Ultra-wide bandwidth wavelength selective couplers based on the all solid multi-core Ge-doped fibre

2014 ◽  
Vol 22 (3) ◽  
Author(s):  
X. Li ◽  
B. Sun ◽  
Y. Yu

AbstractA novel wavelength selective coupler based on the all solid nine-core Ge-doped fibre has been proposed. The wavelength selective coupler is based on the phenomenon of a multi-core coupling. All the cores are made of Ge-doped silica and the index of central core is larger than the outer core. At the fixed fibre length, the different wavelength can be selected. The performances of coupling and propagation characteristics have been numerically investigated by using a full beam propagation method (BPM). Simulation results show that the all solid nine-core Ge-doped fibre can achieve simultaneous shorter coupler length and wideband filtering characteristics. The 0.763 mm and 0.745 mm wavelength selective coupler are proposed to achieve different wavelength division and the bandwidth is up to the 400 nm, and 300 nm, respectively.

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Chanderkanta Chauhan ◽  
Brajesh Kumar Kaushik ◽  
Santosh Kumar

AbstractAs energy efficiency is one of the prominent issues in the today’s era. Reversible computing may serve as a critical step toward this paramount issue. Optical reversible computing is one of the tactics to serve this aspiration. In this paper, an optical reversible hybrid adder-subtractor device delineated with the help of electro-optic effect inside lithium-niobate based Mach-Zehnder interferometer (MZI) for WDM applications. The proposed device in this work is combinational circuits and can be used as an adder as well as subtractor in advance applications. The perception is established with the help of simulation results of beam propagation method (BPM) and mathematically proven with MATLAB simulation results.


2014 ◽  
Vol 513-517 ◽  
pp. 4156-4160
Author(s):  
Xiang Zhi Liu ◽  
Fei Lu ◽  
Xiao Ming Wu ◽  
Yong Fu

Channel waveguide formed by multi-energy O2+ ion implantation with different doses is analyzed at both 633 and 1539 nm. It has been demonstrated that the transverse mode number of waveguide is governed by the practical width of the channel waveguide, which depends on not only the channel width from pattern mask, but the lateral straggling of implanted ions. Beam propagation method (BPM) is employed to simulate the possible propagation transverse mode in the waveguides with different widths. The results at 1539 nm show that the waveguide keeps being a single mode waveguide until the width of channel is greater than 15 μm. At 633 nm, TE20 mode can be obtained even the width of channel is very small, and the TE30 mode begins to appear when the width is greater than 9 μm. These simulation results are in good agreement with the experimental results and the calculated results from Marcatilis method.


Sign in / Sign up

Export Citation Format

Share Document