scholarly journals Effects of Metal Droplets on Electromagnetic Field, Fluid Flow and Temperature Field in Electroslag Remelting Process

2017 ◽  
Vol 57 (7) ◽  
pp. 1205-1212 ◽  
Author(s):  
Jia Yu ◽  
Zhouhua Jiang ◽  
Fubin Liu ◽  
Kui Chen ◽  
Huabing Li ◽  
...  
2007 ◽  
Vol 546-549 ◽  
pp. 707-712
Author(s):  
Hai Tao Zhang ◽  
Hiromi Nagaum ◽  
Yu Bo Zuo ◽  
Jian Zhong Cui

Low frequency electromagnetic casting is a new developed technology that appears in the recent years. In this paper, a comprehensive mathematical model has been developed to describe the interaction of the multiple physics fields during LFEC (low frequency electromagnetic casting) process. The model is based on a combination of the commercial finite element package ANSYS and the commercial finite volume package FLUENT, with the former for calculation of the electromagnetic field and the latter for calculation of the magnetic driven fluid flow, heat transfer and solidification. Moreover, the model has been verified against the temperature measurements obtained from one 7XXX aluminum alloy billet of 200mm in diameter, during the LFEC casting processes, respectively. There was a good agreement between the calculated results and the measured results. Further, the effects of electromagnetic frequency on fluid flow, temperature field and solidification during LFEC process have investigated numerically by using the mathematic model. The choosing criterion of the electromagnetic frequency during LFEC process has been used in order to obtain the best structure of the billets by analyzing the effects of fluid flow and temperature field on the solidification process in the presence of electromagnetic field.


2016 ◽  
Vol 10 (1) ◽  
pp. 205-219
Author(s):  
Qiu Hongbo ◽  
Dong Yu ◽  
Yang Cunxiang

Power rectifiers are very necessary in the wind power generation systems since they are the necessary channels that link the generator and power gird together. However, they have some effects on the permanent magnet wind generator due to their work on fast on-off transitions. Taking an 8kW 2000r/min wind-driven permanent magnet generator as an example, the system model and external circuit were established. Firstly, based on the field-circuit coupling calculation method, the voltage and current harmonics have been studied respectively when the generator was connected to rectifier loads and pure resistance loads, so did the total harmonic distortion. The mechanism of harmonic impacted by rectifiers was revealed. Secondly, combined the harmonic electromagnetic field theory, the stator core loss, armature winding copper loss and rotor eddy loss were analyzed when the generator connected different loads. Furthermore, according to the definition of nonlinear circuits PF, the numerical analysis method was adopted to calculate the power factor when the generator connected two loads respectively. The change mechanism of PF impacted by rectifiers has been revealed. In addition, the temperature field model has been established and the generator temperature was also analyzed. The temperature distributions were obtained when the wind generator was connected to different loads. Then, the relationship between losses and temperature was combined, the change rules of permanent magnet temperature by the eddy current loss were studied under different load. At last, it can prove that the rectifiers have influences on both electromagnetic field and temperature field through comparing the simulation results with experimental test data.


2017 ◽  
Vol 12 (1) ◽  
pp. 91-96
Author(s):  
Vladimir Popov ◽  
Vladimir Shchukin

Process of modifying of the surface layer of metals under influence of high-frequency electromagnetic field was considered using numerical simulation. The temperature field and the size of modified region were determined at various modes of processing.


Applied laser ◽  
2014 ◽  
Vol 34 (5) ◽  
pp. 389-394
Author(s):  
王维 Wang Wei ◽  
刘奇 Liu Qi ◽  
杨光 Yang Guang ◽  
钦兰云 Qin Lanyun ◽  
薛雄 Xue Xiong

Sign in / Sign up

Export Citation Format

Share Document