scholarly journals A SWOT analysis of the construction and demolition waste management practices in Qatar

Author(s):  
A. T. Abulebdah ◽  
F. Musharavati
Author(s):  
Sandy Rebelo Bandeira ◽  
Jasminne Belentani Souza Maciel ◽  
João Carlos Silva de Oliveira ◽  
Antonio Estanislau Sanches

Author(s):  
Anjali Sanil Kumar ◽  
Sethulakshmi Sanitha Shajan

Construction and demolition waste are the major issue as a direct consequence of increased global urbanization. It impacts the environmental efficiency of the construction industry, contributing to 35% of the global landfill. This research considers the two main fundamental factors affecting the demolished building waste management, which are the management hierarchy including the 3R strategies and the project life cycle and management tools. The inappropriate treatment and disposal of Construction and demolition waste give rise to the environmental pollution, land price, and natural resource consumption. This paper scrutinizes the concept of Construction and demolition waste management and review the extant studies in the managerial areas of Construction and demolition waste. These findings are aimed at clarifying the current and future practices of Construction and demolition waste management practices with an understanding for the sustainable governance. Keywords: Construction and demolition waste, management, review.


2018 ◽  
Vol 20 (1) ◽  
pp. 83-87 ◽  

One of the most important environmental problems is municipal solid waste management (MSWM) as a result of the rapid rise in waste generation due to industrialization, economic development, urbanization, and rapid population growth in Turkey. The collection, transportation, and disposal of solid waste are conducted by municipal authorities of Turkey. The waste management problem is getting more serious due to some reasons such as lack of enforcement of regulations, weak technical and financial resources, poor infrastructure, insufficient policies and deficiency of political priorities, poor coordination between authorities. Hence, despite the legislation, municipal solid wastes are managed in an unscientific manner by the municipalities. The SWOT analysis is a perfect tool to discover the possibilities and ways for successfully implementing the MSWM. In this study, SWOT analysis carried out both negative and positive concerns of MSWM. A successful strategic management has been identified from the SWOT analysis for the municipal solid wastes. Further, the study proposes options based on SWOT analysis approach to improve in available waste management practices that could also be adopted by other countries to decrease the adverse effect of MSW on human and environment health.


2020 ◽  
Vol 38 (4) ◽  
pp. 460-471 ◽  
Author(s):  
John N. Hahladakis ◽  
Phil Purnell ◽  
Hareb Mohammed S.J. Aljabri

Rapid industrial development, mega construction projects and increased immigration are some of the reasons that the State of Qatar has recently generated an unprecedented amount of construction and demolition (C&D) waste in the country. The State is racing towards the Fédération Internationale de Football Association World Cup 2022, a fact that requires additional construction, for which it is expected to increase its rate of waste generation. Compared to other regions, there are relatively few studies in the literature that report on the C&D waste management issues of Qatar. The present work begins to address this gap by providing insights into the current state of C&D waste management practices in Qatar and by providing a mini-review on the benefits of using recycled aggregates which have only recently been allowed locally by Qatar Construction Standards. A Strengths, Weaknesses, Opportunities, and Threats analysis has been implemented, using data and information from various sources including governmental reports, industries, local waste management companies, as well as reported interviews with relevant stakeholders. Finally, several strategies were proposed and developed that could potentially be implemented by stakeholders and decision-makers, so as to improve the current status by encouraging more sustainable and viable practices.


2020 ◽  
Vol 12 (23) ◽  
pp. 9931
Author(s):  
Savindi Caldera ◽  
Tim Ryley ◽  
Nikita Zatyko

Rapid population growth and urbanization have led to an increase in Construction and Demolition (C&D) waste, prompting government and industry bodies to develop better waste management practices. Waste trading has emerged as a targeted intervention to divert waste from landfill sites and create a second life for waste material. This paper examines key barriers and enablers influencing the creation of a marketplace for waste trading. A systematic literature review was undertaken to examine global efforts in creating a marketplace for C&D waste. A framework on enablers and barriers for developing a marketplace for C&D waste emerged from the review, based on market-based, operational, and governance factors. References demonstrated that markets for materials such as glass and metals have already been established, but there are increasing marketplace opportunities for other recycled materials. Technology-based market applications are emerging as targeted interventions to facilitate online trading, which will provide a more accessible and user-friendly marketplace for sellers and buyers. Further research should test the complex interactions between people and technology associated with online waste trading platforms, as well as help develop the business case for a C&D waste marketplace.


2019 ◽  
Vol 8 (2S3) ◽  
pp. 1665-1667

Rising amount of generated waste is an increasing concern for the future generation potentially at risk. The purpose of this research was to identify the risks and opportunities associated with waste management practices in Malaysia TVET Institution as per requirements under ISO 9001:2015 Clause 6.1. Using Risk-Based Thinking (RBT), Preliminary Risk Assessment (PRA) and SWOT Analysis, this research analyzed the hazardous events of managing Municipal Solid Waste (MSW) and Hazardous Waste (HW). The risks associated with MSW divided into 5 categories; human damage, climate pollution, soil, air and water contamination. Whereas, HW risks US EPA characteristics were ignitable, corrosive, reactive and toxic. The findings presented in Risk Matrix (High, Medium or Low level), revealed that the top ranking risk for MSW was fatal diseases and misplacing SW4 for HW. The research recommended more ground works in RBT application as it involves thorough look at workplace to establish a most-to-least-critical importance ranking


Buildings ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 150 ◽  
Author(s):  
Nigel Narcis ◽  
Indrajit Ray ◽  
Gino Hosein

A study was conducted to identify the primary sources and types of construction and demolition (C&D) waste, determine current and potential management actions which can be applied to the respective wastes, and assess the potential benefits, barriers, and recommendations towards the implementation of a C&D waste management plan in Trinidad and Tobago—a Caribbean Small Island Developing State (SIDS). This process is lacking locally, and will benefit decision makers and other stakeholders in proper management of C&D waste. Currently, the primary method of waste disposal is landfilling. The structured questionnaire survey method was used to collect the data, and data were analyzed by descriptive statistics and one-way ANOVA with appropriate post-tests. Results showed that wood, plastic, cardboard, gypsum board, and steel were identified as the most wasted materials on site, with the top sources being attributable to design, operations, and residual causes. It can be inferred that if materials are not being reused, they are being landfilled, as these were the two primary waste treatment methods identified as being used for all materials. If waste management practice gathers enough support from all respective authorities and stakeholders, the general consensus is that all materials listed have recycle/reuse potential in Trinidad and Tobago. The top agreed upon advantages of C&D waste management were all directly related to sustainability, and the barriers to implementation identified were related to general lack of support from respective stakeholders and authorities. From the overall results, it can be concluded that there is not enough evidence to suggest that larger contractors have more positive attitudes and behaviors towards C&D waste management. Although the data are local, the findings from this research can be used as guidelines by the other Caribbean SIDS nations in formulating/comparing their own waste management practices.


2020 ◽  
Author(s):  
Thais Silva ◽  
Renata Maciel ◽  
Lourdinha Florencio ◽  
Simone Machado Santos

Abstract Home health services are of great concern, as infectious diseases can be transmitted not only to residents but also to home health care workers. Worldwide, there are few studies related to home health waste management. Before the COVID-19 pandemic, a survey on waste management from home health care services was carried out between October and December 2019. In the survey, all 67 stakeholders (health teams and caregivers/patients) involved in home health care services in the municipality of Caruaru (Brazil) were interviewed. The collected data showed that the home health care and waste management practices identified during field visits would be severely impacted by the pandemic. In this context, a SWOT analysis and TOWS matrix were employed in the analysis of home health care practices; in this work, those practices include care provided by health teams and patient caregivers, encompassing the handling of waste resulting from health care. The results show the need to promote strategies to improve home health care services to preserve the health of professionals and patients in the pandemic and post-pandemic periods. In this context, care related to the transmission of COVID-19 has been ratified, generating additional actions for the proper management of health waste.


Sign in / Sign up

Export Citation Format

Share Document