Heat transfer characteristics of Al2O3/water nanofluid in laminar flow conditions with circular ring insert

Abstract Different types of vortices, such as horseshoe vortex, passage vortex, corner vortex, cause high heat transfer distributions and complex heat transfer characteristics at the endwall of turbine blades. In addition, the endwall heat transfer is also affected when the main flow is highly turbulent and wakes are generated by the trailing edge of the vane. Detailed heat transfer measurements are necessary to protect the blades under harsh and complex flow conditions. Therefore, this study investigated the heat transfer characteristics on the blade endwall under flow conditions that simulate high turbulence intensity of the main flow and the generation of wakes by the trailing edge of the vane. The endwall heat transfer was measured using the naphthalene sublimation method. A turbulence generating grid was installed in a linear cascade to simulate the main flow with high turbulence intensity and a wake generator with a rod bundle was used to simulate the wakes generated by the trailing edge of the vane. In the case of high turbulence intensity without wakes, the main flow with high turbulence intensity (Turbulence intensity, T.I = 7.5%) had little impact on the effect of the horseshoe vortex and passage vortex on the heat transfer characteristics. However, increasing turbulence caused the endwall heat transfer to decrease near the pressure side of the blade and increase near the suction side of the blade. On the other hand, the wakes resulted in heat transfer characteristics similar to high turbulence intensity, but decreased heat transfer by horseshoe vortex and passage vortex. The endwall heat transfer distributions were similar regardless of the turbulence intensity (T.I = 1.2%, 7.5%) in the cases with wakes (Rod passing Strouhal number, S = 0.3). This means that the flow condition of S = 0.3 has a more significant influence on the endwall heat transfer than that of T.I = 7.5%.

Download Full-text

Optimization of Mixed Hydrophilic and Hydrophobic Surfaces Under Laminar Flow Conditions

ASME 2020 Heat Transfer Summer Conference ◽

10.1115/ht2020-8953 ◽

2020 ◽

Author(s):

Brian Frymyer ◽

Alparslan Oztekin

Keyword(s):

Heat Transfer ◽

Laminar Flow ◽

Thermal Resistance ◽

Energy Barrier ◽

High Energy ◽

Film Condensation ◽

Dropwise Condensation ◽

Flow Conditions ◽

Mass Collection ◽

Laminar Flow Conditions

Abstract When condensation first forms on a surface, it starts as tiny droplets. As the surface continues to collect condensation, the droplets grow together and form a film. The film increases the thermal resistance of the system. It is possible to remove the fluid from the condensing surface before it develops into a film. Dropwise condensation has the capability of providing up to an order of magnitude higher heat transfer than film condensation. A hydrophobic surface is capable of sustaining dropwise condensation but creates a high energy barrier that restricts nucleation. A hydrophilic surface has a low energy barrier for nucleation but retains the water quickly transitioning to film condensation. A hydrophilic and hydrophobic patterned surface creates a surface with a low nucleation energy barrier and is capable of sustaining dropwise condensation. Surface patterns are evaluated under laminar flow conditions to maximize mass collection. The surfaces are evaluated using a thermal model, which includes an equivalent thermal resistance for diffusion. Laminar flow rates are evaluated using Reynolds numbers from 1,218 to 4 × 105. Hydrophilic nodules sizes are evaluated from 0.1 mm to 3.7 mm. Under natural convection flow, mass collection can be increased by 20% with respect to film heat transfer.

Download Full-text