The Use of Inclined Tuyer and Its Effect on the Compatibility of Downdraft Gasifier Fed by Rice Husk and Wood Sawdust

Author(s):  
A.A.P. Susastriawan ◽  
Harwin Saptoadi ◽  
Purnomo
2021 ◽  
Vol 13 (4) ◽  
pp. 2027
Author(s):  
Md. Emdadul Hoque ◽  
Fazlur Rashid ◽  
Muhammad Aziz

Synthetic gas generated from the gasification of biomass feedstocks is one of the clean and sustainable energy sources. In this work, a fixed-bed downdraft gasifier was used to perform the gasification on a lab-scale of rice husk, sawdust, and coconut shell. The aim of this work is to find and compare the synthetic gas generation characteristics and prospects of sawdust and coconut shell with rice husk. A temperature range of 650–900 °C was used to conduct gasification of these three biomass feedstocks. The feed rate of rice husk, sawdust, and coconut shell was 3–5 kg/h, while the airflow rate was 2–3 m3/h. Experimental results show that the highest generated quantity of methane (vol.%) in synthetic gas was achieved by using coconut shell than sawdust and rice husk. It also shows that hydrogen production was higher in the gasification of coconut shell than sawdust and rice husk. In addition, emission generations in coconut shell gasification are lower than rice husk although emissions of rice husk gasification are even lower than fossil fuel. Rice husk, sawdust, and coconut shell are cost-effective biomass sources in Bangladesh. Therefore, the outcomes of this paper can be used to provide clean and economic energy sources for the near future.


2017 ◽  
Author(s):  
Adi Surjosatyo ◽  
Imaduddin Haq ◽  
Hafif Dafiqurrohman ◽  
Felly Rihlat Gibran

2020 ◽  
Vol 8 ◽  
pp. e00414
Author(s):  
Isaac Osei ◽  
Francis Kemausuor ◽  
Michael Kweku Commeh ◽  
Joseph Oppong Akowuah ◽  
Lovans Owusu-Takyi
Keyword(s):  

2019 ◽  
Vol 239 ◽  
pp. 316-323 ◽  
Author(s):  
Teng Wang ◽  
Yongjie Xue ◽  
Rong Hao ◽  
Haobo Hou ◽  
Jingxin Liu ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
pp. 483-501
Author(s):  
Luis Miguel Llamos Tulumba ◽  
◽  
Raúl Yamil Hidalgo Sandoval ◽  
Hugo Diaz Avalos ◽  
Hugo Guillermo Diaz Panduro

The purpose of this research was to demonstrate that the use of residual oil as a heat transport fluid and the use of rice husk as a thermal insulator is an efficient alternative for the greater use of solar energy. For this, a prototype of a solar dryer was designed and built consisting of a flat solar thermal concentrator and a parabolic cylindrical thermal concentrator (CCP), this was validated by drying Guazuma crinita, Mart. (White ball) and monitored by a contact hygrometer. Five tests were carried out, the first test was considered as a control, in which heat transport fluid and thermal insulators were not used, and in the following four tests two types of heat transport fluids were combined (residual motor oil and brine) and two types of thermal insulators (wood sawdust and rice husk), obtaining as a result that the most efficient test was number three, consisting of residual motor oil as heat transport fluid and rice husk as thermal insulator. With the most efficient test, the prototype was validated by drying low-density wood, reducing the humidity of the wood from 45.8% to 12.3% in ten sunny days.


Author(s):  
Nguyen Van Lanh ◽  
Nguyen Huy Bich ◽  
Bui Ngoc Hung ◽  
Nguyen Nam Quyen
Keyword(s):  

2019 ◽  
Vol 3 (4) ◽  
pp. 14-19
Author(s):  

Rice husk gasification developed as process that converts organic rice husk into a producer gas. The achievement is to reduce dependency on fossil fuel, reduce pollution and move into green technology. Downdraft gasifier is a reactor that can produce lower tar concentration in the producer gas. There are important objectives had been investigated which are to modify on laboratory scaled downdraft gasifier from the previous project, where suitable with the rice husk gasification system, to measure the exit temperatures in gasifier which it determine tar quantity at the output, to measure the amount of moisture removed from the rice husk where it determine the quantity of moisture in rice husk and, to measure the complete burning of rice husk in a gasifier by taking the time performing the experiments. All the objectives are to be obtaining the output which can be used as a biofuel sources. The method to achieve the objectives, firstly redesign performed using SolidWork software. Next, the temperature determined using thermocouple. Then, next objective which the rice husk drying analysis determined by drying rice husk and scale it with weighing scale. And lastly, burning was determined by using stopwatch and weighing scale with complete fabricated gasifier. The results shows the fabrication of the modification, average exits temperature of producer gas which around 203.93°C, different moisture weight of rice husk which around 10grams and, average time of completes burning of gasifier is 61 minutes and ability to capture producer gas’s flammability. This work concluded by achieves the objectives based on the results and may increase in understanding of the works related.


Sign in / Sign up

Export Citation Format

Share Document