scholarly journals Effect of Orientation and Temperature on the Plastic Flow Properties of Iron Single Crystals under Simple Shear

Author(s):  
Akinori MATSUDA
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhenghao Chen ◽  
Bhaskar Paul ◽  
Sanjib Majumdar ◽  
Norihiko L. Okamoto ◽  
Kyosuke Kishida ◽  
...  

AbstractThe plastic deformation behavior of single crystals of two transition-metal diborides, ZrB2 and TiB2 with the AlB2 structure has been investigated at room temperature as a function of crystal orientation and specimen size by micropillar compression tests. Although plastic flow is not observed at all for their bulk single crystals at room temperature, plastic flow is successfully observed at room temperature by the operation of slip on {1$${\bar{1}}$$ 1 ¯ 00}<11$${\bar{2}}$$ 2 ¯ 3> in ZrB2 and by the operation of slip on {1$${\bar{1}}$$ 1 ¯ 00}<0001> and {1$${\bar{1}}$$ 1 ¯ 00}<11$${\bar{2}}$$ 2 ¯ 0> in TiB2. Critical resolve shear stress values at room temperature are very high, exceeding 1 GPa for all observed slip systems; 3.01 GPa for {1$${\bar{1}}$$ 1 ¯ 00}<11$${\bar{2}}$$ 2 ¯ 3> slip in ZrB2 and 1.72 GPa and 5.17 GPa, respectively for {1$${\bar{1}}$$ 1 ¯ 00}<0001> and {1$${\bar{1}}$$ 1 ¯ 00}<11$${\bar{2}}$$ 2 ¯ 0> slip in TiB2. The identified operative slip systems and their CRSS values are discussed in comparison with those identified in the corresponding bulk single crystals at high temperatures and those inferred from micro-hardness anisotropy in the early studies.


Author(s):  
S Bair

A thorough characterization of all viscous flow properties relevant to steady simple shear was carried out for five liquid lubricants of current interest to tribology. Shear stresses were generated to values significant to concentrated contact lubrication. Two types of non-Newtonian response were observed: shear-thinning as a power-law fluid and near rate-independence. Functions and parameters were obtained for the temperature and pressure dependence of the viscosity and of the time constant for the Carreau-Yasuda equation. Results are consistent with free volume and kinetic theory, but directly contradict many assumptions currently utilized for numerical simulation and for extracting rheological properties from contact measurements.


2008 ◽  
Vol 56 (14) ◽  
pp. 3338-3343 ◽  
Author(s):  
Ju-Young Kim ◽  
Seung-Kyun Kang ◽  
Julia R. Greer ◽  
Dongil Kwon

1961 ◽  
Vol 83 (4) ◽  
pp. 499-508 ◽  
Author(s):  
R. L. Mehan

The yielding and fracture characteristics of Zircaloy-2 as a function of stress state were investigated at room temperature through the medium of thin-walled cylindrical specimens under internal pressure and axial tension. Stress states from uniaxial longitudinal tension to uniaxial tangential tension were examined. Two tests at elevated temperature were performed at a single stress ratio. It was found that the fracture ductility lessened with increasing biaxiality. A minimum in ductility was found at balanced biaxial tension where the fracture ductility, as expressed by the effective strain, was 29 per cent. The yielding and plastic flow properties were found to be highly anisotropic. Two methods were used to express the plastic flow data: a graphical approach and a theoretical analysis based on a theory proposed by R. Hill, either one of which is suitable to express the flow properties of Zircaloy-2 under various states of combined stress.


Sign in / Sign up

Export Citation Format

Share Document