scholarly journals CLASSROOM ASSESSMENT AND DESIGN EDUCATION

2011 ◽  
Author(s):  
Robert W. Brennan
Keyword(s):  
Engineering Design ◽  
Design Education ◽  
Classroom Assessment ◽  
Experience Teaching ◽  
Engineering Design Education ◽  
Manufacturing Engineering ◽  
Student Projects ◽  
General Work ◽  
Capstone Design

Classroom assessment is a challenge in engineering design given the open-ended nature of student projects, the reliance on multiple assessors, and difficulties around the judgement of “quality”. In this paper, we attempt to place the more general work on classroom assessment in the context of engineering design education. Examples are provided from the author’s experience teaching a mechanical and manufacturing engineering capstone design course and recommendations are made based on this experience.

scholarly journals REFLECTING ON THE USE OF DESIGN METHODOLOGY IN ENGINEERING DESIGN EDUCATION

2019 ◽  
Author(s):  
S. Li ◽  
G. Gress ◽  
P. Ziadé
Keyword(s):  
Engineering Design ◽  
Design Education ◽  
Design Methodology ◽  
Course Delivery ◽  
Engineering Design Education ◽  
Need Support ◽  
Design Activities ◽  
Design Ideas ◽  
Context Free ◽  
Capstone Design

In the teaching of engineering design, it may be common to use design methodology (DM), as documented in several textbooks, in the course delivery.  However, considerable drawbacks could be observed in our case when DM is taken as the major guidance for a capstone design course. We argue that DM tends to prescribe some context-free methods and procedures, which cannot be easily applied by students to their capstone design projects. At the same time, we observe that students need support to characterize a design problem, integrate technical knowledge in design activities and verify design ideas. These aspects require analytical and critical thinking, where DM may not be particularly helpful for students. In the five-year journey of deemphasizing DM in a capstone design course, we have explored and examined various pedagogical approaches such as online modules, design labs and peer evaluations.  Without the teaching of DM, the pedagogical strategy needs to be carefully planned to deliver specific learning in engineering design.  

scholarly journals IMPACT OF TABLET PCS ON CREATIVITY IN ENGINEERING DESIGN EDUCATION

2011 ◽  
Author(s):  
Kevin Firth ◽  
Brian Surgenor
Keyword(s):  
Pilot Study ◽  
Engineering Design ◽  
Design Education ◽  
Tablet Pcs ◽  
Engineering Design Education ◽  
Electronic Design ◽  
Capstone Design

This paper presents experience with Tablet PCs from the perspective of students in a capstone design course. The authors coordinate an industry based capstone design course. As part of a pilot study, four teams in the course were provided with Tablet PCs with the requirement that they use their tablets as individual electronic design notebooks to replace their conventional hardcopy design notebooks. Experience to date indicates that this technology can enhance creativity in engineering design education.

Training the Participatory Renaissance Man: Past Creative Experiences and Collaborative Design

2013 ◽  
Author(s):  
Jonathan Sauder ◽  
Yan Jin
Keyword(s):  
Engineering Design ◽  
Collaborative Design ◽  
Design Education ◽  
Protocol Analysis ◽  
Creative Cognition ◽  
Collaborative Environment ◽  
Engineering Design Education ◽  
Renaissance Man ◽  
Current Engineering ◽  
And Training

Students are frequently trained in a variety of methodologies to promote their creativity in the collaborative environment. Some of the training and methods work well, while others present challenges. A collaborative stimulation approach is taken to extend creative cognition to collaborative creativity, providing new insights into design methodologies and training. An experiment using retrospective protocol analysis, originally conducted to identify the various types of collaborative stimulation, revealed how diversity of past creative experiences correlates with collaborative stimulation. This finding aligns with previous research. Unfortunately, many current engineering design education programs do not adequately provide opportunities for diverse creative experiences. As this study and other research has found, there is a need to create courses in engineering design programs which encourage participation in diverse creative activities.

A Pillar of Mechanical Engineering Design Education in Australia: 25 Years of the Warman Design and Build Competition

2013 ◽  
Author(s):  
Warren F. Smith
Keyword(s):  
Engineering Design ◽  
Design Education ◽  
Mechanical Engineering ◽  
Engineering Students ◽  
Student Assessment ◽  
National Committee ◽  
Engineering Design Education ◽  
Wide Range ◽  
Institutional Learning ◽  
History Of

The “Warman Design and Build Competition”, running across Australasian Universities, is now in its 26th year in 2013. Presented in this paper is a brief history of the competition, documenting the objectives, yearly scenarios, key contributors and champion Universities since its beginning in 1988. Assuming the competition has reached the majority of mechanical and related discipline engineering students in that time, it is fair to say that this competition, as a vehicle of the National Committee on Engineering Design, has served to shape Australasian engineering education in an enduring way. The philosophy of the Warman Design and Build Competition and some of the challenges of running it are described in this perspective by its coordinator since 2003. In particular, the need is for the competition to work effectively across a wide range of student group ability. Not every group engaging with the competition will be competitive nationally, yet all should learn positively from the experience. Reported also in this paper is the collective feedback from the campus organizers in respect to their use of the competition as an educational experience in their classrooms. Each University participating uses the competition differently with respect to student assessment and the support students receive. However, all academic campus organizer responses suggest that the competition supports their own and their institutional learning objectives very well. While the project scenarios have varied widely over the years, the intent to challenge 2nd year university (predominantly mechanical) engineering students with an open-ended statement of requirements in a practical and experiential exercise has been a constant. Students are faced with understanding their opportunity and their client’s value system as expressed in a scoring algorithm. They are required to conceive, construct and demonstrate their device with limited prior knowledge and experience, and the learning outcomes clearly impact their appreciation for teamwork, leadership and product realization.

Challenges and Strategies in Remote Design Collaboration During Pandemic: A Case Study in Engineering Education

2021 ◽  
Author(s):  
Elise Belanger ◽  
Caroline Bartels ◽  
Jinjuan She
Keyword(s):  
Engineering Design ◽  
Design Education ◽  
College Education ◽  
Team Members ◽  
Face To Face ◽  
Design Collaboration ◽  
Engineering Design Education ◽  
Geographically Distributed ◽  
Remote Design ◽  
Challenges And Strategies

Abstract The COVID-19 pandemic forced college education to shift from face-to-face to online instruction. This effort is particularly challenging for freshmen and sophomore students, in engineering design projects where collaborations are needed. The study aims to qualitatively understand challenges and possible strategies revealed by students in remote design collaboration through the lens of an undergraduate-level engineering design introduction class. The authors closely observed team members’ struggles and how they handled them through bi-weekly and final reflections in a semester-long project. The challenges and strategies from 11 teams (42 students) were analyzed and implications for future engineering design education were discussed. The findings provide insights to experimentations that aim to establish a successful remote learning environment that reaches core education objectives of engineering design while also helping students adapt to a geographically distributed engineering workforce in future. The study also illustrated the usefulness of reflections as a tool to capture students’ learning dynamics.

AN EXPERIENTIAL LEARNING APPROACH FOR DEVELOPING MENTAL MODELS IN ENGINEERING DESIGN EDUCATION

2021 ◽  
Author(s):  
S. Li ◽  
C. Chua
Keyword(s):  
Experiential Learning ◽  
Engineering Design ◽  
Mental Models ◽  
Design Education ◽  
Mental Simulation ◽  
Learning Approach ◽  
Engineering Design Education ◽  
Design Activities ◽  
Support Engineering ◽  
Prior Experiences

Mental simulation represents how a person interprets and understands the causal relations associated with the perceived information, and it is considered an important cognitive device to support engineering design activities. Mental models are considered information characterized in a person’s mind to understand the external world. They are important components to support effective mental simulation. This paper begins with a discussion on the experiential learning approach and how it supports learners in developing mental models for design activities. Following that, the paper looks at the four types of mental models: object, making, analysis and project, and illustrates how they capture different aspects and skills of design activities. Finally, the paper proposes an alternative framework, i.e., Spiral Learning Approach, which is an integration of Kolb’s experiential learningcycle and the Imaginative Education (IE) framework. While the Kolb’s cycle informs a pattern to leverage personal experiences to reusable knowledge, the IE’s framework suggests how prior experiences can trigger imagination and advance understandings. A hypothetical design of a snow removal device is used to illustrate the ideas of design-related mental models and the spirallearning approach.

Sign in / Sign up

Export Citation Format

Share Document