scholarly journals PRELIMINARY STUDIES ON AIR POLLUTION TOLERANCE INDEX (APTI) OF SELECTED PLANT SPECIES IN BIKANER CITY

2021 ◽  
Vol 5 (2) ◽  
pp. 117-120
Author(s):  
Leela Kaur ◽  
Anuradha .

Air Pollution Tolerance Index is used to find out the level of air pollution in any area with the help of plants. Plants are categorized as sensitive, intermediate and tolerant based on their APTI values. The present study examines the Air Pollution Tolerance Index of selected plant species in Bikaner city. The APTI of various plants have been computed with the values obtained by analysis of biochemical parameters such as pH of leaf extract, ascorbic acid content (AAC), total leaf chlorophyll content (TLC) and leaf relative water content (RWC). It was found that plant species Khejri (Prosopis cineraria), Neem (Azadiracta indica), Babul (Acacia nilotica), Ber (Ziziphus nummularia), Aak (Calotropis procera) and Peepal (Ficus religiosa) showed APTI values in the range of 30 to 100 which are tolerant to air pollution. Datura stramonium was the only species which falls under the intermediate category due to its APTI value of 21.5. It is recommended that these plants can be grown on national highways to combat air pollution in arid areas. Such plants can be used in the development of green belt.

Author(s):  
Jessa Marie S. Caabay

Air pollution gives negative effects to humans as well as to plants which are exposed all throughout the day in these pollutants. Assessment of plants' response to air pollutants may serve as a fundamental method in terms of environmental monitoring and management. Sensitive group of plants can serve as an indicator of air quality while the tolerant ones can be sinks. TheAir Pollution Tolerance Index (APTI) of selected plant species in Puerto Princesa City, namely: Bougainvillea (Bougainvillea spectabilis), Santan (Ixoracoccinea), Fire Tree (Delonixregia), Golden Bush (Durantarepens), and Acacia tree (Samaneasaman)were evaluatedusing relative water content, ascorbic acid content, leaf extract pH, and total leaf chlorophyll content.It was found out that B. spectabiliswas the most tolerant species, followed by S. samanwhile D. regiahas an intermediate index. D. repensand I. coccineaon the other hand were found to be sensitive plant species. Plants with high APTI values are the tolerant ones and are recommended to be planted in urban areas to absorb and off certain harmful gaseous pollutants while the sensitive ones have the potential to serve as bio-indicators for evaluation and monitoring.


Author(s):  
M. Akilan ◽  
S. Nandhakumar

The impact of air pollutants on the biochemical characters of the selected plant species from industrial and urban areas was studied by calculating ascorbic acid, total chlorophyll, leaf extract pH and relative water content from leaf tissues. The air pollution tolerance index (APTI) values of the selected plants of different study areas revealed that the APTI values of the plants at the College Farm recorded low compared to Arcot and Ranipet transporation and industrial areas. Among the selected plant species, higher APTI values were recorded from the industrial and urban areas. when compared to areas free from industries and transport. The four selected plant species <italic>viz</italic>. <italic>Neerium oleander, Tamarindus indicus, Azardirecta indica</italic> and <italic>Pungamia pinnata, Neerium oleander</italic> recorded higher APTI values from the industrial and transportation that revealed more tolerance than the other selected plants.The statistical results revealed that Arcot was more polluted compared to Ranipet, and the college farm recorded least polluted due to less exposure to industries, transport and urbanization.


2014 ◽  
Vol 955-959 ◽  
pp. 797-801
Author(s):  
Chung Yi Chung ◽  
Pei Ling Chung ◽  
Hwa Sheng Gau ◽  
Ting Lun Huang ◽  
Wen Liang Lai ◽  
...  

Air pollution tolerance index (APTI) is used by landscapers to select plant species tolerant to air pollution. The present study evaluated APTI for selected ten common plant species, which were fumigated with 40 ppb sulfur dioxide (SO2) gas for 210 days. The APTI is used by landscapers to select plant species tolerant to air pollution. In order to develop the usefulness of plants as indicators requires an appropriate selection of plant species, which is of utmost importance in specific situations. Four biochemical parameters, including ascorbic acid content, leaf extract pH, total leaf chlorophyll, and leaf relative water content were used to develop an APTI. The results showed that plants have the potential to serve as excellent quantitative and qualitative indices of pollution. Since biomonitoring of plants is an important tool by which to evaluate the impact of air pollution on plants, Diospyros maritime is a good selection as an index of SO2 pollution. The order of tolerance in SO2 as Diospyros maritime > Diospyros discolor > Decusscarpus nagi > Cerbera manghas > Delonix regia > Melia azedarach > Machilus zuihoensis > Ficus sepitca > Erythrina variegate > Messerschmidia argentea.


2018 ◽  
Vol 24 (1) ◽  
Author(s):  
NEEL RATAN ◽  
MILAN YADAV ◽  
U.N. SINGH

Air pollution tolerance index (APTI) was calculated for various plant species growing in industrial area of Orai. The leaf samples collected from 24 tree species in the industrial area were used to determine their Air Pollution Tolerance Index (APTI) by calculating the ascorbic acid, chlorophyll, pH and relative water contents. The APTI values of less than 16 are reported in 19 species and they can be used as indicators of air pollution. The species Ficus religiosa (24.92), Zizyphus jujuba (21.84), Phyllanthus emblica (17.40), Cassia fistula (17.67) and Tamarindus indica (16.96) showed their moderate response by changing their biochemical contents and were identified as moderately tolerant to air pollution.


2021 ◽  
Vol 2 (2) ◽  
pp. 257-263
Author(s):  
Kirthika S ◽  
Vishnuprasad V

With rapid increase in urbanization followed by industrialization compounded due to ever-exploding population in the past few decades there is a steep rise in contamination of one of the most vital abiotic factors of the environment i.e., the air. In these circumstances, the clean and green measures to monitor and control air pollution have become inevitable. Air Pollution Tolerance Index (APTI) is one such index for indicating the extent of the plants to withstand air pollution. This includes analysis of physiological and biochemical parameters like total chlorophyll content, ascorbic acid content, pH of the leaf extract and relative water content of the leaves. In this study, the plants selected are mature tree species like Polyalthia longifolia, Putranjiva roxburghii, Alstonia scholaris, Delonix regia and Peltophorum pterocarpum from Mumbai and its surrounding regions. According to the Air Pollution Tolerance Index (APTI) values, plants can be classified as tolerant, intermediate, sensitive and highly sensitive. The tolerance of the plants studied in the decreasing order is as follows P. roxburghii > P. pterocarpum > D. regia > P. longifolia > A. scholaris. Species selected on the basis of their APTI values can then be used as bio-indicators of air pollution and in its mitigation for green belt development in urban areas.


2017 ◽  
Vol 9 (1) ◽  
pp. 196-200
Author(s):  
Navjot Singh Kaler ◽  
S. K. Bhardwaj ◽  
R.K. Gupta

The study examined the Air Pollution Tolerance Index (APTI) of selected plant species growing along national highway-22 from Parwanoo to Solan, falling in Solan district of Himachal Pradesh, India. Four species namely Grewiaoptiva, Toonaciliata, Melia azedarach and Woodfordia floribunda of uniform size, age, spread and common in occurrence on both sides of the highway are selected. Leaf samples were collected from selected spe-cies and used to estimate four physiological and biochemical parameters, namely; leaf relative water content (RWC), ascorbic acid content (AA), total leaf chlorophyll (TChl) and leaf extract pH were used to compute the APTI values. The trend of APTI recorded for various species was Melia azedarach (18.37) >Grewiaoptiva(8.77) >Woodfordia floribunda (7.43) >Toonaciliata(6.82). The APTI also varied with seasons of the year. The highest APTI was noticed in rainy followed by winter and summer season. The study indicated Melia azedarach as most tolerant and Toonaciliataas most sensitive species to air pollution.


Author(s):  
Jiban Jyoti Das

Industrialization is an important aspect of a growing economy. However, rapid industrialization has caused many serious impacts on the environment. One such impact is the deteriorating air quality, especially around industries. It is said that afforestation is the best and simplest way for improving the air quality. Also, trees and plants have been increasingly used as filters for dust particles around the home, traffic roads, etc. In scientific studies, it has also been found that trees and plant leaves can be used to assess the ambient air quality by an index called the Air pollution tolerance index. A literature search has been done on the scientific database like Sciencedirect and Researchgate to review the existing knowledge of Air pollution tolerance index and to find the tolerant and sensitive species based on it so that these species can be selectively planted to assess the ambient air quality and also to develop a better green belt around refineries and industries in Assam. The study has reviewed the linkage of the impact of air pollution on leaves of plants and trees through scientific evidence. Through such scientific reviews, the most tolerant species of trees and plants were chosen with the condition that it can grow under the climatic condition of Assam. The recommendation and suggestions of tolerant tree and plant species can be used for specific species plantations for developing green belts around refineries and industries in Assam. The recommendation of sensitive species can be used for monitoring ambient air quality with reference to other standard procedures. KEYWORDS: Air pollution tolerance index, Industries, Air- pollution, Green belt


Author(s):  
Krishnaveni M. ◽  
M . Saran Kumar ◽  
Anithasri G. ◽  
Nanthini S. ◽  
Gowsalya K. ◽  
...  

Air pollution due to huge number of vehicles emitting toxic gas poisons both living environment affecting fauna and flora. Road side plants are affected mostly by pollution as they are primary acceptors and gets reflected in terms of tolerance and sensitivity to pollution. Hence, the present work was designed to study the air pollution tolerance (APTI) using biochemical parameters and anticipated performance index (API) of the plants collected near seven different locations. Among the plants assessed, all plants selected does not show much difference in ascorbic acid, total chlorophyll, pH, relative water content, but that slight difference exhibited variations in air pollution tolerance index. Pongamia pinnata (33.16), Ficus religiosa (34.05) Near Asian rubber Industry, Kandampatty Byepass, Salem was found to be a tolerant species, Polyalthia longifolia (8.21) as very sensitive in plants studied Near KMB Granites Pvt. Ltd. Kottagoundampatty, Salem, and the rest was found to be moderately tolerent. Since, the studied plants show lesser surface area, the amount of dust collected was also less, which might be due to the climatic condition prevailed at that time of sample collection. Likewise, the API was found to be excellent in Yercaud lake view and very good in study area Duroflex company, Karimangalam, Dharmapuri, poor in study area Thanithotty Quarry, Salem as well as in KMB granites Pvt.Ltd. and good for the remaining three locations. So, the sensitive plants has to be protected that are located in these sites to reduce the pollution load.


Sign in / Sign up

Export Citation Format

Share Document