The commercial mature gallium nitride high electron mobility transistors (GaN HEMT) technology has drawn much attention for its great potential in industrial power electronic applications. GaN HEMT is known for low on-state resistance, high withstand voltage, and high switching frequency. This paper presents comparative experimental evaluations of GaN HEMT and conventional Si insulated gate bipolar transistors (Si IGBTs) of similar power rating. The comparative study is carried out on both the element and converter level. Firstly, on the discrete element level, the steady and dynamic characteristics of GaN HEMT are compared with Si-IGBT, including forward and reverse conducting character, and switching time. Then, the elemental switching losses are analyzed based on measured data. Finally, on a complementary buck converter level, the overall efficiency and EMI-related common-mode currents are compared. For the tested conditions, it is found that the GaN HEMT switching loss is much less than for the same power class IGBT. However, it is worth noting that special attention should be paid to reverse conduction losses in the PWM dead time (or dead band) of complementary-modulated converter legs. When migrating from IGBT to GaN, choosing a dead-time and negative gate drive voltage in conventional IGBT manner can make GaN reverse conducting losses high. It is suggested to use 0 V turn-off gate voltage and minimize the GaN dead time in order to make full use of the GaN advantages.
A comparative study among PID structures applied on a Buck converter control
