THE EFFECTIVENESS OF FLUROKSIPIR MHE 480 g/l HERBICIDES AS CONTROLLING Chromolaena odorata (L.) WEEDS ON MATURE OIL PALM

2019 ◽  
Vol 27 (3) ◽  
pp. 141-148
Author(s):  
Umiyati Umiyati ◽  
Denny Denny K
Keyword(s):  
Experimental Design ◽  
Oil Palm ◽  
Confidence Level ◽  
Block Design ◽  
Chromolaena Odorata ◽  
Treatment Control ◽  
Weed Growth ◽  
Randomized Block Design ◽  
Herbicide Treatments ◽  
Manual Weeding

Experiments have been carried out with the objective of knowing Fluroxypyr MHE 480 g/l  against weeds Chromolaena odorata L on mature oil palm. Experiments conducted in the oil palm Sagala Herang District of Subang Regency in West Java. The experimental design used was a randomized block design with four replications and seven treatments were then tested further by Duncan test at 95% confidence level. Herbicide treatments were tested , namely herbicides Fluroxypyr MHE 480 g/l  dose of 0.75 ml/l -  , of 3.0  ml/l, manual weeding and no treatment ( control ).  The research results show that the herbicide Fluroxypyr MHE 480 g/l with doses 1.5 ml / l effective and efficient pressing Chromolaena odorata weed growth of up to 12 weeks after application or three months after application. At all doses Herbicide Fluroxypyr MHE 480 g/l up to 3 MSA observations do not show symptoms of poisoning in mature oil palm

scholarly journals Weed Management in Rice under Sprinkler and Flood Irrigation Systems

2018 ◽  
Vol 36 ◽  
Author(s):  
D.B. HELGUEIRA ◽  
T. D’AVILA ROSA ◽  
L. GALON ◽  
D.S. MOURA ◽  
A.T. MARTINI ◽  
...  
Keyword(s):  
Experimental Design ◽  
Weed Management ◽  
Irrigation System ◽  
Block Design ◽  
Sprinkler Irrigation ◽  
Flood Irrigation ◽  
Irrigation Systems ◽  
Factor B ◽  
Randomized Block Design ◽  
Herbicide Treatments

ABSTRACT: This study aimed to assess the efficiency and selectivity of herbicides in rice submitted to sprinkler and flood irrigation systems. The experimental design was a randomized block design arranged in a 2 × 9 factorial scheme. Factor A consisted of irrigation systems (sprinkler and flood) and Factor B consisted of herbicide treatments (T1 - control; T2 - imazethapyr + imazapic, 75 + 25 g a.i. ha-1; T3 - imazethapyr + imazapic, 150 + 50 g a.i. ha-1; T4 - imazapic + imazapyr, 73.5 + 24.5 g a.i. ha-1; T5 - imazapic + imazapyr, 147 + 49 g a.i. ha-1; T6 - imazethapyr, 106 g a.i. ha-1; T7 - imazethapyr, 212 g a.i. ha-1; T8 - sequential application of imazethapyr + imazapic, 75 + 25 g a.i. ha-1; and T9 - sequential application of imazapic + imazapyr, 73.5 + 24.5 g a.i. ha-1). The application of imazethapyr and formulated mixtures of imazethapyr + imazapic and imazapyr + imazapic provided a control higher than 97% in flood and sprinkler irrigation systems. Herbicide selectivity is not altered in the sprinkler irrigation system when compared to the flood irrigation system.

scholarly journals OIL PALM SEED GROWTH RESPONSE WITH GIVING ORGANIC TITHONIA AND UREA FERTILIZER

2021 ◽  
Vol 46 (1) ◽  
pp. 32
Author(s):  
Fitra Syawal Harahap ◽  
Khairul Rizal ◽  
Aziddin Harahap ◽  
Iman Arman ◽  
Mulya Rafika
Keyword(s):  
Experimental Design ◽  
Leaf Area ◽  
Plant Height ◽  
Oil Palm ◽  
Block Design ◽  
Organic Fertilizer ◽  
Randomized Block Design ◽  
Seed Growth ◽  
Four Levels ◽  
The University

Seedlings which look prima is a prerequisite for the success of oil palm cultivation. Besides, because of the factors in the pre-nursery genetic, the provision of nutrients in early growth seedlings has an important role performance determine the appearance of the seedlings thoroughly. This study aims to determine the influence of the growth of oil palm seedlings at each concentration of organic fertilizer tithonia and fertilizer of urea for pre-nursery. The experiment was carried out from January to Agustus 2019 in the Experimental Garden of the Faculty of Science and Technology, the University of Labuhanbatu Rantauprapat with a height of 13 meters above sea level. The experimental design used was a Randomized Block Design with a factorial pattern that is repeated three times. The experimental design used was a Randomized Block Design with a factorial pattern that is repeated three times. The first factor includes the dose of Organic Fertilizer Tithonia (ton/ha) comprising of three standards, namely T0 = 0 ton/ha, T1 = 10 ton/ha, T2 = 20 tons/ha and the second factor was fertilizer dosage Uera which consists of four levels, namely U0 = 0 kg/ha, U1 = 100 kg/ha, T2 = 200 kg/ha, U3 = 300 kg/ha. The experimental results show that there are significant interactions of organic fertilizer Tithonia with fertilizers urea on plant height (cm) and leaf area of oil palm seedlings (cm2). Treatment of organic fertilizer tithonia 20 tons/ha with fertilizer urea 300 kg/ha yield plant height and leaf area of oil palm seedlings the best for pre-nursery. 

scholarly journals Efektivitas herbisida bentazone sodium (370 g/L) dan MCPA DMA (62 g/L) dalam mengendalikan gulma pada budidaya padi sawah

Kultivasi ◽  
2018 ◽  
Vol 17 (3) ◽  
Author(s):  
Uum Umiyati ◽  
Denny Kurniadie ◽  
Dedi Widayat ◽  
Yayan Sumekar ◽  
A. Iim
Keyword(s):  
Weed Control ◽  
Rice Field ◽  
Rice Yield ◽  
Block Design ◽  
Treatment Control ◽  
Cyperus Difformis ◽  
Randomized Block Design ◽  
Herbicide Mixture ◽  
Manual Weeding ◽  
Ludwigia Adscendens

Sari. Pengendalian gulma pada budidaya padi sawah perlu dilakukan, karena gulma dapat menyebabkan penurunan hasil padi sawah. Penelitian bertujuan untuk mengetahui keefektifan campuran  herbisida Bentazone sodium dan MCPA DMA dalam mengendalikan gulma pada budidaya padi sawah. Percobaan dilaksanakan pada bulan November sampai bulan Desember 2017 di Kecamatan Ciparay Kabupaten Bandung. Rancangan percobaan yang dilakukan yaitu Rancangan Acak Kelompok dengan tujuh perlakuan dan empat kali ulangan, percobaan yang diuji yaitu: campuran herbisida Bentazone sodium + MCPA DMA dosis 0,75 L/ha; 1 L/ha; 1,25 L/ha; 1,5 L/ha; 1,75 L/ha; penyiangan manual, dan tanpa perlakuan (kontrol). Hasil percobaan menunjukkan bahwa perlakuan campuran herbisida Bentazone Sodium + MCPA DMA 0,75 L/ha efektif mengendalikan gulma Fimbristylis miliaceae, Ludwigia adscendes, Cyperus difformis, dan Leptochloa chinensis dan tidak menimbulkan keracunan pada tanaman padi. Campuran herbisida Bentazone Sodium + MCPA DMA 0,75 L/ha – 1,75 L/ha dapat meningkatkan bobot biji kering padi.Kata Kunci: Bentazone sodium, MCPA DMA, Herbisida Campuran, PadiAbstract. Weed control in rice cultivation must be improved, because weeds can decrease rice yield. The purpose of this experiment was to quantify the effectiveness of herbicide mixture of Bentazone sodium and MCPA DMA in controlling weeds on rice field.  The experiment was conducted in Ciparay district, Bandung Regency, from September to Desember 2017. The experiment used experimental method. It used Randomized Block Design (RBD) that consisted of 7 treatments and 4 replications. The treatment was  dosage 0,75 L/ha; 1 L/ha; 1,25 L/ha; 1,5 L/ha; and 1,75 L/ha of herbicide mixture Bentazone sodium + MCPA DMA, Manual weeding, and Without treatment (control). Dosage 0,75 L/ha of herbicide mixture of Bentazone sodium + MCPA DMA effectively control weeds Fimbristylis miliaceae, Ludwigia adscendens, Cyperus difformis, and Leptochloa chinensis. Herbicide mixture of Bentazone sodium + MCPA DMA at all tested doses showed that there was no symptoms of herbicide toxication in rice crops. Herbicide mixture of Bentazone sodium + MCPA DMA at dose 0,75 L/ha – 1,75 L/ha improved dry grain weight.Keyword ; Bentazone sodium, MCPA DMA, mixture herbicide, rice

scholarly journals Pengaruh perbedaan waktu turun hujan terhadap aplikasi herbisida kalium glifosat dalam mengendalikan gulma dominan kelapa sawit

Kultivasi ◽  
2019 ◽  
Vol 18 (1) ◽  
Author(s):  
Denny Kurniadie ◽  
Yayan Sumekar ◽  
Subhan Nulkarim
Keyword(s):  
Experimental Design ◽  
Weed Control ◽  
Palm Oil ◽  
Oil Palm ◽  
Block Design ◽  
Imperata Cylindrica ◽  
Effective Rainfall ◽  
Herbicide Application ◽  
Ageratum Conyzoides ◽  
Randomized Block Design

Sari. Rendahnya produktivitas kelapa sawit salah satunya disebabkan oleh adanya kompetisi tanaman dengan gulma. Pengendalian gulma dengan herbisida kalium glifosat 660 g/L sudah banyak dilakukan dan dinilai efektif. Hambatan yang terjadi yaitu terkadang turun hujan setelah aplikasi herbisida yang menyebabkan efikasi kurang efektif. Penelitian ini bertujuan untuk mengetahui ketahanan herbisida kalium glifosat 660 g/L akibat pencucian air hujan dalam mengendalikan gulma dominan pada tanaman kelapa sawit. Penelitian dilaksanakan di Rumah Kaca Fakultas Pertanian Universitas Padjadjaran Jatinangor pada bulan Februari sampai bulan April 2018. Rancangan yang digunakan dalam penelitian ini yaitu Rancangan Acak Kelompok yang terdiri dari 7 perlakuan dan 4 ulangan. Perlakuan yang diberikan adalah waktu turun hujan setelah aplikasi herbisida kalium glifosat 660 g/L, yang terdiri dari 0, 1, 2, 3, dan 4 jam setelah aplikasi, tanpa hujan, serta tanpa aplikasi herbisida. Perlakuan diterapkan pada 6 jenis gulma, yaitu Asystasia intrusa, Imperata cylindrica, Borreria alata, Ageratum conyzoides, Paspalum conjugatum dan Setaria plicata. Hasil percobaan menunjukkan bahwa herbisida kalium glifosat 660 g/L mampu mengendalikan 5 jenis gulma yaitu I. cylindrica, A. conyzoides,  S. plicata (persentase kerusakan masing-masing 100%); B. alata (persentase kerusakan 90 – 100%); dan P. conjugatum (persentase kerusakan 51,5 – 100%); secara efektif walaupun tercuci air hujan  antara 2 – 4 jam setelah aplikasi. Herbisida kalium glifosat 660 g/L mampu mengendalikan gulma I. cylindrica (persentase kerusakan 79,6%); B. alata, dan A. conyzoides (persentase kerusakan masing-masing 100%); dengan rentang waktu kurang dari 2 jam setelah aplikasi sebelum tercuci air hujan. Kata kunci: Kelapa Sawit, gulma dominan, Kalium glifosat 660 g/L, turun hujanAbstract. The low productivity of oil palm is caused by competition between crop with weeds. Weed control with potassium glyphosate 660 g.L-1 herbicide has been done and is considered effective. Rainfall after herbicide application can be a problem because efficacy can be less effective. This study aims to determine the effect of rainfall on effectivity of potassium glyphosate 660 g.L-1 herbicide in controlling the dominant weeds of oil palm. The study was carried out at the Ciparanje Experimental Greenhouse, Faculty of Agriculture, Padjadjaran University, from February to April 2018. The experimental design used Randomized Block Design, that consisted of 7 treatments and 4 replications. The treatments were the time of rainfall after application of potassium glyphosate 660 g.L-1 herbicide. It consisted of 0, 1, 2, 3, and 4 hours after herbicide application, without rainfall, and without herbicide application. The treatment was applied to 6 types of weeds. There were Asystasia intrusa, Imperata cylindrica, Borreria alata, Ageratum conyzoides, Paspalum conjugatum, and Setaria plicata. The experimental results showed that potassium glyphosate 660 g.L-1  was able to control 5 types of weeds. There were I. cylindrica,  A. conyzoides, S. plicata (each percentage of damage was 100%); B. alata (90-100% damage percentage); P. conjugatum (51.5 – 100% damage percentage); was controlled in rainfall at 2 – 4 hours after herbicide application. Potassium glyphosate 660 g.L-1 herbicide controlled I. cylindrica (79.6% damage percentage); B. Alata and A. conyzoides (each percentage of damage was 100%); in rainfall at less than 2 hours after herbicide application.Keyword: Palm oil, Dominant Weed, Potasium Glyphosate, Rainfall

scholarly journals SULFENTRAZONE PHYTOREMEDIATION UNDER FIELD CONDITIONS

2016 ◽  
Vol 29 (1) ◽  
pp. 119-126 ◽  
Author(s):  
ALESSANDRA FERREIRA BELO ◽  
FÁBIO RIBEIRO PIRES ◽  
ROBSON BONOMO ◽  
ALBERTO CARGNELUTTI FILHO ◽  
LUIS HENRIQUE ORTELAN TENIS
Keyword(s):  
Experimental Design ◽  
Pennisetum Glaucum ◽  
Block Design ◽  
Field Conditions ◽  
Residual Effects ◽  
Control Treatment ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
Manual Weeding

ABSTRACT: Phytoremediation is a technique that has been used with increasing frequency to decontaminate soils treated with herbicides that have long-term residual effects, such as sulfentrazone. The goal was to assess phytoremediation of the herbicide sulfentrazone under field conditions by the species Canavalia ensiformis and Crotalaria juncea. The treatments consisted of combinations of the plant species C. ensiformis and C. juncea plus a control treatment (with manual weeding) and four doses of the herbicide sulfentrazone. The experimental design used herein was a split-plot randomized block design with four replicates per subplot. The treatments were kept in the field for 75 days. After this period, the experimental area was again furrowed and fertilized, considering the requirements for Pennisetum glaucum, a plant used as an indicator of the presence of sulfentrazone. Thirty-four days after sowing pearl millet, the fresh and dry shoot masses of the plants were assessed. At the end of the cycle, the plant height, stem diameter, internode length, number of leaves, number of panicles, and fresh and dry panicle masses were determined. Previous cultivation of phytoremediation species C. ensiformis and C. juncea promotes sulfentrazone remediation. C. ensiformis is the most efficient species for the decontamination of the herbicide sulfentrazone under field conditions.

Nutrients demand of cactus forage

2019 ◽  
Author(s):  
João Macedo Moreira ◽  
Aldrin Martin Pérez-Marin ◽  
Jucilene Silva Araújo ◽  
George Rodrigues Lambais ◽  
Aldo Sales
Keyword(s):  
Block Design ◽  
Nutrient Utilization ◽  
Nutrient Recovery ◽  
Fertilizer Treatment ◽  
Treatment Control ◽  
Mineral Fertilization ◽  
Randomized Block Design ◽  
Nutrient Use ◽  
Different Types ◽  
Semi Arid Region

The study aimed to evaluate the efficiency of nutrient use in three cactus forage (CF) cultivars (Opuntia stricta and Nopalea cochenillifera), 365 days after planting under different types of fertilizer in two research sites (Condado and Riachão) of the semi-arid region of Paraiba state, Brazil. The experimental design was a randomized block design with treatments in a factorial scheme (3×4), three cultivars of CF (Orelha de elefante Mexicana; Miúda; Bahiana), and four fertilizer treatment (Control; Manure; Manure with Nitrogen; Mineral fertilization) with four replications. The CF cultivars did not differ significantly in nutrient use. That means of physiological efficiency by CF cultivars were 1.62, and 2.36 kg of biomass per kg of nutrient applied in Condado and Riachão, respectively. The efficiency of nutrient recovery was 16% for the Condado, according the following order: K> P> Ca> N> C = Mg and 12% for Riachão: K> P> N> C = Ca = Mg. In the two research sites, the treatment with mineral fertilization significantly increased the efficiency use of N, P and K in comparison to the other treatments. The average for efficiency of nutrient utilization was 25% and 19% for Condado and Riachão, respectively, in the following order for Condado: K> P> N> Ca = Mg> C, and Riachão: K> P> N> C> Mg = Ca. In a CF production system aiming to obtain a yearly harvest cycle, it is necessary to replenish of K and P to maintain the nutritional balance between the soil and CF plant.

scholarly journals Weed control in corn and weed sample size for growth evaluations

2014 ◽  
Vol 32 (1) ◽  
pp. 51-59 ◽  
Author(s):  
L.B. Tavella ◽  
P.S.L. Silva ◽  
V.R. Oliveira ◽  
P.L.O. Fernandes ◽  
R.P. Sousa
Keyword(s):  
Grain Yield ◽  
Sample Size ◽  
Weed Control ◽  
Block Design ◽  
Corn Yield ◽  
Weed Growth ◽  
Randomized Block Design ◽  
Experimental Variation ◽  
Yield Values ◽  
Viable Seeds

The objectives of this study were to evaluate baby corn yield, green corn yield, and grain yield in corn cultivar BM 3061, with weed control achieved via a combination of hoeing and intercropping with gliricidia, and determine how sample size influences weed growth evaluation accuracy. A randomized block design with ten replicates was used. The cultivar was submitted to the following treatments: A = hoeings at 20 and 40 days after corn sowing (DACS), B = hoeing at 20 DACS + gliricidia sowing after hoeing, C = gliricidia sowing together with corn sowing + hoeing at 40 DACS, D = gliricidia sowing together with corn sowing, and E = no hoeing. Gliricidia was sown at a density of 30 viable seeds m-2. After harvesting the mature ears, the area of each plot was divided into eight sampling units measuring 1.2 m² each to evaluate weed growth (above-ground dry biomass). Treatment A provided the highest baby corn, green corn, and grain yields. Treatment B did not differ from treatment A with respect to the yield values for the three products, and was equivalent to treatment C for green corn yield, but was superior to C with regard to baby corn weight and grain yield. Treatments D and E provided similar yields and were inferior to the other treatments. Therefore, treatment B is a promising one. The relation between coefficient of experimental variation (CV) and sample size (S) to evaluate growth of the above-ground part of the weeds was given by the equation CV = 37.57 S-0.15, i.e., CV decreased as S increased. The optimal sample size indicated by this equation was 4.3 m².

scholarly journals Technical and Economic Viability of Wheat with Forms of Application and Doses of Boron

2018 ◽  
Vol 10 (4) ◽  
pp. 306 ◽  
Author(s):  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Salatiér Buzetti ◽  
Eduardo H. M. Boleta ◽  
Willian L. Rodrigues ◽  
...  
Keyword(s):  
Experimental Design ◽  
Block Design ◽  
Leaf Tissue ◽  
Economic Viability ◽  
No Tillage ◽  
Wheat Grain ◽  
Economic Return ◽  
Randomized Block Design ◽  
Tillage System ◽  
Irrigated Wheat

Boron is one of the most limiting micronutrients in grains production system in Brazil. In this way, the objective was to evaluate the effect of forms of application and doses of boron in irrigated wheat grain yield evaluating the economic terms in Cerrado region. The experiment was conducted in no-tillage system in an Oxisol with clay texture in Selvíria, MS, Brazil. The experimental design was a randomized block design with four replicates, arranged in a 4 × 3 factorial scheme: four doses of boron (0, 1, 2 and 4 kg ha-1) with boric acid source (B = 17%); and three apllication forms: a) in desiccation of the predecessor straw, together with herbicide; b) at the time of sowing, in soil along with the formulated fertilization seeding and c) via leaf tissue with the application of post emergent herbicide. The application of 2 kg ha-1 provides greater grain yields, but the highest economic return was obtained at the dose of 1 kg ha-1, with application in soil, ensuring profitability from production of irrigated wheat in the Cerrado.

scholarly journals Nutritional Requirement of Sugarcane Cultivars

2018 ◽  
Vol 10 (4) ◽  
pp. 361 ◽  
Author(s):  
Vinicius S. G. da Silva ◽  
Mauro W. de Oliveira ◽  
Vilma M. Ferreira ◽  
Terezinha B. A. Oliveira ◽  
Elaine R. Galvão ◽  
...  
Keyword(s):  
Experimental Design ◽  
Block Design ◽  
Nutritional Requirements ◽  
Nutritional Requirement ◽  
Sugarcane Varieties ◽  
The Past ◽  
Randomized Block Design ◽  
Productive Potential ◽  
New Varieties

Sugarcane produces a large amount of biomass, extracts and accumulates high amounts of nutrients. In the literature the nutritional requirements for most cultivated varieties in the past are found, however there is little information on the new varieties currently planted. The objective of this study was to evaluate the nutritional requirement of four sugarcane varieties, currently very planted, in the cycles of plant-cane, first and second ratoon. The study was installed in a Yellow Oxisol. The experimental design was a randomized block design, with five replications, and four treatments: RB867515, RB92579, SP813250 and VAT90212. During maturation of the cane, in the three evaluation cycles, the productivity of natural biomass and the nutritional requirement of macronutrients of the varieties were determined. It was evidenced that the cultivars of sugarcane are of high productive potential and resemble the accumulation of biomass, observing a yield of 158, 128 and 107 t ha-1 in the cycles of plant-cane, first and second ratoon. Regarding the nutritional requirement, the varieties did not differ among them and expressed the following order of need in the plant-cane K > N > Ca > Mg > S > P, in the first and second ratoon, the sequence observed was K > N > Ca > S > Mg > P.

scholarly journals Phenotypic stability and genetic gains in six-year girth growth of Hevea clones

1999 ◽  
Vol 34 (7) ◽  
pp. 1223-1232 ◽  
Author(s):  
Paulo de Souza Gonçalves ◽  
Alberto Kazutoshi Fujihara ◽  
Altino Aldo Ortolani ◽  
Ondino Cleante Bataglia ◽  
Nelson Bortoletto ◽  
...  
Keyword(s):  
Experimental Design ◽  
Regression Coefficient ◽  
Block Design ◽  
Rubber Tree ◽  
Phenotypic Stability ◽  
Plateau Region ◽  
Genetic Gains ◽  
Paulo State ◽  
Randomized Block Design ◽  
Clonal Variance

Rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell. Arg.] budgrafts of seven clones were evaluated on five contrasting sites in the plateau region of the São Paulo State, Brazil. The objective of this work was to study the phenotypic stability for girth growth. The experimental design was a randomized block design with three replications and seven treatments. Analysis of variance of girth at six-year plant growth indicated a highly significant clone x site interaction. Only linear sites and clone x site components of clone x year interaction were significant, indicating that the performance of clones over sites for this trait could be predicted. The clones GT 1 and PB 235 showed the greatest stability in relation to girth growth, with foreseen responses to change, introduced in the sites. The clones PB 235 and IAN 873 showed significative difference in relation to regression coefficient, representing clones with specific adaptability on favorable and unfavorable sites respectively. The clone GT 1 became the most promissory one in the study of stability and adaptability even showing low girth growth. Expected genetic gains from planting sites, along with estimates of clonal variance and repeatability of clonal means are generally greatest or close to the greatest when selection is done at the same site.

Sign in / Sign up

Export Citation Format

Share Document