A Computer Simulation Model for Selecting Advertising Schedules

At the 1988 Calgary Winter Olympics, six triple somersaults with three twists or four twists were filmed using two cameras. Angles describing body configuration and orientation were determined and were used as input into a computer simulation model of aerial movement. It was found that the twist angle of each simulation deviated from the corresponding angle obtained from film by less than 0.08 revolutions during the first somersault of each movement. Contributions to the tilt angle after one somersault were determined using simulations based on modifications of the film data. It was found that of the six competitors, two initiated the twist during the takeoff phase, two initiated the twist during the aerial phase, and two used a combination of both methods.

Download Full-text

DESIGN AND DEVELOPMENT OF AN EFFICIENT COMPUTER SIMULATION MODEL FOR RESPONSE ANALYSIS OF A MOORED SEMI-SUBMERSIBLE

The International Journal of Maritime Engineering ◽

10.5750/ijme.v161ia1.1078 ◽

2021 ◽

Vol 161 (A1) ◽

Author(s):

V Domala ◽

R Sharma

Keyword(s):

Computer Simulation ◽

Simulation Model ◽

Degrees Of Freedom ◽

Experimental Results ◽

Response Analysis ◽

Computer Simulation Model ◽

Governing Equations ◽

Design And Development ◽

Mooring Lines ◽

Steel Wires

This paper presents the design and development of an efficient modular ‘Computer Simulation Model (CSM)’ for response analysis of a moored semi-submersible. The computer simulation model is designed in two split models (i.e. computational and experimental models) and each of these models consists of various modules. The modules are developed from basic governing equations related to motion and modules are integrated and we aim for a seamless integration. The moored semi-submersible is represented mathematically as six degrees of freedom dynamic system and the coupling effects between the structure and mooring lines are considered. The basic geometric configuration of semi- submersible is modelled and analyzed for stability computations in MS-Excel*TM and then the basic governing equations related to motion are modelled mathematically in a module and solved numerically with Ansys-AQWA**TM. The computational model is validated and verified with some available experimental results. The CSM is utilized to study the surge and sway responses with respect to the horizontal range of mooring lines and our results show good validation with the existing experimental results. Our presented results show that the fibre wires have minimum steady state response in surge and sway degrees of freedom as compared with the steel wires. However, they have large drift as compared with steel wires. Finally, we show that the computer simulation model can help in detailed analysis of responses and results can be utilized for design and development of new age semi-submersibles for optimum performances for a given set of parameters.

Download Full-text