scholarly journals Comparison of NAA XRF and ICP-OES Methods on Analysis of Heavy Metals in Coals and Combustion Residues

2017 ◽  
Vol 17 (2) ◽  
pp. 228
Author(s):  
Agus Taftazani ◽  
Roto Roto ◽  
Novitasari Restu Ananda ◽  
Sri Murniasih
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Power Plant ◽  
Correlation Coefficient ◽  
Bottom Ash ◽  
Enrichment Ratio ◽  
Icp Oes ◽  
Analysis Methods ◽  
Combustion Residues

Heavy metals in the samples of coals and combustion residues (bottom ash and fly ash) from Pacitan coal-fired power plant (CPP) have been identified by using NAA, XRF, and ICP-OES methods. This research was aimed to understand the analysis results correlation coefficient (R) and determine the enrichment ratio (ER) value of the samples by using three analysis methods. The results showed 10 elements have been simultaneously detected in all samples. The correlation coefficient of analysis results of metals content in coals by using NAA-XRF, XRF-ICP OES and with ICPOES-NAA methods gives R2£1 respectively. The correlation coefficient of analysis results of metals content in bottom ash and fly ash by using the methods of NAA-XRF, XRF-ICPOES, and ICPOES-NAA gained R2»1 respectively. ICP-OES method was most satisfactory in this study. The value of ER for identified metals by using the three methods in the samples of bottom ash and fly ash yielded the value over one, and ER value of fly ash was greater in comparison to the bottom ash.

scholarly journals Leachability of Self-Compacting Concrete (SCC) Incorporated with Fly Ash and Bottom Ash by Using Toxicity Characteristic Leaching Procedure (TCLP)

2015 ◽  
Vol 773-774 ◽  
pp. 1271-1275 ◽  
Author(s):  
Aeslina Abdul Kadir ◽  
Mohd Ikhmal Haqeem Hassan ◽  
Eric Cheah Keng Yang
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Power Plant ◽  
Bottom Ash ◽  
Coal Ash ◽  
Absorption Spectrometry ◽  
Toxicity Characteristic Leaching Procedure ◽  
Self Compacting Concrete ◽  
Concrete Technology ◽  
Leaching Procedure

The process of combustion in coal fired power plant generates ashes, namely fly ash (FA) and bottom ash (BA). In addition, coal ash generated from coal combustion generally contains heavy metals within their compositions. These metals are toxic to the environment as well as to the human health. Fortunately, treatment methods are available for these ashes and the use of FA and BA in concrete mix is one of the few. As such, this study presents the work in determining the leachability of self-compacting concrete (SCC) incorporated with FA and BA. The ashes were obtained from Kapar Energy Ventures power plant in Kapar, Selangor. SCC mixtures incorporated with 10%, 20% and 30% FA (replacing cement) and BA (replacing sand) respectively was formulated and casted. The samples were then crushed to be extracted using Toxicity Characteristic Leaching Procedure (TCLP) and heavy metals content within the samples were identified accordingly using Atomic Absorption Spectrometry (AAS). From the results, it was found that incorporation up to 30% of the ashes were safe as the leached heavy metals concentration did not exceed the regulatory levels, except for arsenic (As). On the other hand, incorporation of 20% FA and BA each in SCC provided the most economically viable product, with high strength and low leachate concentrations. In conclusion, this study will serve as a reference which suggests that FA and BA are widely applicable in concrete technology and its incorporation in SCC constitutes a potential means of adding value with appropriate mix and design.

Determination of Residual Heavy Metals in an Incinerator Bottom Ash from Municipal Solid Waste Power Plant

2020 ◽  
Vol 901 ◽  
pp. 65-71
Author(s):  
Woravith Chansuvarn
Keyword(s):  
Heavy Metals ◽  
Power Plant ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Microwave Digestion ◽  
Bottom Ash ◽  
Flame Atomic Absorption ◽  
Digestion Technique ◽  
Relative Standard ◽  
Copper Zinc

Bottom ash is a part of by-product from the municipal solid waste power plants which is always a wider problem for the urban and rural communities due to its disposal plants may cause serious environmental pollution. This work was focused on the residual heavy metal in an incinerator bottom ash from the municipal waste power plant placed in Nongkham district, Bangkok. Four bottom ash samples were obtained in 2017. After drying and grounding, the bottom ash samples were prepared to clear solution with the microwave digestion technique using nitric, hydrochloric and hydrofluoric acid under the heating program. The total residual heavy metals in the incinerator bottom ashes, such as lead, copper, zinc, and cadmium were determined by using flame atomic absorption spectrophotometer (FAAS) with deuterium background correction. The total concentration of lead, copper, zinc and cadmium were found in the range of 280.40-354.22mg kg-1, 365.35-524.45 mg kg-1, 1,527.25-2,074.34 mg kg-1, and 0.48-1.02 mg kg-1, respectively. The recovery of all metals was found in the range of 89.4-101.2% and the relative standard deviation (RSD) was to be 2.15-3.55 % (n=7). The concentration of zinc, copper, and lead was found high levels, while cadmium was low concentration. Heavy metals in solid waste material occur in different chemical forms and phases. The sample preparation based on the microwave digestion was successfully developed for the waste samples with a good reliability.

Manufacture of Non-Toxic Lava from Recovery of the Incineration Ash by Plasma Fusing Technology

2011 ◽  
Vol 194-196 ◽  
pp. 2365-2375
Author(s):  
Jai Houng Leu ◽  
Li Fong Wu ◽  
Ay Su
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Dissolution Rate ◽  
Bottom Ash ◽  
Reduction Ratio ◽  
National Standards ◽  
Toxic Heavy Metals ◽  
Mixture Ratio ◽  
Sustainable Operation ◽  
The Stability

This research investigated and explored the overall technical and legal suggestions on mixed ash (bottom ash + fly ash) from the first BOT(built-operation then transfer) incineration plant in south Taoyuan of Taiwan, with the hope of serving as the reference for treating ash from urban refuse incinerator and making sustainable operation management policies in Taiwan. Both bottom ash and fly ash contain high-content harmful metals like lead, chrome, and cadmium, with the lead content exceeding standard value. Plasma fusing technology may effectively settle toxic heavy metals and reduce their dissolution rate. The results show that the increase in percentage of bottom ash could maintain post-fusing strength and produce solidification effect, but this reduced the stability of toxic heavy metals and raised their dissolution rate. Suitable mixture ratio of bottom ash and fly ash was 2:1, volume reduction ratio 0.349, and weight reduction ratio 0.4936. The mixture was fulvous and dense with gloss and adequate strength. The dissolution test of lava products complied with national standards, and they might be used for recycling aggregates and solidifying cement.

scholarly journals Stabilization of Municipal Solid Waste Fly Ash, Obtained by Co-Combustion with Sewage Sludge, Mixed with Bottom Ash Derived by the Same Plant

2020 ◽  
Vol 10 (17) ◽  
pp. 6075
Author(s):  
Ahmad Assi ◽  
Fabjola Bilo ◽  
Alessandra Zanoletti ◽  
Laura Borgese ◽  
Laura Eleonora Depero ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Sewage Sludge ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Coal Fly Ash ◽  
Bottom Ash ◽  
Solid Material ◽  
Flue Gas Desulfurization ◽  
Stabilization Method

This study presents an innovative stabilization method of fly ash derived from co-combustion of municipal solid waste and sewage sludge. Bottom ash, obtained from the same process, is used as a stabilizing agent. The stabilization method involved the use of two other components—flue gas desulfurization residues and coal fly ash. Leaching tests were performed on stabilized samples, aged in a laboratory at different times. The results reveal the reduction of the concentrations of heavy metals, particularly Zn and Pb about two orders of magnitude lower with respect to fly ash. The immobilization of heavy metals on the solid material mainly depends on three factors—the amount of used ash, the concentrations of Zn and Pb in as-received fly ash and the pH of the solution of the final materials. The inert powder, obtained after the stabilization, is a new eco-material, that is promising to be used as filler in new sustainable composite materials.

scholarly journals Leachability of Self-Compacting Concrete (SCC) Incorporated With Fly Ash and Bottom Ash by Using Static Leaching Procedure (SLT)

2015 ◽  
Vol 773-774 ◽  
pp. 1261-1265 ◽  
Author(s):  
Aeslina Abdul Kadir ◽  
Mohd Ikhmal Haqeem Hassan ◽  
Syed Khairul Hafizi bin Syed Mohamad
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Power Plants ◽  
Bottom Ash ◽  
Coal Ash ◽  
Negative Effects ◽  
Self Compacting Concrete ◽  
Aas Method ◽  
Set Up ◽  
Synthetic Acid

The growing demand for electricity resulted in the construction of many coal fired power plants. The increment of the consumption of coal by power plants lead up to production of coal ash. Coal ash contains a range of toxic elements that may have negative effects to human and environmental health. Fly ash (FA) and bottom ash (BA) are the solid residues and mostly arise from coal combustion that being disposed in large quantities every year. The focus of the study is to determine the leachability of Self-Compacting Concrete (SCC) incorporated with FA and BA by using Static Leachate Test (SLT) method. In this study, FA and BA were collected from Kapar Energy Ventures Coal Power Plant in Selangor. The characteristics of Ordinary Portland cement (OPC), FA and BA were determined by using X-Ray Fluorescent (XRF) technique. The different percentages of FA (replace cement) and BA (replace sand) which is 0%, 10%, 20% and 30% were incorporated respectively into SCC. Ten reactors were set up for the leachability test for each solid specimen by using SLT method. The concentrations of leachate samples were analyzed for selected heavy metals content by using Atomic Absorption Spectroscopy (AAS) method. After 40 days conducting the test, the concentrations of selected heavy metals (As, Mn, Cu, Cr, Zn, Ni, Fe and Pb) in the synthetic acid rain leachates from the SCC specimens were significantly lower than the limit specified by the USEPA and EPAV. Therefore, incorporating of FA and BA up to 30% into SCC is potentially feasible.

Sign in / Sign up

Export Citation Format

Share Document