scholarly journals Unification of European height system realizations

2012 ◽  
Vol 2 (4) ◽  
pp. 343-354 ◽  
Author(s):  
A. Rülke ◽  
G. Liebsch ◽  
M. Sacher ◽  
U. Schäfer ◽  
U. Schirmer ◽  
...  

AbstractA suitable representation of the regional gravity field is used to estimate relative offsets between national height system realizations in Europe. The method used is based on a gravimetric approach and benefits from the significant improvements in the determination of the global gravity field by the recent satellite gravity missions the Gravity Recovery and Climate Experiment (GRACE) and the Gravity field and steady-state Ocean Circulation Explorerr (GOCE). The potential of these missions for the unification of height reference frames is analyzed in terms of accuracy and spatial resolution. The results of the gravimetric approach are compared to the independent results of the geodetic leveling approach. Advantages and drawbacks of both methods are discussed.

2020 ◽  
Vol 55 (3) ◽  
pp. 100-117
Author(s):  
Viktor Szabó ◽  
Dorota Marjańska

AbstractGlobal satellite gravity measurements provide unique information regarding gravity field distribution and its variability on the Earth. The main cause of gravity changes is the mass transportation within the Earth, appearing as, e.g. dynamic fluctuations in hydrology, glaciology, oceanology, meteorology and the lithosphere. This phenomenon has become more comprehensible thanks to the dedicated gravimetric missions such as Gravity Recovery and Climate Experiment (GRACE), Challenging Minisatellite Payload (CHAMP) and Gravity Field and Steady-State Ocean Circulation Explorer (GOCE). From among these missions, GRACE seems to be the most dominating source of gravity data, sharing a unique set of observations from over 15 years. The results of this experiment are often of interest to geodesists and geophysicists due to its high compatibility with the other methods of gravity measurements, especially absolute gravimetry. Direct validation of gravity field solutions is crucial as it can provide conclusions concerning forecasts of subsurface water changes. The aim of this work is to present the issue of selection of filtration parameters for monthly gravity field solutions in RL06 and RL05 releases and then to compare them to a time series of absolute gravimetric data conducted in quasi-monthly measurements in Astro-Geodetic Observatory in Józefosław (Poland). The other purpose of this study is to estimate the accuracy of GRACE temporal solutions in comparison with absolute terrestrial gravimetry data and making an attempt to indicate the significance of differences between solutions using various types of filtration (DDK, Gaussian) from selected research centres.


Author(s):  
A. Tugi ◽  
A. H. M. Din ◽  
K. M. Omar ◽  
A. S. Mardi ◽  
Z. A. M. Som ◽  
...  

The Earth’s potential information is important for exploration of the Earth’s gravity field. The techniques of measuring the Earth’s gravity using the terrestrial and ship borne technique are time consuming and have limitation on the vast area. With the space-based measuring technique, these limitations can be overcome. The satellite gravity missions such as Challenging Mini-satellite Payload (CHAMP), Gravity Recovery and Climate Experiment (GRACE), and Gravity-Field and Steady-State Ocean Circulation Explorer Mission (GOCE) has introduced a better way in providing the information on the Earth’s gravity field. From these satellite gravity missions, the Global Geopotential Models (GGMs) has been produced from the spherical harmonics coefficient data type. The information of the gravity anomaly can be used to predict the bathymetry because the gravity anomaly and bathymetry have relationships between each other. There are many GGMs that have been published and each of the models gives a different value of the Earth’s gravity field information. Therefore, this study is conducted to assess the most reliable GGM for the Malaysian Seas. This study covered the area of the marine area on the South China Sea at Sabah extent. Seven GGMs have been selected from the three satellite gravity missions. The gravity anomalies derived from the GGMs are compared with the airborne gravity anomaly, in order to figure out the correlation (R<sup>2</sup>) and the root mean square error (RMSE) of the data. From these assessments, the most suitable GGMs for the study area is GOCE model, GO_CONS_GCF_2_TIMR4 with the R<sup>2</sup> and RMSE value of 0.7899 and 9.886 mGal, respectively. This selected model will be used in the estimating the bathymetry for Malaysian Seas in future.


2003 ◽  
Vol 1 ◽  
pp. 33-38 ◽  
Author(s):  
J. Müller ◽  
M. Wermut

Abstract. The objective of GOCE (Gravity Field and Steady-State Ocean Circulation Explorer) is the determination of the Earth’s gravity field with high spatial resolution. The main science sensor (the gradiometer) measures differential accelerations, from which the gravitational gradients, i.e. the matrix of the second derivatives of the gravitational potential, are derived. Some of them (the diagonal components of the gravitational tensor) are observed with highest accuracy, 4 mE/√Hz in a frequency range from 5 mHz to 100 mHz, whereas the off-diagonals are obtained less accurately. The gradients will be observed in the instrument frame, which approximates the along-track oriented, local orbital frame. For the transformation of the gradients in other frames (e.g. in the strictly earth-pointing frame or a local geodetic frame), the transformation parameters (orientation angles) and all components of the gravity tensor have to be known with sufficient accuracy. We show how the elements of the gravitational tensor and their accuracies look like in the various frames as well as their spectral behaviour, if only the GOCE observations are used for the transformation. Only V'zz keeps approximately its original accuracy in all frames discussed, except in the earth-fixed frame ITRF (International Terrestrial Reference Frame). Therefore we recommend to analyse the gradients as ‘close’ as possible in the observation frame.Key words. Satellite gradiometry, GOCE mission, reference frames, transformation errors


2015 ◽  
Vol 21 (1) ◽  
pp. 189-212 ◽  
Author(s):  
Mohsen Romeshkani ◽  
Mehdi Eshagh

The Earth's global gravity field modelling is an important subject in Physical Geodesy. For this purpose different satellite gravimetry missions have been designed and launched. Satellite gravity gradiometry (SGG) is a technique to measure the second-order derivatives of the gravity field. The gravity field and steady state ocean circulation explorer (GOCE) is the first satellite mission which uses this technique and is dedicated to recover Earth's gravity models (EGMs) up to medium wavelengths. The existing terrestrial gravimetric data and EGM scan be used for validation of the GOCE data prior to their use. In this research, the tensor of gravitation in the local north-oriented frame is generated using deterministically-modified integral estimators involving terrestrial data and EGMs. The paper presents that the SGG data is assessable with an accuracy of 1-2 mE in Fennoscandia using a modified integral estimatorby the Molodensky method. A degree of modification of 100 and an integration cap size of for integrating terrestrial data are proper parameters for the estimator.


2020 ◽  
Vol 224 (2) ◽  
pp. 825-842
Author(s):  
Mohsen Romeshkani ◽  
Mohammad A Sharifi ◽  
Dimitrios Tsoulis

SUMMARY Second- and third-order gravitational potential derivatives can be employed for the determination of the medium- and high-frequency parts of the Earth's gravity field. Due to the Gravity field and steady-state Ocean Circulation Explorer mission, second-order derivatives (SOD) in particular, express currently observed functionals of high accuracy and global coverage. Third-order derivatives (TOD), or gravitational curvature data, provide significant gravity field information when applied regionally. The absence of directly observed TOD data underlines the importance of investigating the relationship between SOD and TOD. This paper discusses the combination of simulated SOD in order to obtain TOD at satellite altitude by applying the spectral combination method. For the determination of TOD integral equations are developed that utilize SOD data at satellite altitude, thus extending the well-known Meissl spectral scheme. The performance of the derived mathematical models is investigated numerically for the test area of Himalayas and the Tibet region. Two different TOD computational strategies are examined. First, we define a deterministic approach that recovers TOD data from noise-free simulated SOD data. Results show that retrieved TOD data at satellite level reach an agreement of the level of 1 × 10−17 m−1s−2 when compared with the true TOD data. Secondly, we propose a new mathematical model based on the spectral combination of integral relations and noisy SOD data with Gaussian noise for recovering TOD. Integral estimators of biased and unbiased types are examined in the cases of SOD data at satellite altitude. The used vertical SOD components show differences between the recovered and true vertical TOD components in the order of 1 × 10−17 m−1s−2 in magnitude, proving the vertical–vertical component of SOD as the best for validating purposes.


2020 ◽  
Vol 12 (12) ◽  
pp. 2066
Author(s):  
Alessandra Borghi ◽  
Riccardo Barzaghi ◽  
Omar Al-Bayari ◽  
Suhail Al Madani

In 2014, the Jeddah Municipality made a call for an estimate of a centimetric precision geoid model to be used for engineering and surveying applications, because the regional geoid model available at that time did not reach a sufficient precision. A project was set up to this end and dedicated sets of gravity and Global Positioning System (GPS)/levelling data were acquired in the framework of this project. In this paper, a thorough analysis of these newly acquired data and of the last available Global Gravity Field Models (GGMs) has been done in order to obtain a geoid undulation estimate with the prescribed precision. In the framework of the Remove–Compute–Restore (RCR) approach, the collocation method was used to obtain the height anomaly estimation that was then converted to geoid undulation. The remove and restore steps of the RCR approach were based on GGMs, derived from the Gravity Field and Steady-State Ocean Circulation Explorer (GOCE) and Gravity Recovery and Climate Experiment (GRACE) dedicated gravity satellite missions, which were used to improve the long wavelength components of the Earth’s gravity field. Furthermore, two different quasi-geoid collocation estimates were computed, based on gravity data only and on gravity plus GPS/levelling data (the so-called hybrid estimate). The best solutions were obtained with the hybrid geoid estimate. This was tested by comparison with an independent set of GPS/levelling geoid undulations that were not included in the computed solutions. By these tests, the precision of the hybrid geoid is estimated to be 3.7 cm. This precision proved to be better, by a factor of two, than the corresponding one estimated from the pure gravimetric geoid. This project has been also useful to verify the importance and reliability of GGMs developed from the last satellite gravity missions (GOCE and GRACE) that have significantly improved our knowledge of the long wavelength components of the Earth’s gravity field, especially in areas with poor coverage of terrestrial gravity data. In fact, the geoid models based on satellite-only GGMs proved to have a better performance, despite the lower spatial resolution with respect to high-resolution models (i.e., Earth Gravitational Model 2008 (EGM2008)).


2014 ◽  
Vol 63 (1) ◽  
pp. 3-24 ◽  
Author(s):  
Walyeldeen Godah ◽  
Malgorzata Szelachowska ◽  
Jan Krynski

Abstract The GOCE (Gravity Field and Steady-State Ocean Circulation Explorer) has significantly upgraded the knowledge on the Earth gravity field. In this contribution the accuracy of height anomalies determined from Global Geopotential Models (GGMs) based on approximately 27 months GOCE satellite gravity gradiometry (SGG) data have been assessed over Poland using three sets of precise GNSS/levelling data. The fits of height anomalies obtained from 4th release GOCE-based GGMs to GNSS/levelling data were discussed and compared with the respective ones of 3rd release GOCE-based GGMs and the EGM08. Furthermore, two highly accurate gravimetric quasigeoid models were developed over the area of Poland using high resolution Faye gravity anomalies. In the first, the GOCE-based GGM was used as a reference geopotential model, and in the second - the EGM08. They were evaluated with GNSS/levelling data and their accuracy performance was assessed. The use of GOCE-based GGMs for recovering the long-wavelength gravity signal in gravimetric quasigeoid modelling was discussed.


Sign in / Sign up

Export Citation Format

Share Document