henderson, Chung and Pfost, Peleg and Caurie equations, were fitted to the sorption data. Various statistical tests were adopted as criteria to evaluate the fit performance of the models.FindingsOf the models tested, the Peleg model gave the best fit to experimental data (R2 = 0.997; RMSE = 0.276), across the full range of water activities and at different temperatures. Humidity of the monolayer (mo) was found between 2.54 and 2.34%, a fundamental parameter to define the storage and control conditions, given that it is considered the value at which the product is more stable. The net sorption isosteric heat (Qst) increased to maximum and then diminished with increased moisture content (Xw); maximum values were obtained in the Xw interval between 0.48 and 2.87% (db), being between 35.72 and 99.26 kJ/mol, where the maximum value indicates coverage of the strongest bond sites and higher adsorbate-adsorbent interaction.Originality/valueThese results provide reliable experimental data on water absorption isotherms of the CP + FAC important to determine optimal processing, storing and packaging conditions.

scholarly journals Moisture sorption isotherms of castor beans. Part 1: Mathematical modeling and hysteresis

2016 ◽  
Vol 20 (8) ◽  
pp. 751-756 ◽  
Author(s):  
André L. D. Goneli ◽  
Paulo C. Corrêa ◽  
Gabriel H. H. de Oliveira ◽  
Osvaldo Resende ◽  
Munir Mauad
Keyword(s):  
Moisture Content ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Environmental Condition ◽  
Adsorption And Desorption ◽  
Moisture Sorption Isotherms ◽  
Different Temperatures ◽  
The Difference ◽  
The Stability ◽  
And Storage

ABSTRACT Sorption isotherms are of great importance in post-harvest procedures, especially for predicting drying and storage, which help to establish the final moisture content of the product under certain environmental condition. Hysteresis is a phenomenon that occurs due to the difference between adsorption and desorption curves, which aids the evaluation of chemical and microbiological deteriorations, indicating the stability of stored products. Moisture sorption isotherms of castor beans were determined and hysteresis was analyzed. Static gravimetric technique at different temperatures (25, 35, 45 and 55 ± 1 °C) was used. Saturated salt solutions in the range of 37-87% ± 2% were utilized to create the required controlled relative humidity environment. Equilibrium moisture content data were correlated by different mathematical models and the Modified Halsey model presented good adjustment for the data, according to statistical procedures. Hysteresis between adsorption and desorption isotherms is present over the range of 0.2-0.9 of water activity, regardless of the temperature. This phenomenon decreases with temperature increase.

Moisture Sorption Isotherms and Net Isosteric Heats of Sorption of Green Soybean

2012 ◽  
Vol 8 (3) ◽  
Author(s):  
Zhao Yang ◽  
Enlong Zhu ◽  
Zongsheng Zhu
Keyword(s):  
Moisture Content ◽  
Equilibrium Moisture Content ◽  
Sorption Capacity ◽  
Water Activity ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Isosteric Heat ◽  
Model Parameters ◽  
Desorption Process ◽  
Moisture Sorption Isotherms

Abstract Moisture sorption isotherms of green soybean seeds were determined by static gravimetric method and water activity ranging from 0.11to 0.94 at 20, 30 and 40°C. The optimal sorption model of green soybean was determined by using nonlinear regression method. Modified BET multilayer sorption theory model parameters at different temperatures were calculated, isosteric sorption heat was derived by the water activity sorption isosteric model. Results indicated that sorption isotherms were belong to type III behaviour, a notable hysteresis effect was observed, Green soybean monolayer saturated sorption capacity was greater in desorption process than that of adsorption. The monolayer saturated sorption capacity decreased with increasing temperature, while the number of multilayer had a reverse trend with the monolayer saturated sorption capacity, the optimal sorption isotherm model for green soybean is Halsey model, The thermodynamic parameters including net isosteric heat of adsorption and desorption calculated at 40°C were 105.2-1865.4 kJ/kg and 111.62-1939.0 kJ/kg with equilibrium moisture content between 5% and 32% (d.b.), respectively. The net isosteric heat of sorption decreased with increasing equilibrium moisture content.

scholarly journals Moisture sorption isotherms and isosteric heat sorption of habanero pepper (Capsicum chínense) dehydrated powder

2018 ◽  
Author(s):  
Mario Luna-Flores ◽  
Mariana Gisela Peña-Juarez ◽  
Angélica Mara Bello-Ramirez ◽  
Javier Telis-Romero ◽  
Guadalupe Luna-Solano
Keyword(s):  
Moisture Content ◽  
Water Activity ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Isosteric Heat ◽  
Convective Drying ◽  
Hysteresis Phenomenon ◽  
Dynamic Vapor Sorption ◽  
Habanero Pepper ◽  
Moisture Sorption Isotherms

Moisture sorption isotherms of the habanero pepper powder were determined using the Dynamic Vapor Sorption (DVS) method at 20, 25, 35, 45 and 55 °C in a range of water activity from 0.10 to 0.90 at which the processes of drying, packing and storage of habanero pepper are developed. The sorption capacity decreased with increasing temperature at a given water activity and the sorption isotherms showed a sigmoid form (Type II). The hysteresis phenomenon was observed in the sorption isotherms at all temperatures studied and it was more pronounced at temperatures high. The experimental sorption curves were fitting to the GAB, BET and Oswin models. It was concluded that the models that best describe the adsorption and desorption data for habanero pepper dehydrated powder were the GAB and Oswin models.  The isosteric heat of water sorption was calculated with the moisture content data in equilibrium. The desorption isotherms present a higher isosteric heat in relation to the adsorption isotherms. In both, the isosteric heat decreased as the moisture content increased. Keywords: Habanero pepper dehydrated powder; Convective drying; Moisture sorption isotherms; Mathematic models

scholarly journals Moisture Sorption Characteristics of Corn Stover and Big Bluestem

2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
C. Karunanithy ◽  
K. Muthukumarappan ◽  
A. Donepudi
Keyword(s):  
Moisture Content ◽  
Corn Stover ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Isotherm Models ◽  
Big Bluestem ◽  
Moisture Sorption Isotherms ◽  
Typical Type ◽  
Different Temperatures ◽  
Gab Model

Moisture content is an important feedstock quality in converting it into energy through biochemical or thermochemical platforms. Knowledge of moisture sorption relationship is useful in drying and storage to preserve the quality of feedstocks. Moisture sorption isotherms for potential feedstocks such as corn stover and big bluestem are missing. EMC values of corn stover and big bluestem were determined using static gravimetric technique with saturated salt solutions (ERH 0.12–0.89) at different temperatures (20, 30, and 40°C). Depending upon the ERH values, EMC values were ranged from 8.0 to 19.6 and 8.8 to 19.2% db for corn stover and big bluestem, respectively, and they followed typical type II isotherm found in food materials. Nonlinear regression was used to fit five commonly used three-parameter isotherm models (i.e., modified Oswin model, modified Halsey model, modified Chung-Pfost model, modified Henderson model, and the modified Guggenheim-Anderson-de Boer (GAB) model) to the experimental data. Modified Halsey emerged as the best model with highF-statistic andR2values with lowEmandEsand fairly random scattered residual plot for corn stover and big bluestem. These models can be used to predict the equilibrium moisture content of these feedstocks starting from harvesting, drying, preprocessing, transportation, storage, and conversion.

Moisture Sorption Isotherms of Osmotically Dehydrated Sweet Pepper

2007 ◽  
Vol 3 (5) ◽  
Author(s):  
Jatindra Kumar Sahu ◽  
Ajita Tiwari
Keyword(s):  
Moisture Content ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Isosteric Heat ◽  
Sweet Pepper ◽  
Coefficient Of Determination ◽  
Clapeyron Equation ◽  
Moisture Sorption Isotherm ◽  
Moisture Sorption Isotherms ◽  
Monolayer Moisture

Moisture sorption isotherms of osmotically dehydrated sweet peppers were determined at 15oC, 30oC and 40oC using static desiccator techniques. In the study, seven levels of water activity in range of 0.08 to 0.91 were used by the use of saturated salt solutions. The isotherms were found to be sigmoid type and of BET classification II. Out of seven sorption models i.e. BET, modified BET, Hasley, Caurie, GAB, Oswin and Smith, fitted to the experimental data, Oswin model was found to be the best for accurate prediction of moisture sorption isotherm with highest value of coefficient of determination (R2) and lowest values of standard error (SE) and relative deviation parentage (Rd). The value of monolayer moisture content of the osmotically dehydrated sweet pepper was found to be 3.037%, 3.934% and 4.432% (db) at 15oC, 30oC and 40oC respectively. The values of net isosteric heat of sorption as calculated by Clausius–Clapeyron equation showed a regular fall with increase in moisture content.

scholarly journals Determination of Moisture Sorption Isotherm of Crosslinked Millet Flour and Oxirane Using GAB and BET

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
M. S. Alamri ◽  
A. A. Mohamed ◽  
S. Hussain ◽  
M. A. Ibraheem ◽  
Akram A. Abdo Qasem
Keyword(s):  
Relative Humidity ◽  
Moisture Content ◽  
Sorption Isotherm ◽  
Sorption Isotherms ◽  
Moisture Sorption ◽  
Water Binding ◽  
Moisture Sorption Isotherm ◽  
Water Sorption Isotherm ◽  
Moisture Sorption Isotherms ◽  
Different Temperatures

Epoxy resin was prepared by crosslinking epoxidized oil and millet flour. The reaction was carried out at three different temperatures (25, 40, and 55°C) and zinc chloride levels (1, 2, and 3%). Moisture sorption isotherms were determined at 0.1 to 0.9 water activity (aw) using a gravimetric sorption analyzer (Q 2000). The sigmoidal shape (type II) of the resin isotherms exhibited lower equilibrium moisture content (EMC) at higher temperature. The experimental data were modeled using GAB (Guggenheim–Anderson–de Boer) and BET (Brunauer–Emmett–Teller). The EMC of the resin was significantly lower than that of the flour, which could be attributed to the decrease in the number of water-binding sites due to the creation of dense areas during crosslinking. The low root-mean-square error (RMSE) indicates that GAB and BET were suitable for predicting the water sorption isotherm for millet flour resin. The heat of sorption of the resin was large at low moisture content and increased at higher relative humidity. It is recommended that millet flour resin be used at relative humidity below 60%.

Sign in / Sign up

Export Citation Format

Share Document