scholarly journals Simple and extraction-free spectrophotometric methods for risperidone in pure form and in dosage forms

2013 ◽  
Vol 19 (1) ◽  
pp. 121-128 ◽  
Author(s):  
Hemavathi Deepakumari ◽  
Shiramahally Mallegowda ◽  
Kanakapura Vinay ◽  
Hosakere Revanasiddappa
Keyword(s):  
Limit Of Detection ◽  
Ion Pairs ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Standard Addition ◽  
Bromophenol Blue ◽  
Phenol Red ◽  
Spectrophotometric Methods ◽  
Accuracy And Precision

Two simple, sensitive and extraction-free spectrophotometric methods are described for the estimation of risperidone (RSP) in both pure and in pharmaceutical preparations. The proposed methods are based on the formation of ion-pair complex between RSP and the dyes, bromophenol blue (BPB) in method A and Phenol red (PR) in method B at room temperature to form yellow colored products which show maximum absorbance at 410 and at 400 nm in methods A and B, respectively. Beer's law was obeyed in the concentration range of 0.5-10 and 0.5-25 ?g mL-1 in methods A and B with apparent molar absorptivities of 3.43 ? 104 and 0.85 ? 104 L moL-1 cm-1, respectively. The limit of detection for method A is found to be 0.0056 and for method B is 0.132 ?g mL-1. The composition of the ion-pairs was established by Job?s method and it was found to be 1:1 for both the methods A and B. The proposed methods have been applied successfully to the determination of RSP in pharmaceutical preparations. The results were statistically compared with those of a reference method by applying the Student?s t-test and F-test. The methods developed were validated for accuracy and precision by performing recovery experiments via standard addition technique.

scholarly journals Of bromination reaction for the spectrophotometric assay of domperidone in pharmaceuticals

2011 ◽  
Vol 17 (1) ◽  
pp. 81-89 ◽  
Author(s):  
Zenita Devi ◽  
K. Basavaiah ◽  
K.B. Vinay
Keyword(s):  
Limit Of Detection ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Standard Addition ◽  
Limit Of Quantification ◽  
Fixed Amount ◽  
Spectrophotometric Methods ◽  
Significant Difference ◽  
Bulk Drug

Three simple and sensitive spectrophotometric methods are described for the determination of domperidone (DOM) in bulk drug and in dosage forms using bromate-bromide mixture as brominating agent in acid medium and three dyes, meta-cresol purple (MCP), amaranth (AMR) and erioglaucine (EGC). The methods involve the addition of a known excess of bromate-bromide mixture to an acidified solution of DOM followed by the determination of the residual bromine by reacting with a fixed amount of either MCP dye and measuring the absorbance at 530 nm (method A) or AMR dye and measuring the absorbance at 520 nm (method B) or EGC dye and measuring the absorbance at 630 nm (method C). Beer?s law is obeyed over the concentration ranges, 0.63 - 10.0, 0.25-4.0 and 0.13-2.0 ?g mL-1 for method A, method B and method C, respectively. The apparent molar absorptivities are calculated to be 3.751 ? 104, 6.604 ? 104 and 1.987 ? 105 L mol-1cm-1 for method A, method B and method C, respectively and the corresponding sandell sensitivity values are 0.011, 0.006 and 0.002 ?g cm-2. The limit of detection and the limit of quantification are also reported for all the three methods. No interference was observed from common additives found in pharmaceutical preparations. Statistical comparisons of the results with those of the reference method showed an excellent agreement, and indicated no significant difference in accuracy and precision. The accuracy and reliability of the methods were further ascertained by performing recovery tests via standard-addition technique.

scholarly journals Spectrophotometric Determination of Zidovudine in Pharmaceuticals Based on Charge-Transfer Complexation Involving N-Bromosuccinimide, Metol and Sulphanilic Acid as Reagents

2007 ◽  
Vol 4 (2) ◽  
pp. 173-179 ◽  
Author(s):  
K. Basavaiah ◽  
U. R. Anil Kumar
Keyword(s):  
Limit Of Detection ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Standard Addition ◽  
Molar Absorptivity ◽  
Sulphanilic Acid ◽  
Bulk Drug ◽  
Student’S T ◽  
Charge Transfer Complexation

A simple spectrophotometric method is proposed for the determination of zidovudine(ZDV) in bulk drug and in pharmaceutical preparations. The method is based on the oxidation of ZDV by a known excess of oxidant N-bromosuccinimide (NBS), in buffer medium of pH 1.5, followed by the estimation of unreacted amount of oxidant with metol and sulphanilic acid. The reacted oxidant corresponds to the amount ZDV. The purple-red reaction product absorbs maximally at 530 nm and Beer’s law is obeyed over a range 5 to 75 μg mL-1. The apparent molar absorptivity is calculated to be 5.1×103L mol-1cm-1, and the corresponding Sandell sensitivity value is 0.052 μg cm-2. The limit of detection and quantification are found to be 0.90 and 2.72, respectively. Intra-day and inter-day precision and accuracy of the developed methods were evaluated as per the current ICH guidelines. The method was successfully applied to the assay of ZDV in tablet/capsule preparations and the results were statistically compared with those of the reference method by applying the Student’s t-test and F-test. No interference was observed from the common tablet/capsule excipients. The accuracy of the method was further ascertained by performing recovery studies via standard-addition method.

scholarly journals Cerimetric determination of simvastatin in pharmaceuticals based on redox and complex formation reactions

2018 ◽  
Vol 33 (2) ◽  
pp. 21
Author(s):  
Kanakapura Basavaiah ◽  
Okram Zenita Devi
Keyword(s):  
Limit Of Detection ◽  
Reference Method ◽  
Standard Addition ◽  
Molar Absorptivity ◽  
Experimental Conditions ◽  
Spectrophotometric Methods ◽  
Fixed Quantity ◽  
Bulk Drug ◽  
Student’S T

Two sensitive spectrophotometric methods are described for the determination of simvastatin (SMT) in bulk drug and in tablets. The methods are based on the oxidation of SMT by a measured excess of cerium (IV) in acid medium followed by determination of unreacted oxidant by two different reaction schemes. In one procedure (method A), the residual cerium (IV) is reacted with a fixed concentration of ferroin and the increase in absorbance is measured at 510 nm. The second approach (method B) involves thereduction of the unreacted cerium (IV) with a fixed quantity of iron (II), and the resulting iron (III) is complexed with thiocyanate and the absorbance measured at 470 nm. In both methods, the amount of cerium (IV) reacted corresponds to SMT concentration. The experimental conditions for both methods were optimized. In method A, the absorbance is found to increase linearly with SMT concentration (r = 0.9995) whereas in method B, the same decreased (r = -0.9943). The systems obey Beer’s law for 0.6-7.5 and 0.5-5.0 μg mL-1 for method A and method B, respectively. The calculated molar absorptivity values are 2.7 X 104 and 1.06 X 105 Lmol-1 cm-1, respectively; and the corresponding sandel sensitivity values are 0.0153 and 0.0039μg cm-2, respectively. The limit of detection (LOD) and quantification (LOQ) are reported for both methods. Intra-day and inter-day precision, and accuracy of the methods were established as per the current ICH guidelines. The methods were successfully applied to the determination of SMT in tablets and the results were statistically compared with those of the reference method by applying the Student’s t-test and F-test. No interference was observed from the common excipients added to tablets. The accuracy and validity of the methods were further ascertained by performing recovery experiments via standard addition procedure.

scholarly journals Development of membrane electrodes for selective determination of lisinopril in pharmaceuticals

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Nagaraju Rajendraprasad ◽  
Kanakapura Basavaiah
Keyword(s):  
Enzyme Inhibitor ◽  
Limit Of Detection ◽  
Low Cost ◽  
Ion Pairs ◽  
Standard Addition ◽  
Phosphomolybdic Acid ◽  
Selective Determination ◽  
Accuracy And Precision ◽  
Selective Membrane

Abstract Background Lisinopril (LNP) is an angiotensin-converting enzyme inhibitor used as anti-hypertensive, cardiovascular, in anti-prophylactic and anti-diabetic nephropathy drug. Development of two new, simple, low cost, and selective membrane-based ion-selective electrodes has been proposed for the determination of LNP in pharmaceuticals. Methods The electrodes are based on poly(vinyl)chloride membrane doped with LNP-phosphotungstic acid (LNP-PTA) and LNP-phosphomolybdic acid (LNP-PMA) ion-pairs as molecular recognition materials. Results The developed LNP-PTA and LNP-PMA electrodes are applicable for the determination of LNP over the linear range of 5 × 10−5–2.4 × 10−3 mol l−1. The working pH ranges to measure potentials were 2.5 to 6.4 and 2.3 to 6.0 for LNP-PTA and LNP-PMA ISEs, respectively. The electrodes displayed the rapid Nernstian responses as revealed by the values of slopes 55.06 and 52.39 mV/decade, with limit of detection (LOD) values of 1.2 × 10−5 and 1.18 × 10−5 mol l−1 for LNP-PTA and LNP-PMA electrodes, respectively. The limits of quantitation (LOQ) values have also been calculated for both the electrodes. The developed electrodes have potential stability for up to 1 month and emerged as highly selective for the determination of LNP over other spiked ions and compounds. Conclusions The proposed electrodes have been validated and found that they are suitable for the determination of LNP in pharmaceuticals in pure form and in dosage forms. The results obtained in the analysis of LNP using proposed electrodes have been compared statistically with reference method’s results to assess the accuracy and precision. Robustness and ruggedness of the developed electrodes have also been checked and found satisfactory. The recovery studies have been performed by standard addition procedure to assess the role of excipients in tablets containing LNP and the results obtained are satisfactory.

scholarly journals Simple and sensitive spectrophotometric methods for the determination of acebutolol hydrochloride in bulk sample and pharmaceutical preparations

2018 ◽  
Vol 33 (2) ◽  
pp. 37
Author(s):  
D. H. Manjunatha ◽  
S. M. T. Shaikh ◽  
K. Harikrishna ◽  
R. Sudhirkumar ◽  
Pradeep B. Kandagal ◽  
...  
Keyword(s):  
Complex Formation ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Bulk Sample ◽  
Bromothymol Blue ◽  
Bromocresol Green ◽  
Direct Extraction ◽  
Spectrophotometric Methods ◽  
Accuracy And Precision

A direct, extraction-free spectrophotometric method has been developed for the determination of acebutolol hydrochloride (ABH) in pharmaceutical preparations. The method is based on ionpair complex formation between the drug and two acidic dyes (sulphonaphthalein) namely bromocresol green (BCG) and bromothymol blue (BTB). Conformity to Beer’s law enabled the assay of the drug in the range of 0.5-13.8 μg mL-1 with BCG and 1.8-15.9 μg mL-1 with BTB. Compared with a reference method, the results obtained were of equal accuracy and precision. In addition, these methods were also found to be specific for the analysis of acebutolol hydrochloride in the presence of excipients, which are co-formulated in the drug.

scholarly journals Titrimetric and Spectrophotometric Assay of Oxcarbazepine in Pharmaceuticals Using N-Bromosuccinimide and Bromopyrogallol Red

2011 ◽  
Vol 2011 ◽  
pp. 1-8
Author(s):  
Nagaraju Rajendraprasad ◽  
Kanakapura Basavaiah ◽  
Kanakapura B. Vinay
Keyword(s):  
Spectrophotometric Method ◽  
Reference Method ◽  
Standard Addition ◽  
Molar Absorptivity ◽  
Spectrophotometric Methods ◽  
Bromopyrogallol Red ◽  
Accuracy And Precision ◽  
Significant Difference ◽  
Comparison Of The Results

Titrimetric and spectrophotometric methods are described for the determination of oxcarbazepine (OXC) in bulk drug and in tablets. The methods use N-bromosuccinimide (NBS) and bromopyrogallol red (BPR) as reagents. In titrimetry (method A), an acidified solution of OXC is titrated directly with NBS using methyl orange as indicator. Spectrophotometry (method B) involves the addition of known excess of NBS to an acidified solution of OXC followed by the determination of the unreacted NBS by reacting with BPR and measuring the absorbance of the unreacted dye at 460 nm. Titrimetry allows the determination of 6–18 mg of OXC and follows a reaction stoichiometry of 1 : 1 (OXC : NBS), whereas spectrophotometry is applicable over the concentration range of 0.8–8.0 μg mL-1. Method B with a calculated molar absorptivity of2.52×104 L mol-1 cm-1is the most sensitive spectrophotometric method ever developed for OXC. The optical characteristics such as limits of detection (LOD), quantification (LOQ), and Sandell's sensitivity values are also reported for the spectrophotometric method. The accuracy and precision of the methods were studied on intraday and interday basis. The methods described could usefully be applied to routine quality control of tablets containing OXC. No interference was observed from common pharmaceutical adjuvants. Statistical comparison of the results with a reference method shows an excellent agreement and indicates no significant difference in accuracy and precision. The reliability of the methods was further ascertained by recovery studies in standard addition procedure.

scholarly journals TITRIMETRIC AND SPECTROPHOTOMETRIC ASSAY OF BUPROPION HYDROCHLORIDE IN PHARMACEUTICALS USING MERCURY(II) NITRATE

2018 ◽  
Vol 35 (3) ◽  
pp. 09
Author(s):  
M. A. Sameer Abdulaziz ◽  
K. Basavaiah ◽  
K. B. Vinay
Keyword(s):  
Good Accuracy ◽  
Pharmaceutical Preparations ◽  
Standard Addition ◽  
Chloride Content ◽  
Bromophenol Blue ◽  
Fixed Amount ◽  
Titrimetric Method ◽  
Accuracy And Precision ◽  
Reaction Stoichiometry

Two simple, rapid and accurate methods for the determination of bupropion hydrochloride (BUP) in pure and in pharmaceutical preparations are described. Both methods are based on the measurement of the chloride of its hydrochloride. In the titrimetric method, the chloride content of bupropion hydrochloride is determined by titrating with mercury(II)nitrate using diphenylcarbazone–bromophenol blue as indicator. Titrimetric method is applicable over a range 2–20 mg of BUP and the reaction stoichiometry is found to be 2:1 (BUP: Hg(NO3)2).The spectrophotometric method involves the addition of a measured excess of mercury(II) nitrate reagent in formate buffer to the drug, and after ensuring the reaction had gone to completion, the unreacted mercury(II) is treated with a fixed amount of diphenylcarbazone, and absorbance measured at 515 nm. The absorbance is found to decrease linearly with increasing concentration of BUP and the calibration curve is linear over 1.0–15.0 μg mL–1 BUP. The proposed methods were successfully applied to the determination of BUP in commerciallyavailable dosage forms with good accuracy and precision, and without  detectable interference by excipients. The accuracy was further ascertained by placebo blank and synthetic mixture analyses and also by recovery experiments via standard-addition procedure.

scholarly journals SPECTROPHOTOMETRIC METHODS FOR DETERMINATION OF SOFOSBUVIR AND DACLATASVIR IN PURE AND DOSAGE FORMS

2021 ◽  
pp. 112-119
Author(s):  
MONIR Z. SAAD ◽  
ATEF AMER ◽  
KHALED ELGENDY ◽  
BASEM ELGENDY
Keyword(s):  
Indigo Carmine ◽  
Reference Method ◽  
Standard Addition ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Experimental Conditions ◽  
Fixed Amount ◽  
Alizarin Red ◽  
Spectrophotometric Methods

Objective: Two simple, sensitive and accurate spectrophotometric methods have been developed for the determination of sofosbuvir (SOF) and daclatasvir (DAC) in pure forms and pharmaceutical formulations. Methods: The proposed methods are based on the oxidation of SOF and DAC by a known excess of cerium(IV) ammonium nitrate in sulphuric acid medium followed by determination of unreacted cerium(IV) by adding a fixed amount of indigo carmine (IC) and alizarin red S (ARS) dyes followed by measuring the absorbance at 610 and 360 nm, respectively. The experimental conditions affecting the reaction were studied and optimized. Results: The beer’s law was obeyed in the concentration ranges of 0.2-3.0, 0.2-4.0 for SOF and 0.5-4.5 and 0.5-5.0 μg/ml for DAC using IC and ARS methods, respectively with a correlation coefficient ≥ 0.9991. The calculated molar absorptivity values are 2.354 × 104, 1.933 × 104 for SOF and 1.786 × 104 and 2.015 × 104 L/mol. cm for DAC using IC and ARS methods, respectively u. The limits of detection and quantification are also reported. Intra-day and inter-day precision and accuracy of the methods have been evaluated. Conclusion: The methods were successfully applied to the assay of SOF and DAC in tablets and the results were statistically compared with those of the reference method by applying Student’s t-test and F-test. No interference was observed from the common tablet excipients. The accuracy and reliability of the methods were further ascertained by performing recovery studies using the standard addition method.

scholarly journals Simultaneous Determination of Hyoscine Butylbromide and Ketoprofen in Pharmaceutical Preparations by Spectrophotometric and Liquid Chromatographic Methods

2007 ◽  
Vol 90 (1) ◽  
pp. 102-112 ◽  
Author(s):  
Yasser Shaker El-Saharty ◽  
Fadia H Metwally ◽  
Mohamed Refaat ◽  
Sonia Zaki El-Khateeb
Keyword(s):  
Pharmaceutical Preparations ◽  
Standard Addition ◽  
Reversed Phase ◽  
Reversed Phase Liquid Chromatography ◽  
Hyoscine Butylbromide ◽  
Mathematical Algorithm ◽  
Accuracy And Precision ◽  
Phase Liquid ◽  
Liquid Chromatographic

Abstract A binary mixture of hyoscine butylbromide and ketoprofen was determined by 4 different methods. The first involved determination of hyoscine butylbromide and ketoprofen using the ratio-spectra first-derivative spectrophotometric technique at 211 and 234 nm over the concentration ranges of 2-14 and 5-45 μg/mL with mean accuracies 99.84 ± 0.92 and 99.98 ± 0.64%, respectively. The second method utilized second-derivative spectrophotometry over the concentration ranges of 2-14 and 5-35 μg/mL with mean accuracies 99.32 ± 1.06 and 99.55 ± 1.15%, respectively. The third method was based on the resolution of the 2 components by bivariate calibration depending on a simple and rapid mathematical algorithm and quantitative evaluation of the absorbances at 206 and 254 nm over concentration ranges of 2-16 and 5-35 μg/mL; mean accuracies of 100.21 ± 1.30 and 100.19 ± 1.07% were obtained for hyoscine butylbromide and ketoprofen, respectively. The fourth method was reversed-phase liquid chromatography using 0.05 M ammonium dihydrogen phosphateacetonitrilemethanol (20 + 30 + 6, v/v) as the mobile phase with ultraviolet detection at 220 nm over concentration ranges of 1-90 and 5-70 μg/mL; mean accuracies were 99.92 ± 1.02 and 99.61 ± 0.98%, respectively. The suggested procedures were checked using laboratory-prepared mixtures and were successfully applied for the analysis of pharmaceutical preparations. The methods retained their accuracy and precision when the standard addition technique was applied. The results obtained by applying the proposed methods were statistically analyzed and compared with those obtained by the manufacturer's method.

scholarly journals Kinetic Spectrophotometric Determination of Gemifloxacin Mesylate and Moxifloxacin Hydrochloride in Pharmaceutical Preparations Using 4-Chloro-7-nitrobenzo-2-oxa-1,3-diazole

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Mohammed G. Abdel Wahed ◽  
Ragaa El Sheikh ◽  
Ayman A. Gouda ◽  
Sayed Abou Taleb
Keyword(s):  
Limit Of Detection ◽  
Kinetic Method ◽  
Pharmaceutical Preparations ◽  
Fixed Time ◽  
Spectrophotometric Methods ◽  
Relative Standard ◽  
Significant Difference ◽  
Kinetic Spectrophotometric ◽  
Comparison Of The Results

Simple, sensitive, and accurate kinetic spectrophotometric method was proposed for the determination of gemifloxacin mesylate (GMF) and moxifloxacin hydrochloride (MOX) in pure forms and pharmaceutical preparations (tablets). The method is based on coupling the studied drugs with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) in the presence of alkaline borate buffer. Spectrophotometric measurement was achieved by recording the absorbance at 466 and 464 nm for GMF and MOX, respectively, after a fixed time of 20 and 15 min on a water bath adjusted at 70 ± 5°C for both drugs. The different experimental parameters affecting the development and stability of the color were carefully studied and optimized. The absorbance-concentration plots were linear over the ranges 0.5–8.0 and 2.0–12 μg mL−1for GMF and MOX, respectively. The limit of detection of the kinetic method was about 0.12 (2.47 × 10−7 M) and 0.36 (8.22 × 10−7 M) μg mL−1for GMF and MOX, respectively. The proposed methods have been applied and validated successfully with percentage relative standard deviation (RSD% ≤ 0.52) as precision and percentage relative error (RE% ≤ 1.33) as accuracy. The robustness of the proposed method was examined with recovery values that were 97.5–100.5 ± 1.3–1.9%. Statistical comparison of the results with the reference spectrophotometric methods shows excellent agreement and indicates no significant difference in accuracy or precision.

Sign in / Sign up

Export Citation Format

Share Document