scholarly journals Analysis of Structure and Abrasion Resistance of the Metal Composite Based on an Intermetallic FeAl Phase with VC and TiC Precipitates

2013 ◽  
Vol 13 (3) ◽  
pp. 51-54
Author(s):  
D. Kopyciński ◽  
E. Guzik ◽  
R. Gilewski ◽  
A. Szczęsny ◽  
J. Dorula
Keyword(s):  
Cast Iron ◽  
High Temperatures ◽  
Low Cost ◽  
Intermetallic Phase ◽  
Crystallographic Structure ◽  
Metal Composite ◽  
Feal Phase ◽  
Resistance To Oxidation ◽  
Long Range Ordering

Abstract Metal alloys with matrix based on an Fe-Al system are generally considered materials for high-temperature applications. Their main advantages are compact crystallographic structure, long-range ordering and structural stability at high temperatures. These materials are based on an intermetallic phase of FeAl or Fe3Al, which is stable in the range from room temperature up to the melting point of 1240°C. Their application at high temperatures is also beneficial because of the low cost of production, very good resistance to oxidation and corrosion, and high mechanical strength. The casting alloy the structure of which includes the FeAl phase is, among others, highaluminium cast iron. This study has been devoted to the determination of the effect of vanadium and titanium on the transformation of the high-aluminium cast iron structure into an in-situ FeAl-VC composite.

scholarly journals Influence of Cumulative Plastic Deformation on Microstructure of the Fe-Al Intermetallic Phase Base Alloy

2014 ◽  
Vol 59 (3) ◽  
pp. 987-991 ◽  
Author(s):  
I. Bednarczyk ◽  
D. Kuc ◽  
G. Niewielski
Keyword(s):  
Plastic Deformation ◽  
Base Alloy ◽  
Low Cost ◽  
Intermetallic Phase ◽  
Construction Materials ◽  
Industrial Applications ◽  
Al Alloy ◽  
Deformation Method ◽  
Deformation Parameters ◽  
Feal Phase

Abstract This article is part of the research on the microstructural phenomena that take place during hot deformation of intermetallic phase-based alloy. The research aims at design an effective thermo - mechanical processing technology for the investigated intermetallic alloy. The iron aluminides FeAl have been among the most widely studied intermetallics because their low cost, low density, good wear resistance, easy of fabrication and resistance to oxidation and corrosion. There advantages create wide prospects for their industrial applications for components of machines working at a high temperature and in corrosive environment. The problem restricting their application is their low plasticity and their brittle cracking susceptibility, hampers their development as construction materials. Consequently, the research of intermetallic-phase-based alloys focuses on improvement their plasticity by hot working proceses. The study addresses the influence of deformation parameters on the structure of an Fe-38% at. Al alloy with Zr, B Mo and C microadditions, using multi – axis deformation simulator. The influence of deformation parameters on microstructure and substructure was determined. It was revealed that application of cumulative plastic deformation method causes intensive reduction of grain size in FeAl phase base alloy.

DETERMINATION OF MATERIAL CATALYCITY AT HIGH TEMPERATURES IN THE VAT-104 HYPERSONIC WIND TUNNEL

2014 ◽  
Vol 45 (1) ◽  
pp. 3-20 ◽  
Author(s):  
Ivan Vladimirovich Egorov ◽  
Boris Evgen'evich Zhestkov ◽  
Vladimir Viktorovich Shvedchenko
Keyword(s):  
Wind Tunnel ◽  
High Temperatures ◽  
Hypersonic Wind Tunnel

Automation of selected brazes' dynamic properties in high-temperatures' measurement process

2013 ◽  
Vol 18 (2-3) ◽  
pp. 33-41
Author(s):  
Dominik Sankowski ◽  
Marcin Bakala ◽  
Rafał Wojciechowski
Keyword(s):  
Surface Tension ◽  
High Temperatures ◽  
Dynamic Properties ◽  
Automatic Measurement ◽  
Measurement Methodology ◽  
Joining Process ◽  
Wetting Force ◽  
Research Grant

Abstract The good quality of several manufactured components frequently depends on solidliquid interactions existing during processing. Nowadays, the research in material engineering focuses also on modern, automatic measurement methods of joining process properties, i.a. wetting force and surface tension, which allows for quantitative determination of above mentioned parameters. In the paper, the brazes’ dynamic properties in high-temperatures’ measurement methodology and the stand for automatic determination of braze’s properties, constructed and implmented within the research grant nr KBN N N519 441 839 - An integrated platform for automatic measurement of wettability and surface tension of solders at high temperatures, are widely described

Microextraction and Chromatographic Analysis of Budesonide Epimers in Exhaled Breath Condensate

2020 ◽  
Vol 16 (8) ◽  
pp. 1032-1040
Author(s):  
Laleh Samini ◽  
Maryam Khoubnasabjafari ◽  
Mohamad M. Alimorad ◽  
Vahid Jouyban-Gharamaleki ◽  
Hak-Kim Chan ◽  
...  
Keyword(s):  
Biological Fluids ◽  
Exhaled Breath Condensate ◽  
Low Cost ◽  
Exhaled Breath ◽  
Chromatography Method ◽  
Extraction Solvent ◽  
Drug Concentrations ◽  
Dispersive Liquid Liquid Microextraction ◽  
Breath Condensate

Background: Analysis of drug concentrations in biological fluids is required in clinical sciences for various purposes. Among other biological samples, exhaled breath condensate (EBC) is a potential sample for follow up of drug concentrations. Methods: A dispersive liquid-liquid microextraction (DLLME) procedure followed by a validated liquid chromatography method was employed for the determination of budesonide (BDS) in EBC samples collected using a homemade setup. EBC is a non-invasive biological sample with possible applications for monitoring drug concentrations. The proposed analytical method is validated according to the FDA guidelines using EBC-spiked samples. Its applicability is tested on EBC samples collected from healthy volunteers receiving a single puff of BDS. Results: The best DLLME conditions involved the use of methanol (1 mL) as a disperser solvent, chloroform (200 μL) as an extraction solvent, and centrifugation rate of 3500 rpm for 5 minutes. The method was validated over a concentration range of 21-210 μg·L-1 in EBC. Inter- and intra-day precisions were less than 10% where the acceptable levels are less than 20%. The validated method was successfully applied for the determination of BDS in EBC samples. Conclusion: The findings of this study indicate that the developed method can be used for the extraction and quantification of BDS in EBC samples using a low cost method.

Development and Validation of an Eco-Friendly and Low-Cost Method for the Quantification of Cefepime Hydrochloride in Powder for Injectable Solution Using Infrared (IR) Spectroscopy

2020 ◽  
Vol 16 (4) ◽  
pp. 456-464
Author(s):  
Danilo F. Rodrigues ◽  
Hérida R.N. Salgado
Keyword(s):  
Ir Spectroscopy ◽  
Low Cost ◽  
Pharmaceutical Preparations ◽  
Potassium Bromide ◽  
Pharmaceutical Products ◽  
Injectable Formulation ◽  
Ich Guidelines ◽  
Lactam Ring ◽  
Development And Validation

Background: A simple, eco-friendly and low-cost Infrared (IR) method was developed and validated for the analysis of Cefepime Hydrochloride (CEF) in injectable formulation. Different from some other methods, which employ organic solvents in the analyses, this technique does not use these types of solvents, removing large impacts on the environment and risks to operators. Objective: This study aimed at developing and validating a green analytical method using IR spectroscopy for the determination of CEF in pharmaceutical preparations. Methods: The method was validated according to ICH guidelines and the quantification of CEF was performed in the spectral region absorbed at 1815-1745 cm-1 (stretching of the carbonyl group of β- lactam ring). Results: The validated method showed to be linear (r = 0.9999) in the range of 0.2 to 0.6 mg/pellet of potassium bromide, as well as for the parameters of selectivity, precision, accuracy, robustness and Limits of Detection (LOD) and Quantification (LOQ), being able to quantify the CEF in pharmaceutical preparations. The CEF content obtained by the IR method was 103.86%. Conclusion: Thus, the method developed may be an alternative in the quality control of CEF sample in lyophilized powder for injectable solution, as it presented important characteristics in the determination of the pharmaceutical products, with low analysis time and a decrease in the generation of toxic wastes to the environment.

Sign in / Sign up

Export Citation Format

Share Document