The results of an experimental study of the attenuation of the fluxes of the low-energy component of the plasma formed during the operation of electric propulsion engines (ERE), ventilation holes (VH) of the non-sealed equipment compartment (NSEC) of the spacecraft (SC) are presented. Authors studied the attenuation of plasma fluxes by standard VHs made in honeycomb panels that form the NSEC. A Hall-effect engine of the SPT-70 type was used as a plasma source. The experiment consisted of measuring the plasma concentration at the inlet and outlet of the VH. The concentration at the inlet was measured with a flat Langmuir probe, and at the outlet with a Faraday probe, which allows collecting all ions passing through the VH. The aim of the work was to study the weakening of the fluxes of the lowenergy component of the EJE plasma when passing through the VH in the honeycomb-nels that form the NSEC. Based on the experimental data, a semi-empirical model was constructed that describes the dependence of the attenuation coefficient of plasma flows on the geometric parameters of the vent-holes. It has been established that a vent-holes of this design attenuates the plasma flows by 102 ... 104 times. The largest contribution to the weakening of plasma fluxes is made by the honeycomb filler, which is due to the recombination of ions during their collision with the channel walls. Taking into account the attenuation of the fluxes of the low-energy component of the plasma of electric rocket engines by ventilation holes is a key stage in assessing the effect of plasma on the power on-board equipment of spacecraft and should be used by spacecraft developers when analyzing the resistance to this factor.
Study on Electrodeless Electric Propulsion in High-Density Helicon Plasma with Permanent Magnets