Thermal decomposition kinetics of strontium oxalate

2007 ◽  
Vol 61 (5) ◽  
Author(s):  
F. Al-Newaiser ◽  
S. Al-Thabaiti ◽  
A. Al-Youbi ◽  
A. Obaid ◽  
M. Gabal

AbstractThe thermal decomposition behavior in air of SrC2O4 · 1.25H2O was studied up to the formation of SrO using DTA-TG-DTG techniques. The decomposition proceeds through four well-defined steps. The first two steps are attributed to the dehydration of the salt, while the third and fourth ones are assigned to the decomposition of the anhydrous strontium oxalate into SrCO3 and the decomposition of SrCO3 to SrO, respectively. The exothermic DTA peak found at around 300°C is ascribed to the recrystallization of the anhydrous strontium oxalate. On the other hand, the endothermic DTA peak observed at 910°C can be attributed to the transition of orthorhombic-hexagonal phase of SrCO3. The kinetics of the thermal decomposition of anhydrous strontium oxalate and strontium carbonate, which are formed as stable intermediates, have been studied using non-isothermal TG technique. Analysis of kinetic data was carried out assuming various solid-state reaction models and applying three different computational methods. The data analysis according to the composite method showed that the anhydrous oxalate decomposition is best described by the two-dimensional diffusion-controlled mechanism (D2), while the decomposition of strontium carbonate is best fitted by means of the three-dimensional phase boundary-controlled mechanism (R3). The values of activation parameters obtained using different methods were compared and discussed.

2014 ◽  
Vol 46 (1) ◽  
pp. 37-53 ◽  
Author(s):  
M. Sumar-Ristovic ◽  
D.M. Minic ◽  
V. Blagojevic ◽  
K. Andjelkovic

Thermal decomposition of Co(II) complex with N-benzyloxycarbonylglycinato ligand, [Co(N-Boc-gly)2(H2O)4]?2H2O, in non-isothermal conditions occurs in three complex steps. In order to investigate detail kinetics of first two steps, dehydration and ligand degradation, DTG curves were deconvoluted using product of Gaussian and Lorentzian function. It was shown that process of complex dehydration consists of three, while process of ligand fragmentation consist of five elementary steps. For elementary steps the kinetic triplet (Ea, Z and f(?)) was determinated. Kinetic parameters were obtained by application of IKP method. On the basis of M?lek?s criteria and Sest?k-Berggren's method, Sest?k-Berggren's model, f(?)=?M(1-?)N was suggested for all elementary steps, while Master plot method and Perez- Maqueda criteria confirmed suggested reaction models. The thermodynamic activation parameters were calculated for process of complex dehydration, and lifetime for first elementary step of the dehydration and ligand degradation processes was estimated.


2020 ◽  
Vol 39 (2) ◽  
pp. 227
Author(s):  
Adnan Kurt ◽  
Hacer Andan ◽  
Murat Koca

A new conjugated polymer containing a bithiazole group is prepared by the polycondensation of 2,2'-diamino-4,4'-bithiazole and terephthaldialdehyde in the presence of glacial acetic acid. The kinetics of thermal degradation of the new polymer are investigated by thermogravimetric analysis at different heating rates. The temperature corresponding to the maximum rate loss shifts to higher temperatures with increasing heating rate. The thermal decomposition activation energies of the conjugated polymer in a conversion range of 3–15 % are 288.4 and 281.1 kJ/mol by the Flynn–Wall–Ozawa and Kissinger methods, respectively. The Horowitz–Metzger method shows that the thermodegradation mechanism of the conjugated polymer proceeds over a three-dimensional diffusion type deceleration D3 mechanism. The optimum heating rate is 20 ºC/min.


2001 ◽  
Vol 16 (6) ◽  
pp. 1752-1758 ◽  
Author(s):  
Jau-Ho Jean ◽  
Yu-Ching Fang

Cristobalite is formed when initially amorphous Pyrex borosilicate glass (Corning 7740) is fired at temperatures ranging from 700 to 1000 °C. The sigmoidal devitrification kinetics of cristobalite obeys Avrami-like three-dimensional diffusion-controlled kinetics. Activation energy analysis indicates that the diffusion of Na+ in the glass is the rate-limiting step during phase transformation. The above conclusion is further confirmed by calculated and measured results of linear growth rates.


2018 ◽  
Vol 913 ◽  
pp. 765-775 ◽  
Author(s):  
Neng Bin Hua ◽  
Wen Zhe Chen ◽  
Zhen Long Liao

In this study, the effects of Zr content on the bending property, non–isothermal and isothermal crystallization kinetics of high–Zr–based BMGs were investigated. The BMGs exhibit high bending strength and their bending plasticity enhances with increasing Zr content, which is due to more free volume with high–Zr–content. During continuous heating, the crystallization phases for Zr66 and Zr70 BMGs are Zr2Cu and Zr2Ni phases. Zr70 alloy exhibits the highest activation energies for glass transition and crystallization because of the sluggish diffusion of large Zr atoms. Under isothermal condition, the average Avrami exponent of Zr66 alloy modeled by the JMA equation is about 2.6, implying a diffusion–controlled three dimensional crystallization growth with an increasing nucleation rate. The average Avrami exponent of 2.0 for Zr70 alloy indicates a diffusion–controlled three dimensional crystallization growth with a decreasing nucleation rate, which can be attributed to its higher activation energy for crystallization.


2019 ◽  
Vol 8 (3) ◽  
pp. 649-653

Copper perchlorate complex with 4-aminopyridine and water has been prepared with molecular formula [Hg2(C5H6N2)3(ClO4)4].2H2O. It has been characterised by elemental analysis, thermogravimetry, and IR spectroscopic data. Thermal behaviours have been studied by thermogravimetry (TG) in static air and simultaneous thermogravimetry-derivative thermogravimetry analysis (TG-DTG) in flowing nitrogen atmosphere. Complex decomposes in four steps (less resolved). Difference in decomposition under air and inert atmosphere has been also discussed. Kinetics of thermal decomposition has been investigated using isothermal TG data recorded at five different temperatures applying model-fitting as well as isoconversional method on these data. Model-fitting methods have yielded a single value of activation energy whereas isoconversional method has given different values of activation energy for each extent of conversion, α. Response of synthesized complex towards rapid heating has been investigated by recording explosion delay time (DE) at five different temperatures and using these data kinetics of explosion has been analysed. Activation energy for explosion has been also calculated.


2021 ◽  
Vol 2021 ◽  
pp. 1-12 ◽  
Author(s):  
Theodoros Gikarakis ◽  
Ioannis Pappas ◽  
Pothiti Arvanitaki ◽  
Ekaterini Pantazi ◽  
Eleftheria Mitsoni ◽  
...  

The thermal stability and the kinetics of thermal decomposition of statistical copolymers of N-vinylpyrrolidone (NVP) with the alkyl methacrylates, hexyl methacrylate (HMA) and stearyl methacrylate (SMA), were studied by Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG). Statistical copolymers of different compositions were studied, and their thermal decomposition behavior was compared to the corresponding homopolymers. The activation energies of the thermal decomposition were calculated using the Ozawa-Flynn-Wall, the Kissinger, and the Kissinger-Akahira-Sunose methodologies. The effects of the nature of the methacrylate monomer, the copolymer composition, and the rate of heating are discussed.


Author(s):  
Lyudmila А. Kruglyakova ◽  
Rudolf S. Stepanov ◽  
Konstantin V. Pekhotin ◽  
Oksana А. Golubtsova

Thermal decomposition kinetics of 1-substituted bis(1,1-dinitromethyl-3-Nitro-1,2,4-triazole- 5-yl) in solution of 1,3-dinitrobenzene is studied with manometric method under isothermal conditions. The limiting stage of thermal decomposition is homolytic break of C-NO2 bond in gem-dinitromethyl group; activation parameters of this stage are calculated. The reactivity of investigated compounds is analyzed. Correlation dependences between logarithm of rate constant, activation energy and steric constant of substituent R are obtained


Sign in / Sign up

Export Citation Format

Share Document