scholarly journals Mixed convection of functionalized DWCNT-water nanofluid in baffled lid-driven cavities

2018 ◽  
Vol 22 (6 Part A) ◽  
pp. 2503-2514 ◽  
Author(s):  
Esfe Hemmat ◽  
Arani Abbasian ◽  
Wei-Mon Yan ◽  
Alireza Aghaie ◽  
Masoud Afrand ◽  
...  
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Minimum Length ◽  
Convection Flow ◽  
Flow And Heat Transfer ◽  
Inclination Angles ◽  
Nanoparticles Volume Fraction

The present study aims to evaluate the mixed convection flow and heat transfer of functionalized DWCNT/water nanofluids with variable properties in a cavity having hot baffles. The investigation is performed at different nanoparticles volume fraction including 0, 0.0002, 0.001, 0.002, and 0.004, Richardson numbers ranging from 0.01 to 100, inclination angles ranging from 0 to 60? and at constant Grashof number of 104. The results presented as streamlines and isotherms plot and Nusselt number diagrams. According to the finding with increasing nanoparticles volume fraction and distance between the left hot baffles of nanoparticles average Nusselt number enhances for all considered Richardson numbers and cavity inclination angles. Also with increasing Richardson number, the rate of changes of average Nusselt number increase with increasing distance between the left hot baffles. For example, at Richardson number of 0.01, by increasing L1 from 0.4 to 0.6, the average Nusselt number increases 7%; while for similar situation at Richardson number of 0.1, 1.0, and 10, the average Nusselt number increases, respectively, 17%, 24%, and 26%. At all Richardson numbers, the maximum value of average Nusselt number is achieved for a minimum length of left baffles. <br><br><font color="red"><b> This article has been corrected. Link to the correction <u><a href="http://dx.doi.org/10.2298/TSCI190203032E">10.2298/TSCI190203032E</a><u></b></font>

scholarly journals Mixed convection inside nanofluid filled rectangular enclosures with moving bottom wall

2011 ◽  
Vol 15 (3) ◽  
pp. 889-903 ◽  
Author(s):  
Mostafa Mahmoodi
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Flow And Heat Transfer ◽  
Simpler Algorithm ◽  
Horizontal Wall

The mixed convection fluid flow and heat transfer in lid-driven rectangular enclosures filled with the Al2O3-water nanofluid is investigated numerically. The left and the right vertical walls as well as the top horizontal wall of the enclosure are maintained at a constant cold temperature Tc. The bottom horizontal wall of the enclosure, which moves from left to right, is kept at a constant hot temperature Th, with Th>Tc. The governing equations written in terms of the primitive variables are solved using the finite volume method and the SIMPLER algorithm. Using the developed code, a parametric study is performed and the effects of the Richardson number, the aspect ratio of the enclosure and the volume fraction of the nanoparticles on the fluid flow and heat transfer inside the enclosure are investigated. The results show that at low Richardson numbers, a primary counterclockwise vortex is formed inside the enclosure. More over it is found that for the range of the Richardson number considered, 10-1-101, the average Nusselt number of the hot wall, increases with increasing the volume fraction of the nanoparticles. Also it is observed that the average Nusselt number of the hot wall of tall enclosures is more that to that of the shallow enclosures.

A Numerical Investigation of Laminar Mixed Convection Flow and Heat Transfer in a Lid Driven Cavity with Two Cylinders

2015 ◽  
Vol 789-790 ◽  
pp. 282-286 ◽  
Author(s):  
Khalil Khanafer ◽  
M. El Haj Assad
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Convection Flow ◽  
Mixed Convection Flow ◽  
Driven Cavity ◽  
Flow And Heat Transfer ◽  
The Impact

Mixed convection flow and heat transfer characteristics in a lid-driven cavity with two isothermally heated circular cylinders inside are studied numerically using a finite element formulation based on the Galerkin method of weighted residuals. The top lid of the cavity is moving rightwards with a constant speed. The two cylinders are maintained at an isothermal hot temperature, while the walls of the cavity are maintained at a cold temperature. Comparisons of streamlines, isotherms and average Nusselt number are presented to show the impact of the Richardson number, non-dimensional radius of the cylinder, and the location of the cylinders on the transport phenomena within the cavity. The results of this investigation show that the presence of the cylinders results in an increase in the average Nusselt number compared with a case with no cylinder. The average Nusselt number increases with an increase in the Richardson number for all non-dimensional radius of the cylinder studied in this work. It is seen that changing the boundary condition on one of the cylinders from isothermal to adiabatic has minimal effect on the average Nusselt number around the walls of the cavity.

scholarly journals Mixed convection in an eccentric annulus filled by copper nanofluid

2016 ◽  
Vol 20 (5) ◽  
pp. 1597-1608 ◽  
Author(s):  
Wael El-Maghlany ◽  
Elazm Abo ◽  
Ali Shahata ◽  
Yehia Eldrainy
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Numerical Study ◽  
Solid Volume Fraction ◽  
Convection Flow ◽  
Numerical Work ◽  
Remarkable Effect

A numerical study of mixed convection flow and heat transfer of Copper (Cu)-water nanofluid inside an eccentric horizontal annulus is presented. The inner and outer cylinders are kept at constant temperatures as Th and Tc, respectively. The inner cylinder rotates to generate the forced convection effect. The numerical work was carried out using an in-house CFD code written in FORTRAN. Different scenarios were explored to explain the effects of different parameters on the studied problem. These parameters are Richardson number, eccentricity ratio, and solid volume fraction. The range of the Richardson number Ri, solid volume fraction of the nanoparticles ?, and the eccentricity ratioe, are 0.01 ? Ri ? 100 (natural convection), 0 ? ? ? 0.05, 0 ? e ? 0.9 respectively. All results were performed with thermal Grashof number Gr, and radius ratio Rr, equaled to 104 and 2, respectively. The effects of eccentricity, nanoparticles volume fraction, and Richardson number on the average Nusselt number, streamlines and isotherms were investigated. Results were discussed, and were found to be in good agreement with previous works. It was also found that, the eccentricity has a positive remarkable effect on the average Nusselt number, while the effect of nanoparticles concentration was more pronounced at mixed convection region (Ri=1).

Effect of Nanofluid on Heat Transfer Enhancement for Mixed Convection Flow Over a Corrugated Surface

2020 ◽  
Vol 45 (4) ◽  
pp. 373-383
Author(s):  
Nepal Chandra Roy ◽  
Sadia Siddiqa
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Local Nusselt Number ◽  
Richardson Number ◽  
Thermal Boundary Layer ◽  
Volume Fraction ◽  
Convection Flow ◽  
Mixed Convection Flow

AbstractA mathematical model for mixed convection flow of a nanofluid along a vertical wavy surface has been studied. Numerical results reveal the effects of the volume fraction of nanoparticles, the axial distribution, the Richardson number, and the amplitude/wavelength ratio on the heat transfer of Al2O3-water nanofluid. By increasing the volume fraction of nanoparticles, the local Nusselt number and the thermal boundary layer increases significantly. In case of \mathrm{Ri}=1.0, the inclusion of 2 % and 5 % nanoparticles in the pure fluid augments the local Nusselt number, measured at the axial position 6.0, by 6.6 % and 16.3 % for a flat plate and by 5.9 % and 14.5 %, and 5.4 % and 13.3 % for the wavy surfaces with an amplitude/wavelength ratio of 0.1 and 0.2, respectively. However, when the Richardson number is increased, the local Nusselt number is found to increase but the thermal boundary layer decreases. For small values of the amplitude/wavelength ratio, the two harmonics pattern of the energy field cannot be detected by the local Nusselt number curve, however the isotherms clearly demonstrate this characteristic. The pressure leads to the first harmonic, and the buoyancy, diffusion, and inertia forces produce the second harmonic.

scholarly journals Mixed Convection and Entropy Generation of an Ag-Water Nanofluid in an Inclined L-Shaped Channel

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1150 ◽  
Author(s):  
Taher Armaghani ◽  
Muneer Ismael ◽  
Ali Chamkha ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Richardson Number ◽  
Volume Fraction ◽  
Governing Equations ◽  
Nanoparticles Volume Fraction ◽  
The Mean ◽  
The Right ◽  
Volume Method

This paper investigates the mixed convection and entropy generation of an Ag-water nanofluid in an L-shaped channel fixed at an inclination angle of 30° to the horizontal axis. An isothermal heat source was positioned in the middle of the right inclined wall of the channel while the other walls were kept adiabatic. The finite volume method was used for solving the problem’s governing equations. The numerical results were obtained for a range of pertinent parameters: Reynolds number, Richardson number, aspect ratio, and the nanoparticles volume fraction. These results were Re = 50–200; Ri = 0.1, 1, 10; AR = 0.5–0.8; and φ = 0.0–0.06, respectively. The results showed that both the Reynolds and the Richardson numbers enhanced the mean Nusselt number and minimized the rate of entropy generation. It was also found that when AR. increased, the mean Nusselt number was enhanced, and the rate of entropy generation decreased. The nanoparticles volume fraction was predicted to contribute to increasing both the mean Nusselt number and the rate of entropy generation.

Laminar Mixed Convection of Non-Newtonian Nanofluids Flowing Vertically Upward Across a Confined Circular Cylinder

2018 ◽  
Vol 10 (4) ◽  
Author(s):  
Abhipsit Kumar Singh ◽  
Nanda Kishore
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Circular Cylinder ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Numerical Results ◽  
Total Drag ◽  
Drag Coefficients

Numerical results on laminar mixed convective heat transfer phenomenon between a confined circular cylinder and shear-thinning type nanofluids are presented. The cylinder is placed horizontally in a confined channel through which nanofluids flow vertically upward. The effect of buoyancy is same as the direction of the flow. Because of existence of mixed convection, governing continuity, momentum, and energy equations are simultaneously solved within the limitations of Boussinesq approximation. The ranges of parameters considered are: volume fraction of nanoparticles, ϕ = 0.005–0.045; Reynolds number, Re = 1–40; Richardson number, Ri = 0–40; and confinement ratio of circular cylinder, λ = 0.0625–0.5. Finally, the effects of these parameters on the streamlines, isotherm contours, individual and total drag coefficients, and local and average Nusselt numbers are thoroughly delineated. The individual and total drag coefficients decrease with the increasing both ϕ and Re; and/or with the decreasing both Ri and λ. The rate of heat transfer increases with the increasing Re, ϕ, Ri, and λ; however, at Re = 30–40, when ϕ > 0.005 and Ri < 2, the average Nusselt number decreases with the increasing Richardson number. Finally, correlations for the total drag coefficient and average Nusselt number are proposed as functions of pertinent dimensionless parameters on the basis of present numerical results.

Mixed Convection in a Cubical Cavity With Active Lateral Walls and Filled With Hybrid Graphene–Platinum Nanofluid

2019 ◽  
Vol 11 (4) ◽  
Author(s):  
Ahmed Kadhim Hussein ◽  
Lioua Kolsi ◽  
Mohammed A. Almeshaal ◽  
Dong Li ◽  
Hafiz Muhammad Ali ◽  
...  
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Cold Temperature ◽  
Hybrid Nanofluid ◽  
Cubical Cavity ◽  
Lateral Walls

The mixed convection in a cubical cavity with active lateral walls and filled with a graphene–platinum hybrid nanofluid was investigated numerically and exclusively in the present paper. The lateral left and back sidewalls were kept at a hot temperature (Th), while the lateral right and front sidewalls were kept at a cold temperature (Tc). Both the top and bottom walls were assumed thermally insulated. The top wall of the cavity was considered moving with two different directions. The first one is in the x-direction (case I), while the second case is in the z-direction (case II). Also, the case of the fixed top wall was studied just for comparison. The solid volume fractions have been varied as 0 ≤ φ ≤ 0.1%, while the Richardson number is varied in the range of 0.01 ≤Ri ≤ 10. It was found that the maximum average Nusselt number corresponds to the case when the top wall moving in the negative x-direction. Also, the results indicated that the average Nusselt number increases with the increase in the Richardson number and the solid volume fraction.

MHD mixed convection of nanofluid in a cubic cavity with a conductive partition for various nanoparticle shapes

2019 ◽  
Vol 29 (10) ◽  
pp. 3584-3610 ◽  
Author(s):  
Fatih Selimefendigil ◽  
Hakan F. Öztop ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Nanoparticle Volume Fraction ◽  
Content Type ◽  
Particle Shapes

Purpose This paper aims to numerically examine the mixed convection of SiO2-water nanofluid flow in a three-dimensional (3D) cubic cavity with a conductive partition considering various shapes of the particles (spherical, cylindrical, blade, brick). The purpose is to analyze the effects of various pertinent parameters such as Richardson number (between 0.1 and 10), Hartmann number (between 0 and 10), solid nanoparticle volume fraction (between 0 and 0.04), particle shape (spherical, cylindrical, blade, brick) and different heights and lengths of the conductive partition on the fluid flow and heat transfer characteristics. Design/methodology/approach The numerical simulation was performed by using Galerkin-weighted residual finite element method for various values of Richardson number, Hartmann number, solid nanoparticle volume fraction, particle shape (spherical, cylindrical, blade, brick) and different heights and lengths of the conductive partition. Two models for the average Nusselt number were proposed for nanofluids with spherical and cylindrical particle by using multi-layer feed-forward neural networks. Findings It was observed that the average Nusselt number reduces for higher values of Richardson number and Hartmann number, while enhances for higher values of nanoparticle volume fraction. Among various types of particle shapes, blade ones perform the worst and cylindrical ones perform the best in terms of heat transfer enhancement, but this is not significant which is less than 3 per cent. The average Nusselt number deteriorates by about 6.53per cent for nanofluid at the highest volume fraction of spherical particle shapes, but it is 11.75per cent for the base fluid when Hartmann number is increased from 0 to 10. Conductive partition geometrical parameters (length and height) do not contribute to much to heat transfer process for the 3D cavity, except for the case when height of the partition reaches 0.8 times the height of the cubic cavity, the average Nusselt number value reduces by about 25per cent both for base fluid and for nanofluid when compared to case with cavity height which is 0.2 times the height of the cubic cavity. Originality/value Based on the literature survey, a 3D configuration for MHD mixed convection of nanofluid flow in a cavity with a conductive partition considering the effects of various particle shapes has never been studied in the literature. This study is a first attempt to use a conductive partition with nanofluid of various particle shapes to affect the fluid flow and heat transfer characteristics in a 3D cubic cavity under the influence of magnetic field. Partial or all findings of this study could be used for the design and optimization of realistic 3D thermal configurations that are encountered in practice and some of the applications were already mentioned above. In this study, thermal performance of the system was obtained in terms of average heat transfer coefficient along the hot surface, and it is modeled with multi-layer feed-forward neural networks.

scholarly journals Study of convection heat transfer enhancement inside lid driven cavity utilizing fins and nanofluid

2017 ◽  
Vol 21 (6 Part A) ◽  
pp. 2431-2442
Author(s):  
Arash Lavasani ◽  
Mousa Farhadi ◽  
Darzi Rabienataj
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Richardson Number ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Thermal Conductivity Ratio ◽  
Convection Flow ◽  
Driven Cavity ◽  
Ratio Change ◽  
Hot Surface

In the present study, the effect of suspension of nanoparticle on mixed convection flow is investigated numerically in lid driven cavity with fins on its hot surface. Study is carried out for Richardson numbers ranging from 0.1 to 10, fin(s) height ratio change from 0.05 to 0.15 and volume fraction of nanoparticles from 0 to 0.03, respectively. The thermal conductivity ratio (kfin/kf) is equal to 330 and Grashof number is assumed to be constant (104) so that the Richardson numbers changes with Reynolds number. Results show that the heat transfer enhances by using nanofluid for all studied Richardson numbers. Adding fins on hot wall has different effects on heat transfer depend to Richardson number and height of fins. Use of low height fin in flow with high Richardson number enhances the heat transfer rate while by increasing the height of fin the heat transfer reduces even lower than it for pure fluid. The overall enhancement in Nusselt number by adding 3% nanoparticles and 3 fins is 54% at Ri=10. They cause reduction of Nusselt Number by 25% at Ri=0.1. Higher fins decrease the heat transfer due to blocking fluid at corners of fins.

scholarly journals Effects of a Rotating Cone on the Mixed Convection in a Double Lid-Driven 3D Porous Trapezoidal Nanofluid Filled Cavity under the Impact of Magnetic Field

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 449 ◽  
Author(s):  
Ali J. Chamkha ◽  
Fatih Selimefendigil ◽  
Hakan F. Oztop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Mixed Convection ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Rotational Velocity ◽  
Rotating Cone ◽  
The Impact

Effects of a rotating cone in 3D mixed convection of CNT-water nanofluid in a double lid-driven porous trapezoidal cavity is numerically studied considering magnetic field effects. The numerical simulations are performed by using the finite element method. Impacts of Richardson number (between 0.05 and 50), angular rotational velocity of the cone (between −300 and 300), Hartmann number (between 0 and 50), Darcy number (between 10 − 4 and 5 × 10 − 2 ), aspect ratio of the cone (between 0.25 and 2.5), horizontal location of the cone (between 0.35 H and 0.65 H) and solid particle volume fraction (between 0 and 0.004) on the convective heat transfer performance was studied. It was observed that the average Nusselt number rises with higher Richardson numbers for stationary cone while the effect is reverse for when the cone is rotating in clockwise direction at the highest supped. Higher discrepancies between the average Nusselt number is obtained for 2D cylinder and 3D cylinder configuration which is 28.5% at the highest rotational speed. Even though there are very slight variations between the average Nu values for 3D cylinder and 3D cone case, there are significant variations in the local variation of the average Nusselt number. Higher enhancements in the average Nusselt number are achieved with CNT particles even though the magnetic field reduced the convection and the value is 84.3% at the highest strength of magnetic field. Increasing the permeability resulted in higher local and average heat transfer rates for the 3D porous cavity. In this study, the aspect ratio of the cone was found to be an excellent tool for heat transfer enhancement while 95% enhancements in the average Nusselt number were obtained. The horizontal location of the cone was found to have slight effects on the Nusselt number variations.

Sign in / Sign up

Export Citation Format

Share Document