Lunar descent and landing via two-phase explicit guidance and pulse-modulated reduced-attitude control

2022 ◽  
Author(s):  
Mauro Pontani ◽  
Fabio Celani ◽  
Stefano Carletta
Keyword(s):  
Attitude Control ◽  
Two Phase ◽  
Lunar Descent

Characteristics of Two Phase Fluids as Microthruster Propellant

2009 ◽  
Author(s):  
John Lee ◽  
Adam Huang
Keyword(s):  
Attitude Control ◽  
Orbital Elements ◽  
Two Phase ◽  
Multiple Points ◽  
Limited Ability ◽  
Small Satellites ◽  
Orbital Maneuvers ◽  
Orbital Maneuver ◽  
R 134A ◽  
Micro Propulsion

Nano- and picosatellites are small satellites that are a more affordable alternative to larger satellites. Nanosats are satellites with a mass ranging from 1kg to 10kg while picosats have a mass that ranges from 0.1kg to 1kg. In addition to their cost, the smaller satellites have the advantage that they are able to carry out missions that would be difficult for a larger satellite. These advantages include using formations to gather data from multiple points and in-orbit inspection of larger satellites. Nano/picosats can be fabricated or procured for under $25k and launched into space for around another $40–60k which makes the total pre-mission expenditures for the satellite under $100k. Currently these satellites have a limited ability to orient themselves and cannot perform orbital maneuvers. For example a satellite could potentially use electro-magnetically charged coils in conjunction with earth’s magnetic field to orient themselves. The problems with the current methods of orientation are they are extremely slow to damp out oscillations due to low power (minutes) and cannot execute out of orbit maneuvers. Once a satellite is deployed from its launcher it is on a set orbit and cannot change its orbital elements on-command for the duration of its mission, limiting their use for science missions. Thus, it would be extremely beneficial for the nano- and pico-satellite community if a micro propulsion system capable of full-authority attitude control and orbital maneuver is developed. This paper describes the limiting characteristics of the refrigerant-based propellant (such as 1,1,1,2-Tetraflurorethan <R-134a> or 1,1-difluoroethane <R-152a>) for the cold gas systems that is currently under development.

The Optimal Control of Some Attitude Control Systems for Different Performance Criteria

1963 ◽  
Vol 85 (2) ◽  
pp. 165-175 ◽  
Author(s):  
I. Flugge-Lotz ◽  
H. Marbach
Keyword(s):  
Optimal Control ◽  
Control Systems ◽  
Attitude Control ◽  
Phase Plane ◽  
Optimal Choice ◽  
Performance Criteria ◽  
Optimal Switching ◽  
Two Phase ◽  
Control Functions ◽  
Parameter Values

Optimal control functions in the sense of minimum settling time and minimum fuel or energy consumption are derived for several different single-axis attitude control systems. The systems treated differ only in the mechanism used to produce control torque. The torque producing elements considered include, (i) reaction gas jets, with either one or two discrete levels of thrust, (ii) an armature controlled d-c motor, (iii) a two-phase a-c motor. Optimal switching curves for these systems are illustrated in the phase plane, and the optimal choice of system parameter values is discussed.

Effect of Shock Loading on the Microstructure of Uniloy 326

1974 ◽  
Vol 32 ◽  
pp. 504-505
Author(s):  
K. P. Staudhammer ◽  
L. E. Murr
Keyword(s):  
Grain Size ◽  
Shock Loading ◽  
Current Investigation ◽  
Two Phase ◽  
05 C ◽  
Shock Deformation ◽  
Heat Treated

The effect of shock loading on a variety of steels has been reviewed recently by Leslie. It is generally observed that significant changes in microstructure and microhardness are produced by explosive shock deformation. While the effect of shock loading on austenitic, ferritic, martensitic, and pearlitic structures has been investigated, there have been no systematic studies of the shock-loading of microduplex structures.In the current investigation, the shock-loading response of millrolled and heat-treated Uniloy 326 (thickness 60 mil) having a residual grain size of 1 to 2μ before shock loading was studied. Uniloy 326 is a two phase (microduplex) alloy consisting of 30% austenite (γ) in a ferrite (α) matrix; with the composition.3% Ti, 1% Mn, .6% Si,.05% C, 6% Ni, 26% Cr, balance Fe.

Exsolution and inversion in pigeonite from the Whin Sill, Northern England

1978 ◽  
Vol 36 (1) ◽  
pp. 474-475
Author(s):  
P.P.K. Smith
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Homogeneous Nucleation ◽  
Silicate Mineral ◽  
Antiphase Boundaries ◽  
Two Phase ◽  
Primitive Form ◽  
The Core ◽  
Nucleation Mechanisms ◽  
And Inversion

Grains of pigeonite, a calcium-poor silicate mineral of the pyroxene group, from the Whin Sill dolerite have been ion-thinned and examined by TEM. The pigeonite is strongly zoned chemically from the composition Wo8En64FS28 in the core to Wo13En34FS53 at the rim. Two phase transformations have occurred during the cooling of this pigeonite:- exsolution of augite, a more calcic pyroxene, and inversion of the pigeonite from the high- temperature C face-centred form to the low-temperature primitive form, with the formation of antiphase boundaries (APB's). Different sequences of these exsolution and inversion reactions, together with different nucleation mechanisms of the augite, have created three distinct microstructures depending on the position in the grain.In the core of the grains small platelets of augite about 0.02μm thick have farmed parallel to the (001) plane (Fig. 1). These are thought to have exsolved by homogeneous nucleation. Subsequently the inversion of the pigeonite has led to the creation of APB's.

Shock consolidation of Ni-Ti alloy powder

1986 ◽  
Vol 44 ◽  
pp. 430-431
Author(s):  
Naresh N. Thadhani ◽  
Thad Vreeland ◽  
Thomas J. Ahrens
Keyword(s):  
Alloy Powder ◽  
Amorphous Material ◽  
Ti Alloy ◽  
Two Phase ◽  
Near Surface ◽  
Optical Micrograph ◽  
Shock Compaction ◽  
Powder Particles ◽  
Ti Powder ◽  
Rapidly Solidified

A spherically-shaped, microcrystalline Ni-Ti alloy powder having fairly nonhomogeneous particle size distribution and chemical composition was consolidated with shock input energy of 316 kJ/kg. In the process of consolidation, shock energy is preferentially input at particle surfaces, resulting in melting of near-surface material and interparticle welding. The Ni-Ti powder particles were 2-60 μm in diameter (Fig. 1). About 30-40% of the powder particles were Ni-65wt% and balance were Ni-45wt%Ti (estimated by EMPA).Upon shock compaction, the two phase Ni-Ti powder particles were bonded together by the interparticle melt which rapidly solidified, usually to amorphous material. Fig. 2 is an optical micrograph (in plane of shock) of the consolidated Ni-Ti alloy powder, showing the particles with different etching contrast.

A Comparison of Tem and Apfim to the Interpretation of Modulated Microstructures

1985 ◽  
Vol 43 ◽  
pp. 70-71
Author(s):  
M.G. Burke ◽  
M.K. Miller
Keyword(s):  
Low Temperature ◽  
Microstructural Characterization ◽  
Superlattice Reflection ◽  
High Volume ◽  
Atom Probe ◽  
Dark Field ◽  
Miscibility Gap ◽  
Second Phase ◽  
Two Phase ◽  
Probe Field

Interpretation of fine-scale microstructures containing high volume fractions of second phase is complex. In particular, microstructures developed through decomposition within low temperature miscibility gaps may be extremely fine. This paper compares the morphological interpretations of such complex microstructures by the high-resolution techniques of TEM and atom probe field-ion microscopy (APFIM).The Fe-25 at% Be alloy selected for this study was aged within the low temperature miscibility gap to form a <100> aligned two-phase microstructure. This triaxially modulated microstructure is composed of an Fe-rich ferrite phase and a B2-ordered Be-enriched phase. The microstructural characterization through conventional bright-field TEM is inadequate because of the many contributions to image contrast. The ordering reaction which accompanies spinodal decomposition in this alloy permits simplification of the image by the use of the centered dark field technique to image just one phase. A CDF image formed with a B2 superlattice reflection is shown in fig. 1. In this CDF micrograph, the the B2-ordered Be-enriched phase appears as bright regions in the darkly-imaging ferrite. By examining the specimen in a [001] orientation, the <100> nature of the modulations is evident.

A TEM study of the influence of microstructure on the superplastic behavior of a U-5.8 wt.% Nb alloy

1986 ◽  
Vol 44 ◽  
pp. 568-569
Author(s):  
G. Mackiewicz Ludtka
Keyword(s):  
Grain Size ◽  
Heating Rate ◽  
Phase Field ◽  
Single Phase ◽  
Superplastic Behavior ◽  
Two Phase ◽  
Single Phase Field

Historically, metals exhibit superplasticity only while forming in a two-phase field because a two-phase microstructure helps ensure a fine, stable grain size. In the U-5.8 Nb alloy, superplastici ty exists for up to 2 h in the single phase field (γ1) at 670°C. This is above the equilibrium monotectoid temperature of 647°C. Utilizing dilatometry, the superplastic (SP) U-5.8 Nb alloy requires superheating to 658°C to initiate the α+γ2 → γ1 transformation at a heating rate of 1.5°C/s. Hence, the U-5.8 Nb alloy exhibits an anomolous superplastic behavior.

Transition alpha structure in beta-isomorphous Nb-Hf alloys

1987 ◽  
Vol 45 ◽  
pp. 232-233
Author(s):  
R.W. Carpenter ◽  
Changhai Li ◽  
David J. Smith
Keyword(s):  
Solid Solution ◽  
Solution Phase ◽  
Miscibility Gap ◽  
Large Strains ◽  
Solid Solution Phase ◽  
Two Phase ◽  
Diffuse Intensity ◽  
Metastable Form ◽  
The Matrix ◽  
Equilibrium Morphology

Binary Nb-Hf alloys exhibit a wide bcc solid solution phase field at temperatures above the Hfα→ß transition (2023K) and a two phase bcc+hcp field at lower temperatures. The β solvus exhibits a small slope above about 1500K, suggesting the possible existence of a miscibility gap. An earlier investigation showed that two morphological forms of precipitate occur during the bcc→hcp transformation. The equilibrium morphology is rod-type with axes along <113> bcc. The crystallographic habit of the rod precipitate follows the Burgers relations: {110}||{0001}, <112> || <1010>. The earlier metastable form, transition α, occurs as thin discs with {100} habit. The {100} discs induce large strains in the matrix. Selected area diffraction examination of regions ∼2 microns in diameter containing many disc precipitates showed that, a diffuse intensity distribution whose symmetry resembled the distribution of equilibrium α Bragg spots was associated with the disc precipitate.

Using crystallographic symmetry in diffraction and contrast analysis

1989 ◽  
Vol 47 ◽  
pp. 504-505
Author(s):  
U. Dahmen ◽  
K.H. Westmacott
Keyword(s):  
Electron Microscopy ◽  
High Symmetry ◽  
Two Phase ◽  
Tem Analysis ◽  
Crystallographic Symmetry ◽  
The Matrix ◽  
Contrast Analysis ◽  
Practical Tool ◽  
Convergent Beam ◽  
Beam Diffraction

Despite the increased use of convergent beam diffraction, symmetry concepts in their more general form are not commonly applied as a practical tool in electron microscopy. Crystal symmetry provides an abundance of information that can be used to facilitate and improve the TEM analysis of crystalline solids. This paper draws attention to some aspects of symmetry that can be put to practical use in the analysis of structures and morphologies of two-phase materials.It has been shown that the symmetry of the matrix that relates different variants of a precipitate can be used to determine the axis of needle- or lath-shaped precipitates or the habit plane of plate-shaped precipitates. By tilting to a special high symmetry orientation of the matrix and by measuring angles between symmetry-related variants of the precipitate it is possible to find their habit from a single micrograph.

Sign in / Sign up

Export Citation Format

Share Document