scholarly journals Statistical process control and CAQ systems as a tools assuring quality in the automotive industry

2019 ◽  
Vol 2 (1) ◽  
pp. 336-344
Author(s):  
Łukasz Wiecha ◽  
Grzegorz Ćwikła
Keyword(s):  
Quality Management ◽  
Process Control ◽  
Statistical Process Control ◽  
Automotive Industry ◽  
Management System ◽  
Quality Management System ◽  
Statistical Process ◽  
Assurance System ◽  
A Company

Abstract The aim of the article is to present the case study of implementation of the example CAQ system, which allows to meet the requirements of IATF 16949:2016 and the VDA 6.1 standards in the field of statistical process control (SPC). The foundations of the CAQ systems concept and their specific requirements, especially for companies operating in the automotive industry, for which modern CAQ tools are necessary, in the described case based on the LEAN-QS program, are presented. The article presents the observations and results of the analysis of the operation of the quality assurance system in a company that is a supplier of car parts. One of the modules of the LEAN-QS program was implemented there, which makes it possible to meet the requirements of a certified quality management system. The effectiveness of the presented tool was demonstrated, allowing to meet industry requirements while minimizing resources necessary for supervision and proper implementation of the quality management system process, which in this case is the SPC.

scholarly journals ANALISIS KUALITAS PRODUK MENGGUNAKAN METODE STATISTIC PROCESS CONTROL (SPC) MINITAB DAN TIME-CHARTING DI PT. COCA-COLA BOTTLING INDONESIA UNIT LAMPUNG

2017 ◽  
Vol 1 (2) ◽  
Author(s):  
Joko Saryono ◽  
Keyword(s):  
Quality Control ◽  
Process Control ◽  
Statistical Process Control ◽  
Control Method ◽  
Production Data ◽  
Statistical Process ◽  
Research Results ◽  
Statistic Process Control ◽  
Gas Volume ◽  
A Company

Abstract PT. COCA-COLA BOTTLING INDONESIA is a company engaged in the field of Agro-industry is bottling soft drinks and not sparkling. The products produced are Coca-Cola, Sprite, Fanta, and Tea. To be able to compete with similar industries then the company implements quality control by Statistical Process Control method. In the development of this SPC many methods there are manual or who use the software. Currently PT. Coca-Cola Bottling Indonesia in quality control using Time Charting method, but since the transition from Minitab to Time Charting the tendency of the value of capability below standard, whereas production data is almost the same as using Minitab. The purpose of this research is to analyze the inequality of Statistical Process Control between Minitab 13 and Time Charting. Time Charting method is a new method that is given by the headquarters for the process of quality control can be fast and accurate. Quality control with the Statistical Process Control of Minitab and Time Charting methods after the results of the research results was found to be part of different LSL and USL charging, and Calculate Statistic Using different from Minitab method should still be 6 but in written procedure 3. For writing LSL And USL if the Time Charting is determined by the head office while Minitab analysts fill in based on experiments on the decrease of gas volume marketed in previous years. From the research results obtained Cpk data for Minitab method 13 is Sprite 390 ml 1.47, Sprite 1000 ml 1.90 and Sprite 1500 ml 1.38. The result of the research was using Minitab method and the Charting Time of Capacity that is above 1.33 average. The causes of the resulting inequality of both methods are the LSL, USL and Calculate Statistic Using values. The smaller the value of Calculate Statistic Using the higher Cpk produced. Keywords: Production, Statistical Process Control, Quality.

Case study: the use of statistical process control in fish product packaging

Food Control ◽  
1998 ◽  
Vol 9 (5) ◽  
pp. 289-297 ◽  
Author(s):  
Nigel P. Grigg ◽  
Jeannette Daly ◽  
Marjorie Stewart
Keyword(s):  
Process Control ◽  
Statistical Process Control ◽  
Statistical Process ◽  
Product Packaging ◽  
Fish Product

Statistical Methods in the Automotive Industry

2015 ◽  
Vol 791 ◽  
pp. 56-62
Author(s):  
Ewa Golińska ◽  
Marcin Zemczak
Keyword(s):  
Decision Making ◽  
Quality Management ◽  
Statistical Process Control ◽  
Statistical Methods ◽  
Automotive Industry ◽  
Manufacturing Processes ◽  
Key Factors ◽  
High Quality ◽  
Statistical Process ◽  
Decision Making Processes

Controlling of the manufacturing processes is one of the key factors that allow companies to produce goods of high quality. In the article one of methods of the quality management - statistical process control (SPC) has been discussed. On the example of the car headrests manufacturing enterprise benefits from applying this method have been presented. Authors pointed out that the use of statistical methods in decision-making processes must not be difficult and time-consuming, if is being supported by a computer with using inexpensive tools.

Quality management system and accreditation of measurements in a surface science laboratory: the case study of MiNALab

2014 ◽  
Vol 46 (10-11) ◽  
pp. 927-930 ◽  
Author(s):  
Erica Iacob ◽  
Lia Vanzetti ◽  
Salvatore Gennaro ◽  
Federico Pecoraro ◽  
Damiano Giubertoni ◽  
...  
Keyword(s):  
Quality Management ◽  
Surface Science ◽  
Management System ◽  
Quality Management System ◽  
Science Laboratory
Sign in / Sign up

Export Citation Format

Share Document