Dynamic Model for Polyethylene Production in a Multizone Circulating Reactor

2008 ◽  
Vol 3 (1) ◽  
Author(s):  
Nayef M. Ghasem ◽  
Wee-Lee Ang ◽  
Mohamed Azlan Hussain
Keyword(s):  
Molecular Weight ◽  
Dynamic Model ◽  
Average Molecular Weight ◽  
Monomer Concentration ◽  
Reactor Design ◽  
Sensitivity Analyses ◽  
Reactor Length ◽  
Polyethylene Production ◽  
Reactor Temperature ◽  
Simulated Time

The multizone circulating reactor (MZCR) technology is a newly announced reactor design for solid-catalyzed gas-phase polymerization. The process is characterized by two hydrodynamically distinct but interconnecting polymerization zones, thus forming a continuous loop of polymer flow between the said zones. In the present study, a dynamic model for the MZCR reactor is developed to illustrate the basic dynamic behavior of the new reactor design; the model is used to study the copolymerization of ethylene with butene. Several parameter sensitivity analyses are performed to show the computer-simulated time responses for reactor temperature, number-average molecular weight, weight-average molecular weight, catalyst feed rate and the monomer concentration along the reactor length.

Synthesis of Ultra-High Molecular Weight Polyacrylonitrile (UHMWPAN) by Aqueous Suspension Polymerization

2015 ◽  
Vol 1120-1121 ◽  
pp. 615-619
Author(s):  
Hui Yu Jiang ◽  
Mei Hua Zhou ◽  
Ding Pan
Keyword(s):  
Molecular Weight ◽  
Suspension Polymerization ◽  
Aqueous Suspension ◽  
Average Molecular Weight ◽  
Monomer Concentration ◽  
Polymerization Process ◽  
Polymerization Temperature ◽  
Different Temperatures ◽  
Total Monomer Concentration ◽  
Ultra High Molecular Weight

Acrylonitrile (AN) and itaconic acid (IA) were used to synthesize UHMWPAN by aqueous suspension method with 2,2’-azobisisobutyronitrile (AIBN) as the initiator and polyvinylalcohol (PVA) as the disperser at different temperatures (55°C~75°C) for different timings (1.0h~3.0h). The usage amounts of AN, IA, AIBN and PVA were also technical polymerization parameters used to obtain the optimal polymerization process. We found that the conversion and the viscosity average molecular weight both achieved the optimum levels when the conditions were as follows: the total monomer concentration (21wt%), the monomer ratio (AN: IA=98:2), the usage amount of the initiator (AIBN, 0.01wt%), the usage amount of the disperser (PVA, 0.1wt%), the polymerization temperature (70°C) and the polymerization time (2h).

The Structure of Radiation Cross-Linked Poly (ethylene oxide) Gels

1971 ◽  
Vol 29 ◽  
pp. 76-77
Author(s):  
C. E. Cluthe ◽  
G. G. Cocks
Keyword(s):  
Molecular Weight ◽  
Ethylene Oxide ◽  
Parallel Plate ◽  
Average Molecular Weight ◽  
Radical Reaction ◽  
Free Radical Reaction ◽  
Nitrogen Gas ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Initial Viscosity

Aqueous solutions of a 1 weight-per cent poly (ethylene oxide) (PEO) were degassed under vacuum, transferred to a parallel plate viscometer under a nitrogen gas blanket, and exposed to Co60 gamma radiation. The Co60 source was rated at 4000 curies, and the dose ratewas 3.8x105 rads/hr. The poly (ethylene oxide) employed in the irradiations had an initial viscosity average molecular weight of 2.1 x 106.The solutions were gelled by a free radical reaction with dosages ranging from 5x104 rads to 4.8x106 rads.

Series of sequential polypeptides containing lysine or arginine: Preparation and characterization

1988 ◽  
Vol 53 (1) ◽  
pp. 145-156 ◽  
Author(s):  
Jana Pírková ◽  
Svetlana Churkina ◽  
Vladimír Gut ◽  
Ivo Frič ◽  
Karel Bláha
Keyword(s):  
Molecular Weight ◽  
Amino Acid ◽  
Peptide Synthesis ◽  
Average Molecular Weight ◽  
Basic Amino Acid ◽  
Cd Spectra ◽  
Active Esters ◽  
Marked Tendency

The sequential polypeptides (Lys-Ala)n, (Lys-Ala-Ala)n, (Lys-Ala-Ala-Ala)n, (Lys-Leu-Ala)n, (Lys-Leu-Ala-Ala)n, (Lys-Leu-Ala-Ala-Ala)n, (Lys-Ala-Leu)n, (Lys-Ala-Leu-Ala)n, (Orn-Leu-Ala)n,(Arg-Ala-Ala)n, (Arg-Leu-Ala)n, (Arg-Leu-Ala-Ala)n, (Arg-Ala-Leu)n, and (Arg-Ala-Leu-Ala)n were synthesized by polymerization of active esters (1-succinimidyl or pentafluorophenyl) of the corresponding Nα-deblocked monomers. The monomers were prepared using the usual methods of peptide synthesis in solution. Upon dialysis, the average molecular weight of the polymer was 6 000-9 000 as determined by sedimentation in ultracentrifuge. Polypeptides, containing leucine in addition to the basic amino acid, showed a marked tendency to aggregation. CD spectra of the products were measured for characterization.

Metathesis Polymerization of Phenylacetylene by Tungsten Aryloxo Complexes

1995 ◽  
Vol 60 (3) ◽  
pp. 489-497 ◽  
Author(s):  
Hynek Balcar ◽  
Jan Sedláček ◽  
Marta Pacovská ◽  
Vratislav Blechta
Keyword(s):  
Molecular Weight ◽  
Catalytic Activity ◽  
Induction Period ◽  
Average Molecular Weight ◽  
Molar Fraction ◽  
Molar Ratio ◽  
Weight Average Molecular Weight ◽  
Polymer Yield ◽  
Positive Effect ◽  
Ligand Addition

Catalytic activity of the tungsten aryloxo complexes WCl5(OAr) and WOCl3(OAr), where Ar = 4-t-C4H9C6H4, 2,6-(t-C4H9)2C6H3, 2,6-Cl2C6H3, 2,4,6-Cl3C6H2, and 2,4,6-Br3C6H2 in polymerization of phenylacetylene (20 °C, monomer to catalyst molar ratio = 1 000) was studied. The activity of WCl5(OAr) as unicomponent catalysts increases with increasing electron withdrawing character of the -OAr ligand. Addition of two equivalents of organotin cocatalysts (Me4Sn, Bu4Sn, Ph4Sn, Bu3SnH) to WCl5(O-C6H2Cl3-2,4 ,6) has only slight positive effect (slightly higher polymer yield and/or molecular weight of poly(phenylacetylene)s was achieved). However, in the case of WOCl3(O-C6H3Cl2-2, 6) catalyst, it enhances the activity considerably by eliminating the induction period. Poly(phenylacetylene)s prepared with the catalysts studied have weight-average molecular weight ranging from 100 000 to 200 000. They are trans-prevailing and have relatively low molar fraction of monomer units comprised in cyclohexadiene sequences (about 6%).

Polysaccharides from the Flowers of Malva silvestris L., ssp. mauritiana (L.) THELL.: The Structure of D-Glucan

1992 ◽  
Vol 57 (11) ◽  
pp. 2400-2406 ◽  
Author(s):  
Peter Capek
Keyword(s):  
Molecular Weight ◽  
Ion Exchange ◽  
Average Molecular Weight ◽  
Linear Structure ◽  
Gel Chromatography ◽  
Spectroscopic Investigations ◽  
Glycosidic Bonds

The neutral polysaccharide α-D-glucan was isolated from the flowers of Malva silvestris L., ssp. mauritiana (L.) THELL. using a combination of ion exchange and gel chromatography. It was homogeneous under the conditions of free electrophoresis of average molecular weight Mn 25260. The chemical and spectroscopic investigations indicated a linear structure of the polysaccharide in which the α-D-glucopyranose units were linked predominantly by 1→6 glycosidic bonds, while some saccharides were the place of branching in position C-3.

Sign in / Sign up

Export Citation Format

Share Document