scholarly journals Makarnalık Buğdayda (Triticum Durum L.) Bölünerek Verilen Üst Gübre Uygulamalarının Verim ve Verim Komponentleri Üzerine Etkisi

2021 ◽  
Vol 9 (11) ◽  
pp. 2041-2048
Author(s):  
Arzu Mutlu
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Yield Components ◽  
Triticum Durum ◽  
Block Design ◽  
Wheat Variety ◽  
Growing Season ◽  
Spike Length ◽  
Randomized Complete Block Design ◽  
The World

This research was conducted with durum wheat variety (Alatay) at farmer conditions in Bozova district of Şanlıurfa province in 2018-19 and 2019-20 growing season according to a randomized complete block design with three replications. This study was conducted to determine the effect of dividing the top fertilizer in different development periods of wheat on grain yield and some yield factors (plant height, spike length, number of grains per spike, grain weight per spike) in order to struggle the drought experienced due to global warming in the world and in our country. According to the research results, it was determined that grain yield, plant height, spike length, number of grains per spike, weight of grains per spike ranged from 347.50-648.33 kg/da, 78.16-98.33 cm, 6.28-6.91 cm, 32.00 number/spike and 64.16 number/spike 2.47 gr/spike and 2.77 gr/spike respectively. The aim of the experiment is to determine how the top-dressing is divided and how the plant benefits from the moisture and nitrogen fertilizer in the soil and how it affects the grain yield and yield components of the plant.

scholarly journals Effect of spacing and corm size on growth and spike production of gladiolus

2019 ◽  
Vol 5 (3) ◽  
pp. 226-230
Author(s):  
Nusrat Jahan Methela ◽  
Md Ridowan Al Zihad ◽  
Mohammad Shafiqul Islam ◽  
Md Habibur Rahman
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Spike Length ◽  
Plant Spacing ◽  
Maximum Weight ◽  
Randomized Complete Block Design ◽  
The World ◽  
Number Of Leaves ◽  
Spike Initiation ◽  
L2 Medium

Gladiolus is high demandable and popular flower all over the world. The present study was conducted to investigate the effect of plant spacing and corm size on growth and spike production of gladiolus. The two factor experiment was laid out in Randomized Complete Block Design (RCBD). Three plant spacing like S1= 25×20 cm, S2= 20×30 cm and S3= 25×30 cm and corm size like L1=Small corm, (30±2 g), L2=Medium corm (35±2 g), L3=Large corm (>40g) were maintained to investigate the study. Plant spacing and corm size had significant effect on days to 80% emergence, plant height, number of leaves, days required for first spike initiation, spike length, rachis length, number of florets per spike and weight of spike. The highest number of plant height (74.61 cm), maximum number of leaves (7.98), top most length of spike (70.00), utmost rachis length (48.77 cm), largest number of florets per spike (14.33) and maximum weight of spike (35.60) were obtained from the plant spacing 25x30cm and largest corm size > 40g. Therefore, the results of the present study revealed that widest plant spacing 25×30 cm and large corm (>40g) were found to be the best for growth of spike production of gladiolus. Asian J. Med. Biol. Res. June 2019, 5(3): 226-230

scholarly journals Green ear yield and grain yield of maize cultivars in competition with weeds

2010 ◽  
Vol 28 (1) ◽  
pp. 77-85 ◽  
Author(s):  
P.S.L. Silva ◽  
K.M.B. Silva ◽  
P.I.B. Silva ◽  
V.R. Oliveira ◽  
J.L.B. Ferreira
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Block Design ◽  
Corn Yield ◽  
Modern Agriculture ◽  
Maize Cultivars ◽  
Randomized Complete Block Design ◽  
Ear Height ◽  
Herbicide Use ◽  
Ground Part

The reduction in herbicide use is one of the greatest interests for modern agriculture and several alternatives are being investigated with this objective, including the adoption of cultivars that suppress weeds. The objective of this study was to verify if maize cultivars develop differently, in competition with weeds, to produce green ears and grain. Randomized complete block design was used, with split-plots and five replications. Cultivars DKB 390, DKB 466, DKB 350, AG 7000, AG 7575 and Master, were evaluated in the plots, without weeding and two weedings (at 22 and 41 days after sowing) in sub plots. Twenty-one species were identified in the experimental area, the most frequent being Gramineae (Poaceae), Euphorbiaceae, Leguminosae (Fabaceae) and Convolvulaceae species. There was no difference in the dry biomass above-ground part of the weeds in the plots of the evaluated cultivars. The cultivars behaved similarly in treatments with or without hoeing, except for plant height and ear height evaluations. Without hoeing, plant height increased in cultivar DKB 390, while plant height and ear height decreased in cultivar AG 7575. In the other cultivars, these traits did not change under weed control. The presence of weeds decreased the values of all traits employed to assess green corn yield, with the exception of the total number of green ears and grain yield.

scholarly journals Evaluation of Urea Super Granule as a Source of Nitrogen in Transplant Aman Rice

2014 ◽  
Vol 24 (1-2) ◽  
pp. 29-37 ◽  
Author(s):  
TA Qurashi ◽  
MA Salam ◽  
M Jannat ◽  
MG Rabbani
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Block Design ◽  
Prilled Urea ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Use Efficiency ◽  
Experimental Treatments ◽  
N Management ◽  
1000 Grain Weight

An experiment was carried out at Bangladesh Agricultural University, Mymensingh to evaluate the effect of urea super granule (USG) as a source of nitrogen on the yield and yield components of transplant Aman rice cv. BRRI dhan39, BRRI dhan46 and BINA dhan7. Five levels of N (viz., 0, 60, 120 kg ha-1 as prilled urea and 60 and 120 kg ha-1 as USG) were taken as experimental treatments. The experiment was laid out in a randomized complete block design with three replications. Plant height, effective tillers hill-1, grains panicle-1 and grain yield varied significantly due to different cultivars. All the yield and yield components except 1000-grain weight were influenced significantly by the levels of nitrogen fertilizer. The highest grain yield (4.82 t ha-1) was recorded in BINA dhan7 and the lowest one (4.30 t ha-1) was recorded in BRRI dhan39. Nitrogen @ 120 kg ha-1 as USG performed the best among the treatments in respect of yield and yield components of rice. The highest grain yield (5.46t ha-1) was obtained from BINA dhan7 with 120 kg N ha-1 as USG which was statistically identical with 60 kg N ha-1 as USG. A considerable amount (31.25%) of prilled urea (PU) nitrogen could be saved by using USG. It may be concluded that USG could be used as N management to achieve better nitrogen use efficiency in reducing N loss than the PU.DOI: http://dx.doi.org/10.3329/pa.v24i1-2.19095 Progress. Agric. 24(1&2): 29 - 37, 2013

scholarly journals Penampilan Fenotipik Karakter Hasil Galur Harapan Padi Rawa di Lahan Pasang Surut Karang Agung, Sumatera Selatan

2016 ◽  
Vol 17 (1) ◽  
pp. 19
Author(s):  
Rini Hermanasari ◽  
NFN Supartopo ◽  
B. Kustianto
Keyword(s):  
Plant Height ◽  
Yield Components ◽  
Rice Field ◽  
Block Design ◽  
Yield Component ◽  
Yield Potential ◽  
Lower Yield ◽  
Tidal Swamp ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components

<p>Phenotypic Performance of Yield and Yield Component of Rice Promising Lines at Tidal Swamp Area in Karang Agung, South Sumatra. An experiment was conducted in Karang Agung, in April until September 2007. The experiment aimed at evaluating phenotypic performance of yield and yield components of promising lines in tidal swamp rice field. The experiment was arranged in a Randomized Complete Block Design with 16 treatments and four replications. The promising lines tested were B9858-KA-55, B9833C-KA-14, B9852E-KA-66, B5524G-SM-61-2-1, B7003D-MR-24-3-1, KAL9414F-MR-2-KN-0, KAL9418F-MR-2-KN-0, B10214FTB- 7-2-3, IR70213-9-CPA-12-UBN-2-1-3-1, IR70215-2- CPA-2-1-B-1-2. The check varieties used were IR42, Batanghari and Lembu Sawah. The results of this experiment showed that IR61242-3B-B-2 had better performance among varieties and promising lines tested, as well as giving the highest yield potential. Meanwhile, the line B10214F-TB-7-2- 3 had better performance of number of filled grain, and 1.000 grain weight. It also showed higher yield potential compared to IR42 and Batanghari. The line KAL9418F-MR-2-KN-0 had better performance of plant height, 1.000 weight grain and harvest age, but showed lower yield potential compared to those other check varieties.</p><p> </p><p><strong>Abstrak</strong></p><p>Percobaan dilaksanakan di KP Karang Agung, Sumatera Selatan pada bulan April sampai September 2007. Penelitian bertujuan untuk mendapatkan informasi tentang penampilan fenotipik karakter hasil dan komponen hasil dari galur-galur harapan padi rawa di lahan pasang surut Karang Agung. Percobaan ditata dalam rancangan acak kelompok dengan 16 perlakuan dan empat ulangan. Galur-galur yang diuji di antaranya B9858-KA-55, B9833C-KA-14, B9852E-KA-66, B5524GSM- 61-2-1, B7003D-MR-24-3-1, KAL9414F-MR-2-KN-0, KAL9418F-MR-2-KN-0, B10214F-TB-7-2-3, IR70213-9- CPA-12-UBN-2-1-3-1, dan IR70215-2-CPA-2-1-B-1-2. Varietas pembanding digunakan IR42, Batanghari, dan Lembu Sawah. Hasil penelitian menunjukkan bahwa galur IR61242- 3B-B-2 memiliki penampilan lebih baik dari varietas pembanding untuk karakter tinggi tanaman, jumlah gabah isi, bobot 1.000 butir gabah, dan potensi hasil. Galur B10214F-TB-7-2-3 memberikan penampilan lebih baik untuk karakter jumlah gabah isi, bobot 1.000 butir, dan potensi hasil lebih tinggi daripada pembanding IR42 dan Batanghari. Galur KAL9418F-MR- 2-KN-0 memiliki penampilan lebih baik untuk karakter bobot 1.000 butir, tinggi tanaman, dan umur panen, tetapi potensi hasilnya lebih rendah dari ketiga varietas pembanding.</p>

scholarly journals Initial response of phenology and yield components of wheat (Triticum durum L., CIRNO C2008) under experimental warming field conditions in the Yaqui Valley

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5064 ◽  
Author(s):  
Jaime Garatuza-Payan ◽  
Leandris Argentel-Martinez ◽  
Enrico A. Yepez ◽  
Tulio Arredondo
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Yield Components ◽  
Triticum Durum ◽  
Canopy Temperature ◽  
Initial Response ◽  
Experimental Warming ◽  
Biological Cycle ◽  
Yaqui Valley ◽  
System Temperature

This work evaluates the experimental warming effects on phenology and grain yield components of wheat in the Yaqui Valley, Sonora, México, using CIRNO C2008 variety from Triticum durum L., as a model during the cropping cycle of 2016–2017 (December to April). Infrared radiators were deployed to induce experimental warming by 2 °C above ambient crop canopy temperature, in a temperature free-air controlled enhancement system. Temperature was controlled by infrared temperature sensors placed in eight plots which covered a circle of r = 1.5 m starting five days after germination until harvest. The warming treatment caused a reduction of phenophases occurrence starting at the stem extension phenophase. Such phenological responses generated a significant biological cycle reduction of 14 days. Despite this delay, CIRNO C2008 completed its biological cycle adequately. However, plant height under the warming treatment was reduced significantly and differences were particularly observed at the final phenophases of the vegetative cycle. Plant height correlated negatively with spikes length, spikes mass, and number of filled grains. Warming also reduced grain yield in 33%. The warming treatment caused a stress intensity (SI = 1-yield warming/yield control) of 39.4% and 33.2% in biomass and grain yield, respectively. The differences in stress intensities between biomass and grain yield were based on plant height reduction. Grain mass was not affected, demonstrating the crop capability for remobilization and adequate distribution of elaborated substances for the spikes under warming conditions.

scholarly journals Planting Density and Soybean (Glycine max L.) Cultivars Effects on Yield Components in the Amazon

2020 ◽  
Vol 8 (3) ◽  
pp. 63
Author(s):  
Priscila Pereira Sacramento ◽  
Letícia Cunha da Hungria ◽  
Jamil Chaar El-Husny ◽  
Luis De Souza Freitas
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Yield Components ◽  
Block Design ◽  
Planting Density ◽  
Maximum Height ◽  
Soybean Cultivars ◽  
Linear Behavior ◽  
Randomized Block Design ◽  
Glycine Max L

The aim of this study was to evaluate the influence of planting density and cultivar of soybean on yield components in the southeast Amazon. The experiment was carried out in an Oxisol, with a randomized block design in a 2 x 4 factorial scheme. The treatments were two soybean cultivars (BRS 9090 RR and BRS 8990 RR) and four planting densities (13, 15, 18 and 20 plants m-1), with three replications. First pod insertion height (IFP), plant height (H), number of pods per plant (NPP), grain yield (Y) and weight of 100 grains (W100) were evaluated. The insertion height of the first pod showed a tendency of increase with the increment of plants per linear meter for cultivar BRS 8990 RR, different of the behavior observed for the cultivar BRS 9090 RR, which only showed difference when the density of 300.000 plants ha-1 was tested. For plant height, among soybean cultivars, there was only difference in D400, with BRS 8990 RR showing a maximum height of 83.3 cm, 21% higher than BRS 9090 RR. When evaluated under D350, BRS 8990 RR showed an increase of 13% in the number of pods compared to BRS 9090 RR. Both cultivars showed linear behavior for the grain yield, increasing according the plant population, with the highest grain yield obtained under the density of 400.000 plants ha-1 (4527.3 kg ha-1). The weight of 100 grains was not influenced by any variation factor.

scholarly journals Evaluation of Yield, Reaction to Diseases, and Grain Physical Attributes of Some Introduced Rice Hybrids in Ghana

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Samuel Oppong Abebrese ◽  
Alex Yeboah ◽  
Wilson Dogbe ◽  
Paul Kofi Ayirebi Dartey ◽  
Richard Akromah ◽  
...  
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Hybrid Rice ◽  
Block Design ◽  
Leaf Blight ◽  
Rice Production ◽  
Bacterial Leaf Blight ◽  
Yield Potential ◽  
Randomized Complete Block Design ◽  
Physical Attributes

Hybrid rice technology is one of the promising, sustainable, and proven technologies for increasing rice production and productivity with a yield advantage of 15–30% over modern inbred varieties. The potential of hybrid rice has so far not been exploited in Ghana. This study was undertaken to evaluate the yield potential, reaction to diseases, and physical grain attributes of some introduced hybrids. The trials were laid out in a randomized complete block design (RCBD) with three replicates across three locations. Data were taken on grain yield, yield components, reaction to diseases, and grain physical characteristics. Four promising hybrids (SWARNA 2, ARGH 1501, ARGH 1502, and ARGH 1503) with a mean yield advantage of 15–20.8% over the best inbred check “AgraRice” were identified. With few exceptions, the hybrids were broadly adapted and had adequate resistance to blast and bacterial leaf blight. Most of the test hybrids had long slender grains which make them acceptable to the Ghanaian market but lacked aroma.

scholarly journals Response of wheat yield and its components to zinc and iron application under different levels of nitrogen

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Gheith El-Sayed ◽  
◽  
Ola El-Badry ◽  
Keyword(s):  
Grain Yield ◽  
Protein Content ◽  
Plant Height ◽  
Block Design ◽  
Wheat Yield ◽  
Grain Protein Content ◽  
Yield Component ◽  
Grain Protein ◽  
Research Station ◽  
Randomized Complete Block Design

To evaluate the effect of nitrogen, zinc and iron as soil application on yield and yield component of wheat, the present study was conducted at Agricultural and Experimental Research Station at Giza, Faculty of Agriculture Cairo University, Egypt during 2015/2016 and 2016/2017 seasons. The experimental design was split-plot in randomized complete block design with three replications. Results showed that positive significant effect on plant height, number of spike/m2, spike length; number of grain per spike, grain yield per unit area in both seasons and grain protein content in one season were achieved by application of N and the micronutrients. Whoever, the highest significant in the above mentioned characters was obtained either by application the highest N levels (100kg N /fed.) or in addition to mixture of Zn and Fe. The interaction between the studied factors had significant effect on plant height and grain yield in both seasons as well as on grain protein content in the second season, where the highest values of these parameters were recorded by application of 100kg N/fed., Zn and Fe in mixture.

scholarly journals Zinc, a micronutrient and its effect to performance of BARI gom30

2020 ◽  
Vol 8 (2) ◽  
pp. 137
Author(s):  
Salamun Gismy ◽  
Md. Romij Uddin ◽  
Md. Sohanur Rahman ◽  
Fakhar Uddin Talukder ◽  
Md. Shafiul Islam Rion
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Block Design ◽  
Maximum Yield ◽  
Grain Weight ◽  
Spike Length ◽  
Control Treatment ◽  
Straw Yield ◽  
Four Levels ◽  
1000 Grain Weight

To evaluate the effect of Zinc fertilizer on performance of wheat cv. BARI gom30, an experiment was carried out at Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh, from November 2015 to March 2016. The experiment comprised four levels of Zinc (Zn) viz., 0, 1.5, 2 and 2.5 kg/ha. The experiment was laid out in a randomized complete block design with three replications. Application of Zinc (Zn) plant height, number of total tillers/plant, number of effective tillers/plant, spike length, number of fertile spikelets/spike numbers of sterile spikelets/spike number of grains/ spike, grain yield and straw yield were found significant. But there was no significant effect of the treatment on 1000-grain weight. The highest number of total tiller/plant (4.42), number of effective tillers/plant (3.92), number of grains/spike (47.70), 1000-grain weight (47.73 g), grain yield (5.06 t/ha), straw yield (6.21 t/ha) was obtained from 2 kg Zn/ha. The highest plant height (94.08 cm), spike length (9.92 cm), number of fertile spikelets/spike (19.59) and sterile spikelets/spike (3.22) and harvest index (46.16%) were recorded at 0 kg Zn/ha respectively. The control treatment indicated the lowest value for the yield attributing characters except the number of sterile spikelets/spike. Grain yield was found to be significantly and positively correlated with number of grains/spike and straw yield. It is recommended that application of 2 kg Zn/ha is the best for maximum yield of BARI gom30.   

scholarly journals VARIABILITY AND CORRELATION OF AGRONOMIC CHARACTERS OF MUNGBEAN GERMPLASM AND THEIR UTILIZATION FOR VARIETY IMPROVEMENT PROGRAM Lukman Hakim

2016 ◽  
Vol 9 (1) ◽  
pp. 24 ◽  
Author(s):  
Lukman Hakim
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Seed Size ◽  
Yield Components ◽  
Block Design ◽  
Breeding Program ◽  
Path Coefficient ◽  
Individual Plant ◽  
Agronomic Characters ◽  
Improvement Program

Information on the variability and correlation between agronomic characters of mungbean accessions with their yield are important for supporting breeding program of the plant. A total of 350 mungbean accessions were evaluated at Muara Experimental Farm, Indonesian Center for Food Crops Research and Development, Bogor, during the dry season of 2005. The experiment was conducted in a completely randomized block design with three replications. Each accession was planted in two rows of 5 m long. Plant spacing was 40 cm x 20 cm, two plants per hill. Correlation and path coefficient analyses were used to quantify<br />the magnitude of the relationship between yield components and grain yield. The variability among the accessions was significant for most of the characters studied, especially for days to maturity, plant height, pods per plant, and seed size. Among the yield components, the number of pods per plant and plant height positively correlated with the grain yield, but the<br />seed size negatively correlated with grain yield. The direct effects of the number of pods per plant and plant height on seed yield as indicated by path coefficient were the highest, while other causal effects were small or negative. Yield variation (1- R2) attributable to the nine yield component variables was slightly high (61.23%), which means that mungbean accessions with high grain yield should have sufficient plant height and high number of pods per plant. Therefore, these parameters (number of pods per plant and plant height) can be used as the selection criteria in mungbean breeding program. These criteria can be visualized during bulk selection on the early generation stage of F2 to F4, and subsequently on line development of individual plant (pedigree) of F5.

Sign in / Sign up

Export Citation Format

Share Document