scholarly journals Partial Replacement of Fine Aggregate by using Lead Powder and Eggshell Powder

2020 ◽  
Vol 8 (6) ◽  
pp. 249-252
Author(s):  
Thenmozhi. R
Keyword(s):  
Partial Replacement ◽  
Fine Aggregate ◽  
Lead Powder

scholarly journals Abrasion Resistance of Ultra-High-Performance Concrete for Railway Sleepers

2021 ◽  
Author(s):  
Ariful Hasnat ◽  
Nader Ghafoori
Keyword(s):  
Prestressed Concrete ◽  
Abrasion Resistance ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Positive Influence ◽  
Cementitious Material ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Ultra High Performance Concrete

AbstractThis study aimed to determine the abrasion resistance of ultra-high-performance concretes (UHPCs) for railway sleepers. Test samples were made with different cementitious material combinations and varying steel fiber contents and shapes, using conventional fine aggregate. A total of 25 UHPCs and two high-strength concretes (HSCs) were selected to evaluate their depth of wear and bulk properties. The results of the coefficient of variation (CV), relative gain in abrasion, and abrasion index of the studied UHPCs were also obtained and discussed. Furthermore, a comparison was made on the resistance to wear of the selected UHPCs with those of the HSCs typically used for prestressed concrete sleepers. The outcomes of this study revealed that UHPCs displayed excellent resistance against abrasion, well above that of HSCs. Amongst the utilized cementitious material combinations, UHPCs made with silica fume as a partial replacement of cement performed best against abrasion, whereas mixtures containing fly ash showed the highest depth of wear. The addition of steel fibers had a more positive influence on the abrasion resistance than it did on compressive strength of the studied UHPCs.

scholarly journals Design of Concrete Made with Recycled Brick Waste and Its Environmental Performance

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 463
Author(s):  
Ivan Janotka ◽  
Pavel Martauz ◽  
Michal Bačuvčík
Keyword(s):  
Building Materials ◽  
Research Process ◽  
Added Value ◽  
Recycled Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Type Ii ◽  
Natural Clays ◽  
Natural Aggregates ◽  
Standardized Parameters

In addition to the known uses of natural clays, less publication attention has been paid to clays returned to the production process. Industrially recovered natural clays such as bricks, tiles, sanitary ceramics, ceramic roofing tiles, etc., are applicable in building materials based on concrete as an artificial recycled aggregate or as a pozzolanic type II addition. In this way, the building products with higher added value are obtained from the originally landfilled waste. This paper details the research process of introducing concrete with recycled brick waste (RBW) up to the application output. The emphasis is placed on using a RBW brash as a partial replacement for natural aggregates and evaluating an RBW powder as a type II addition for use in concrete. A set of the results for an RBW is reported by the following: (a) an artificial RBW fine aggregate meets the required standardized parameters for use in industrially made concrete, (b) a RBW powder is suitable for use in concrete as industrially made type II addition TERRAMENT showing the same pozzolanic reactivity as a well-known and broadly used pozzolan-fly ash, and (c) such an RBW as aggregate and as powder are, therefore, suitable for the production of industrially made TRITECH Eco-designed ready-mixed concrete.

Strength Assesment of Asphaltic Concrete using Bitumen, Natural Fibre and Stone Dust: A Critical Review

2021 ◽  
Vol 9 (VI) ◽  
pp. 3044-3050
Author(s):  
Divesh Sharma
Keyword(s):  
Compressive Strength ◽  
Natural Fibre ◽  
Maximum Strength ◽  
Sisal Fiber ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Asphaltic Concrete ◽  
Stone Dust ◽  
Strength And Durability ◽  
Research Studies

In this review article, the usage of bitumen, sisal fiber and the sisal fiber for improving the strength parameters of concrete is discussed in detail. Numerous research studies related to the usage of bitumen, sisal fiber and stone dust are studied in detail to determine the results and outcome out of it. Previous research works showed that all, these materials were enhancing the strength and durability aspects of the concrete and depending upon the research studies certain outcomes has been drawn which are as follows. The studies related to the usage of the bitumen or asphalt in concrete so as to produce bituminous concrete or asphaltic concrete, the previous research works conclude that the maximum strength was attained at 5 percent usage of the bitumen and after further usage the general compressive strength of the concrete starts declining. The previous studies related to the usage of the sisal fiber showed that with the usage of the sisal fiber in the concrete, the strength aspects of concrete were improving and the maximum strength was obtained at 1.5 percent usage of the sisal fiber and after his the strength starts declining. Further the studies related to the usage of the stone dust showed that with the usage of stone dust as partial replacement of the natural fine aggregate the compressive strength of the concrete was improving and it was conclude that with the increase in the percentage of the stone dust, the compressive strength of the concrete was increasing.

Sign in / Sign up

Export Citation Format

Share Document