MITIGATION OF HEALTH RISKS DUE TO ROAD TRAFFIC NOISE BY THE TRANSITION TO ELECTRIC VEHICLES: A PRELIMINARY ESTIMATION IN THE URBAN AREAS

Author(s):  
Farah Elida SELAMAT ◽  
Arisa INAMURA ◽  
Junta TAGUSARI ◽  
Toshihito MATSUI
Environments ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 24 ◽  
Author(s):  
Rosa Alsina-Pagès ◽  
Robert Garcia Almazán ◽  
Marc Vilella ◽  
Marc Pons

Noise pollution is a critical factor and it has an important impact on public health, with the relationship between road traffic noise (RTN) and several illnesses in urban areas of particular concern. Andorra is currently developing a national strategy regarding noise pollution in their urban environments. The Ministry of Environment, Agriculture and Sustainability is trying to to identify, monitor, map and model the effects of noise pollution and design mitigation policies to reduce the impact in certain priority areas. This analysis should take into account the existence of different types of anomalous noise events (ANEs) present in the street, e.g., horns, people talking, music, and other events that coexist with RTN, to characterize the soundscape of each of the locations. This paper presents a preliminary analysis considering both the Signal-to-Noise Ratio (SNR) and the duration of the ANEs to evaluate their presence in urban areas in the three different locations in Andorra la Vella and Escaldes-Engordany. The experiments conducted required a 10-h recording campaign distributed in the three locations under study, which was evaluated on two different days, one during the week and the other on the weekend. Afterwards, the data were carefully labeled and the SNR of each event was evaluated to determine the potential impact of the four categories under study: vehicles, works, city life and people.


2018 ◽  
Vol 1145 ◽  
pp. 140-145
Author(s):  
Petr Kozak ◽  
Radka Matuszkova ◽  
Michal Radimsky

The noise pollution is an important factor for people living near roads. The road traffic noise is endangering the health of these residents and the quality of their lives. The tyre / road noise became the most significant source of the road traffic noise due reduced noise emissions from the vehicle propulsion system by the automotive industry. An important recent trend is increasing the traffic safety by improving anti-skid properties of roads in critical locations. Experts have concluded that some anti-skid modifications may increase the noise pollution. Because the usage of such pavements is predominantly in urban areas, problems may occur. This paper deals with the noise level of the safety anti-skid modification of the road surface used in the urban areas. Based on the presented measurement values it can be said that the RocbindaTM safety anti-skid modification does not achieve any increased acoustic performance compared to the asphalt pavement.


2021 ◽  
Vol 1 (2) ◽  
pp. 54-58
Author(s):  
Adnan Omerhodžić ◽  
Samir Džaferović

The trend of continuous increase for mobility requirements results in a progressive increase in the use of vehicles of all modes of transport, which contributes to a significant increase in noise levels, especially in urban areas. The most significant noise in urban areas is traffic noise, where road traffic contributes the most. This paper reviews the treatment of road traffic noise in the European Union with a focus on Directive 2002/49 / EC. The paper presents the basics of the mechanisms of the institutional and management framework in the field of road traffic noise monitoring in EU countries. Also, the results of road traffic noise monitoring in EU countries, indicators of population exposure to road traffic noise, as well as indicators of the impact of road traffic noise on the health of the population, were presented.


2016 ◽  
Vol 22 (1) ◽  
Author(s):  
PETROVICI ALINA ◽  
TOMOZEI CLAUDIA ◽  
NEDEFF FLORIN ◽  
IRIMIA OANA ◽  
PANAINTE-LEHADUS MIRELA

<p>This paper presents a synthesis of current state of the assessment of road traffic noise in urban areas considering economic, social and legal aspects. Therefore, there were described several prediction methods of the urban traffic noise. These methods are useful in calculating the exposure of the population at noise levels which exceed the permissible limits. Mapping is one of the most common methods used for the assessment of noise. Whether it is industrial, airport, rail or road traffic noise, noise mapping provides accurate data needed later in developing action plans against noise. The road traffic noise assessments are performed periodically, and a representative picture of the noise in the analysed areas is obtained. Then, the action plans can be developed in order to reduce road traffic noise, where it is necessary.</p>


2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Mohammad Maghrour Zefreh ◽  
Adam Torok

Road traffic noise is one of the most relevant sources in the environmental noise pollution of the urban areas where dynamics of the traffic flow are much more complicated than uninterrupted traffic flows. It is evident that different traffic conditions would play the role in the urban traffic flow considering the dynamic nature of the traffic flow on one hand and presence of traffic lights, roundabouts, etc. on the other hand. The main aim of the current paper is to investigate the effect of different traffic conditions on urban road traffic noise. To do so, different traffic conditions have been theoretically generated by the Monte Carlo Simulation technique following the distribution of traffic speed in the urban roads. The “ASJ RTN-Model” has been considered as a base road traffic noise prediction model which would deal with different traffic conditions including steady and nonsteady traffic flow that would cover the urban traffic flow conditions properly. Having generated the vehicles speeds in different traffic conditions, the emitted noise (LWA) and subsequently the noise level at receiver (LA) were estimated by “ASJ RTN-Model.” Having estimated LWA and LA for each and every vehicle in each traffic condition and taking the concept of transient noise into account, the single event sound exposure levels (SEL) in different traffic conditions are calculated and compared to each other. The results showed that decelerated traffic flow had the lowest contribution, compared to congestion, accelerated flow, free flow, oversaturated congestion, and undersaturated flow by 16%, 14%, 12%, 12%, and 10%, respectively. Moreover, the distribution of emitted noise and noise level at receiver were compared in different traffic conditions. The results showed that traffic congestion had considerably the maximum peak compared to other traffic conditions which would highlight the importance of the range of generated noise in different traffic conditions.


2020 ◽  
Vol 10 (7) ◽  
pp. 2451 ◽  
Author(s):  
Giovanni Brambilla ◽  
Roberto Benocci ◽  
Chiara Confalonieri ◽  
Hector Eduardo Roman ◽  
Giovanni Zambon

Noise energetic indicators, like Lden, show good correlations with long term annoyance, but should be supplemented by other parameters describing the sound fluctuations, which are very common in urban areas and negatively impact noise annoyance. Thus, in this paper, the hourly values of continuous equivalent level LAeqh and the intermittency ratio (IR) were both considered to describe the urban road traffic noise, monitored in 90 sites in the city of Milan and covering different types of road, from motorways to local roads. The noise data have been processed by clustering methods to detect similarities and to figure out a criterion to classify the urban sites taking into account both equivalent noise levels and road traffic noise events. Two clusters were obtained and, considering the cluster membership of each site, the decimal logarithm of the day-time (06:00–22:00) traffic flow was used to associate each new road with the clusters. In particular, roads with average day-time hourly traffic flow ≥1900 vehicles/hour were associated with the cluster with high traffic flow. The described methodology could be fruitfully applied on road traffic noise data in other cities.


2016 ◽  
Vol 858 ◽  
pp. 282-286
Author(s):  
Petr Kozak ◽  
Ondrej Dasek ◽  
Radka Matuszkova ◽  
Michal Radimsky

Current requirements for the reduction of the noise pollution in inhabited areas are constantly increasing. Acoustic wearing courses represent the real measures how to directly mitigate sources of road traffic noise created by a tire/road contact. Directly reduced noise emissions created by a tire/road contact don't need further mitigation by expensive noise barriers. Noise emissions on two different types of wearing courses of asphalt mixtures (Asphalt concrete for very thin layers and Low-noise stone mastic asphalt) were measured using the specialized device operating on the basis of CPX (Close Proximity method) and compared with the standard mixture of Asphalt concrete. Differences were between 1 dB and 5 dB depending on the wearing course and the vehicle speed. The efficiency of the low-noise asphalt pavements was also compared with the initial costs of the pavements. The economical evaluation confirmed that the initial costs of the acoustic wearing courses are higher than the costs of the standard asphalt concrete mixture. However the noise reduction by 1 dB using the asphalt concrete for very thin layers increases the costs just by 350 USD (considering the same length and width of the road segment), which makes acoustic wearing courses the economically efficient noise reducing measure.


Author(s):  
K. Kumar ◽  
H. Ledoux ◽  
T. J. F. Commandeur ◽  
J. E. Stoter

Road traffic and industrial noise has become a major source of discomfort and annoyance among the residents in urban areas. More than 44&amp;thinsp;% of the EU population is regularly exposed to road traffic noise levels over 55 dB, which is currently the maximum accepted value prescribed by the Environmental Noise Directive for road traffic noise. With continuously increasing population and number of motor vehicles and industries, it is very unlikely to hope for noise levels to diminish in the near future. Therefore, it is necessary to monitor urban noise, so as to make mitigation plans and to deal with its adverse effects. The 2002/49/EC Environmental Noise Directive aims to determine the exposure of an individual to environmental noise through noise mapping. One of the most important steps in noise mapping is the creation of input data for simulation. At present, it is done semi-automatically (and sometimes even manually) by different companies in different ways and is very time consuming and can lead to errors in the data. In this paper, we present our approach for automatically creating input data for noise simulations. Secondly, we focus on using 3D city models for presenting the results of simulation for the noise arising from road traffic and industrial activities in urban areas. We implemented a few noise modelling standards for industrial and road traffic noise in CityGML by extending the existing Noise ADE with new objects and attributes. This research is a steping stone in the direction of standardising the input and output data for noise studies and for reconstructing the 3D data accordingly.


Sign in / Sign up

Export Citation Format

Share Document