scholarly journals Hydrodynamic and Mathematical Simulations of Flow Field and Temperature Profile in an Asymmetrical T-type Single-strand Continuous Casting Tundish

2008 ◽  
Vol 48 (12) ◽  
pp. 1712-1721 ◽  
Author(s):  
Song-xia Liu ◽  
Xue-min Yang ◽  
Lin Du ◽  
Liang Li ◽  
Cheng-zhi Liu
Keyword(s):  
Flow Field ◽  
Continuous Casting ◽  
Temperature Profile ◽  
Single Strand ◽  
Mathematical Simulations ◽  
Continuous Casting Tundish

scholarly journals Multiphase Flow Behavior in a Single-Strand Continuous Casting Tundish during Ladle Change

2020 ◽  
Vol 60 (3) ◽  
pp. 499-508 ◽  
Author(s):  
Haitao Ling ◽  
Rui Xu ◽  
Haijun Wang ◽  
Lizhong Chang ◽  
Shengtao Qiu
Keyword(s):  
Continuous Casting ◽  
Multiphase Flow ◽  
Flow Behavior ◽  
Single Strand ◽  
Continuous Casting Tundish

Numerical Calculation of Fluid Flow in a Continuous Casting Tundish

2013 ◽  
Vol 774-776 ◽  
pp. 316-320
Author(s):  
Yang Li ◽  
Yan Jin ◽  
Hui Yu ◽  
Kang Yang ◽  
Fan Ai ◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Fluid Flow ◽  
Numerical Calculation ◽  
Flow Field ◽  
Continuous Casting ◽  
Molten Steel ◽  
Liquid Steel ◽  
Retaining Wall ◽  
Continuous Casting Tundish ◽  
Wall Flow

Placement in the middle retaining wall package, aimed at controlling the flow of liquid steel forms, so that movement of a reasonable level remained stable, while reducing interference from turbulence and dead zones, molten steel in order to extend the average stay of removal in favor of inclusion to improve the cleanliness of molten steel. Keywords:Tundish; Retaining Wall; Flow field; Mathematical Modeling; Inclusion;Optimization setting

Optimizing of Flow Control Devices in a Single Strand Continuous Casting Tundish

2011 ◽  
Vol 284-286 ◽  
pp. 1209-1215 ◽  
Author(s):  
Lei Lei Zhang ◽  
Deng Fu Chen ◽  
Qiang Liu ◽  
Min Zhang ◽  
Xin Xie ◽  
...  
Keyword(s):  
Flow Field ◽  
Continuous Casting ◽  
Flow Control ◽  
Control Device ◽  
Flow Control Devices ◽  
Flow Control Device ◽  
Continuous Casting Tundish ◽  
Control Devices ◽  
Water Simulation ◽  
Orthogonal Optimization

Flow control devices (weir and dam) in a continuous casting tundish are very important to the flow field, which influences the temperature uniform and the inclusion floating. In this work, the weir and dam were firstly optimized through numerical simulation and water simulation synthetically by orthogonal optimization tests. And the optimal parameters showed that the distance from upper weir to inlet was 1000 mm, the distance of upper weir to tundish bottom was 150 mm, the distance from upper weir to dam was 600 mm, and the height of the dam was 320 mm. Then the effect of different arrangement holes on the dam was discussed through RTD curve and velocity field under the optimum flow control device. And it revealed that the hole influenced the flow pattern in that area obviously, a dam with two holes could get a better flow field.

scholarly journals Influence of M-EMS on Fluid Flow and Initial Solidification in Slab Continuous Casting

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3681
Author(s):  
Guoliang Liu ◽  
Haibiao Lu ◽  
Bin Li ◽  
Chenxi Ji ◽  
Jiangshan Zhang ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Flow Field ◽  
Continuous Casting ◽  
Casting Speed ◽  
Liquid Pool ◽  
Industrial Test ◽  
Magnetic Flux Density ◽  
Continuous Casting Mold ◽  
Slab Continuous Casting ◽  
Initial Solidification

A mathematical model coupled with electromagnetic field has been developed to simulate the transient turbulence flow and initial solidification in a slab continuous casting mold under different electromagnetic stirring (EMS) currents and casting speeds. Through comparing the magnetic flux density, flow field with measured results, the reliability of the mathematical model is proved. The uniform index of solidified shell thickness has been introduced to judge the uniformity of the solidified shell. The results show that a horizonal recirculation flow has been generated when EMS is applied, and either accelerated or decelerated regions of flow field are formed in the liquid pool. Large EMS current and low casting speed may cause the plug flow near the mold narrow face and a suitable EMS current can benefit to the uniform growth of solidified shell. Meanwhile, an industrial test exhibits that EMS can weaken the level fluctuation and number density of inclusion. Overall, a rational EMS current range is gained, when the casting speed is 1.2 m/min, the rational EMS current is 500–600 A.

Flow Visualization by Means of Contactless Inductive Flow Tomography in the Presence of a Magnetic Brake

2015 ◽  
Vol 15 (1) ◽  
pp. 41-48 ◽  
Author(s):  
Matthias Ratajczak ◽  
Thomas Wondrak ◽  
Klaus Timmel ◽  
Frank Stefani ◽  
Sven Eckert
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Magnetic Fields ◽  
Flow Field ◽  
Continuous Casting ◽  
Flow Structure ◽  
Cross Section ◽  
Two Dimensional ◽  
Slab Casting ◽  
Two Dimensional Flow

AbstractIn continuous casting DC magnetic fields perpendicular to the wide faces of the mold are used to control the flow in the mold. Especially in this case, even a rough knowledge of the flow structure in the mold would be highly desirable. The contactless inductive flow tomography (CIFT) allows to reconstruct the dominating two-dimensional flow structure in a slab casting mold by applying one external magnetic field and by measuring the flow-induced magnetic fields outside the mold. For a physical model of a mold with a cross section of 140 mm×35 mm we present preliminary measurements of the flow field in the mold in the presence of a magnetic brake. In addition, we show first reconstructions of the flow field in a mold with the cross section of 400 mm×100 mm demonstrating the upward scalability of CIFT.

Effects of U-Shape Inner Cooler on Flow and Solidification of Molten Steel in Slab Continuous Casting Mold

2011 ◽  
Vol 291-294 ◽  
pp. 423-427
Author(s):  
Yan Juan Jin ◽  
Xiao Chao Cui ◽  
Zhu Zhang
Keyword(s):  
Fluid Dynamics ◽  
Temperature Field ◽  
Flow Field ◽  
Continuous Casting ◽  
Molten Steel ◽  
Continuous Casting Mold ◽  
Slab Continuous Casting ◽  
Cooling Technology ◽  
Steel Flow

An inner-outer coupled cooling technology of molten steel for 1240×200mm slab continuous casting, that is to set an inner cooler—U shape pipes in the mold, is put forward in order to enhance the efficiency of transmitting heat and improve inner structure of billet. The flow status and solidification status of molten steel under coupling flow field and temperature field in inner-outer coupled cooling mold are simulated by using fluid dynamics software, and compare with those in traditional mold. It is found that setting inner cooler in the mold can make molten steel flow status even, which is favorable to floating up of the inclusion, quickening the solidification of steel liquid and improving the quality of billet.

Sign in / Sign up

Export Citation Format

Share Document